Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man9) Service Manual ▷ View online
MX-4070N MX-PN15B/C/D (PUNCH MODULE) 12 – 7
29) Install the punch unit (Packed item No.1).
30) Turn the punch unit with the operation section facing upward.
31) Insert the punch unit from the right side of the finisher.
32) Fix the punch unit to the frame of the finisher with the screws (x2).
33) Attach the stepping motor (Packed item No.7) from the right side
of the finisher.
34) Fix the stepping motor (Packed item No.7) to the frame of the fin-
isher with the screws (x2).
35) Connect each harness with the punch unit PWB.
Stepping motor (No.7) connector
Resist sensor (No.2) connector
MX-4070N MX-PN15B/C/D (PUNCH MODULE) 12 – 8
36) Connect the harness (Packed item No.8: Shorter harness) with
the punch unit PWB.
37) Connect the opposite side of the harness (Packed item No.8:
shorter harness) with the interface connector.
Stepping motor (No.7) connector
Resist sensor (No.2) connector
Harness (No.8)
Harness (no.8)
Harness (no.8)
MX-4070N MX-PN15B/C/D (PUNCH MODULE) 12 – 9
38) Pass the harness through the wire saddle.
39) Tie the harness, and pass it through the wire saddle so that it can
be fixed tightly.
40) Install the rear cabinet of the finisher with the screw.
41) Insert the hopper from the front side of the finisher, and push the
hopper as far as it goes.
42) Cut the cover section of the finisher shown in the figure below with
the nipper.
43) For MX-FN29 (Saddle finisher), connect the interface connector
connected to the inner cover.
MX-4070N MX-PN15B/C/D (PUNCH MODULE) 12 – 10
44) Install the inner cover of the finisher with the screw.
45) Install the knobs (x2).
46) For MX-FN29 (Saddle finisher), also install the knob shown in the
figure below.
47) After installing the finisher to the main unit, fix the position shown
in the figure below with the screw. (Use the screw removed at
Step 11.)
Step 11.)
48) Close the front door of the finisher.
49) Fix the harness section of the interface unit, and connect the har-
ness.
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man9) service manuals if exist.