Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man9) Service Manual ▷ View online
MX-4070N MX-FN28 (FINISHER) 10 – 5
8)
Fix the plate with the tied cables to the main unit with the screw
(M3x6), and connect the connector of the harness. Tie the har-
ness of the interface unit and the harness of the finisher with the
clamp, and fix it.
(M3x6), and connect the connector of the harness. Tie the har-
ness of the interface unit and the harness of the finisher with the
clamp, and fix it.
9)
Fix the connector cover of the main unit with the screw.
MX-4070N MX-FN29 (SADDLE STITCH FINISHER) 11 – 1
MX-4070N
Service Manual
[11] MX-FN29 (SADDLE STITCH FINISHER)
1. Unpacking
A. Packed items check
B. Removal of the saddle finisher
NOTE: It is recommendable to work by two or more persons.
1)
Cut the tapes at four corners, and remove the fixture.
2)
Take off the top case, and remove the cushioning materials.
3)
Take out the finisher from the plastic bag.
While holding the upper parts of the finisher by two people, pull up
the finisher, and then make it stand upright.
the finisher, and then make it stand upright.
C. Removal of the fixing tape and protection
material
1)
Remove the fixing tape/protection materials.
2)
Open the front upper cover, and remove the fixing tape/protection
materials.
materials.
No.
Name
Quantity
1
Shift tray
1
2
Guide plate
1
3
Screw (M3x6)
5
4
Screw (M4x8)
1
5
Screw (M4x12)
4
6
Earth plate
1
7
Bracket
1
8
Saddle tray
1
1
2
3
4
5
6
7
8
MX-4070N MX-FN29 (SADDLE STITCH FINISHER) 11 – 2
2. Installation
A. Installation of earth plate
1)
Install the earth plate (Packed items (No.6)) with the screws
(Packed item (No.3 M3x6)).
(Packed item (No.3 M3x6)).
B. Installation of the guide plate
1)
Install the guide plate (Packed items (No.2)) with the screws
(Packed item (No.3 M3x6)). For the positions of the screws,
please see the picture below.
(Packed item (No.3 M3x6)). For the positions of the screws,
please see the picture below.
C. Installation of the shift tray
1)
Insert the shift tray (Packed item No.1) into the finisher of the main
unit, and install the shift tray with the screw (Packed item No.4
M4x8)).
unit, and install the shift tray with the screw (Packed item No.4
M4x8)).
MX-4070N MX-FN29 (SADDLE STITCH FINISHER) 11 – 3
D. Installation of the bracket
1)
Install the bracket (Packed item No.7) with the screw (Packed
item (No.5 M4x12). Before installing the finisher, be sure to install
the interface unit.
item (No.5 M4x12). Before installing the finisher, be sure to install
the interface unit.
E. Installation of the finisher
1)
Attach the connector of the finisher and fix it with the screw.
2)
Open the front cover.
3)
Remove the screw fixing the finisher in the picture below.
Pull out the lock lever, and lower it.
Ĭ
ĭ
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man9) service manuals if exist.