Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man9) Service Manual ▷ View online
MX-4070N MX-PN15B/C/D (PUNCH MODULE) 12 – 11
50) Fix the connector cover with the screw.
B. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet, and
turn ON the main power switch and the operation panel power
switch.
turn ON the main power switch and the operation panel power
switch.
MX-4070N MX-FN30 (FINISHER) 13 – 1
MX-4070N
Service Manual
[13] MX-FN30 (FINISHER)
1. Unpacking
A. Packed items check
B. Removal of the finisher
NOTE: It is recommendable to work by two or more persons.
1)
Open the box, and take out the accessary boxes, packed items,
and cushioning materials.
and cushioning materials.
2)
While holding the upper parts of the main unit and lifting the one
side of the machine, remove the cushioning materials. At this
time, be sure to hold up the plastic bag of the lifting side.
side of the machine, remove the cushioning materials. At this
time, be sure to hold up the plastic bag of the lifting side.
3)
While holding the upper parts of the main unit and lifting the oppo-
site side of Step.2), remove the cushioning materials and the plas-
tic bag.
site side of Step.2), remove the cushioning materials and the plas-
tic bag.
4)
Remove the slope plates (x2) and the fixing pins (x2). Fixing pins
are attached to the slope plate with the tape.
are attached to the slope plate with the tape.
5)
Align the line on the pallet and the arrow mark on the slope plate,
and mount the slope plates (x2) to the pallet with the screws (x2).
and mount the slope plates (x2) to the pallet with the screws (x2).
6)
Put the casters of the main unit on the slope plates, and then
slowly move the main unit to the floor.
slowly move the main unit to the floor.
No.
Name
Quantity
1
Connection guide plate
1
2
Interface pass guide
1
3
Earth plate
1
4
Stapler unit staple case
1
5
Screw (M4× 14 S- tight)
4
6
Screw (M3× 6 S- tight)
5
7
Staple position label (for scanner)
1
8
Staple position label (for RSPF)
1
1
2
3
4
5
6
7
8
MX-4070N MX-FN30 (FINISHER) 13 – 2
C. Removal of the fixing tape and protection
material
1)
Remove all fixing tapes/protection materials from the exterior.
2)
Open the front upper cover. Remove all tapes and take out the
protection materials from the stapler section.
protection materials from the stapler section.
3)
Close the front upper cover.
Ĭ
ĭ
Į
į
İ
ı
ı
IJ
ij
MX-4070N MX-FN30 (FINISHER) 13 – 3
2. Installation
Check the firmware version.
If the firmware version is old, update the firmware.
Before starting the installation work, be sure to turn OFF the power
switch of the operation panel and the main power switch on the main
unit, and remove the power plug from the socket.
switch of the operation panel and the main power switch on the main
unit, and remove the power plug from the socket.
Check that the data lamp of the operation panel is not lit or blinking
before the installation work.
before the installation work.
A. Preparation on the main unit
1)
Install the connection guide plate (Packed item No1.) with the
screws (x4) (Packed items No.5 M4x14 S- tight).
screws (x4) (Packed items No.5 M4x14 S- tight).
2)
Insert the rib of the interface pass guide (Packed item No.2) into
the hole of the main unit, and install it with the screw (Packed item
No.6 M3x6 S- tight).
the hole of the main unit, and install it with the screw (Packed item
No.6 M3x6 S- tight).
B. Installation of the earth plate
1)
Install the earth plate (Packed items No.3) with the screws (x2)
(Packed item No.6 M3x6).
(Packed item No.6 M3x6).
C. Installation of the stapler unit staple case
1)
Open the front cover. Install the stapler unit staple case (Packed
item No.4) into the stapler unit.
item No.4) into the stapler unit.
NOTE: The staple unit cannot be fixed if the power is OFF. When
installing the stapler unit staple case, insert it while holding it
so that the stapler unit cannot go deep inside.
so that the stapler unit cannot go deep inside.
A
B
C
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man9) service manuals if exist.