DOWNLOAD Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man36) Service Manual ↓ Size: 1.37 MB | Pages: 3 in PDF or view online for FREE

Model
MX-4100N MX-4101N MX-5000N MX-5001N (serv.man36)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
1.37 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Service Manual-Details Of Each Section-(Q)Fan Section
File
mx-4100n-mx-4101n-mx-5000n-mx-5001n-sm36.pdf
Date

Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man36) Service Manual ▷ View online

MX-4101N  FAN SECTION  Q – 1
MX-4101N
Service Manual
 
[Q] FAN SECTION
1.  Disassembly and assembly
A. Fan motor
(1) Rear cooling fan motor
1)
Remove the rear cabinet.
2)
Open the control box.
3)
Disconnect the connector and remove the screw, and remove
the duct.
4)
Disconnect the connector and remove the screw, and remove
the rear cooling fan motor.
* When installing, put the fan label (A) facing outside, and be
careful of the pulling direction of the harness (B).
(2) Ozone fan motor
1)
Remove the rear cabinet.
2)
Open the control box. 
3)
Remove the filter box unit.
Parts
a
Rear cooling fan motor
b
Ozone fan motor
c
Power cooling fan motor
d
Power cooling fan motor2
e
Controller cooling fan motor
f
Fusing fan motor
g
Process air inlet fan motor
h
LSU cooling fan motor
i
Cartridge cooling fan motor
b
e
f
a
c
d
g
h
i
A
B
MX-4101N  FAN SECTION  Q – 2
4)
Disconnect the connector and remove the screw, and remove
the ozone fan motor from the filter box unit.
(3) Power cooling fan motor
1)
Remove the rear cabinet.
2)
Open the control box. 
3)
Remove the filter box unit.
4)
Disconnect the connector and remove the screw, and remove
the power cooling fan.
* When installing, put the fan label (A) facing outside, and
arrange the engraved mark (B) in the blowing direction with
the arrow direction (C) of the metal plate. 
(4) Power cooling fan motor2
1)
Remove the rear cabinet.
2)
Open the control box.
3)
Remove the filter box unit.
4)
Remove the screw, the reactor and disconnect the connector,
and remove the AC power PWB unit.
5)
Disconnect the connector. Open the wire saddle, and remove
the harness. Remove the screw, and remove the DC power
unit.
6)
Remove the screw, and remove the power cooling fan motor.
* When installing, put the fan label (A) facing inside, and the
harness (B) facing upward.
(5) Controller cooling fan motor
1)
Remove the right cabinet rear cover.
2)
Remove the screw, and pull out the MFP cnt PWB.
B
A
C
A
B
MX-4101N  FAN SECTION  Q – 3
3)
Disconnect the connector and remove the screw, and remove
the controller cooling fan motor.
* When installing, put the fan label (A) facing outside, and the
harness (B) facing downward.
(6) Fusing fan motor
1)
Remove the paper exit unit.
2)
Remove the screw and disconnect the connector, and remove
the fusing fan motor.
* When installing, put the fan label (A) facing inside, and the
harness (B) facing downward.
(7) Process air inlet fan motor
1)
Remove the LSU.
2)
Remove the screw. Remove the duct. At the unit on  its side
and disconnect the connector.
3)
Remove the screw and the snap band, and remove the pro-
cess air inlet fan motor.
(8) LSU cooling fan motor
1)
Remove the LSU.
2)
Remove the screw, and remove the LSU CNT PWB cover R.
3)
Disconnect the connector and remove the screw, and remove
the LSU cooling fan motor.
(9) Cartridge cooling fan motor
1)
Remove the screw (A) and disconnect the connector (B).
Remove the drive rear exhaust duct unit.
2)
Remove the screw (C) and disconnect the connector and the
harness. Remove the cartridge cooling fan motor.
B
A
A
B
A
B
C
D
D
A
Display

Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man36) Service Manual ▷ Download

  • DOWNLOAD Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man36) Service Manual ↓ Size: 1.37 MB | Pages: 3 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man36) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man36) Copying Equipment. Information contained in Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man36) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.