Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man9) Service Manual ▷ View online
MX-4070N MX-FN28 (FINISHER) 10 – 1
MX-4070N
Service Manual
[10] MX-FN28 (FINISHER)
1. Unpacking
A. Packed items check
B. Removal of the finisher
NOTE: It is recommendable to work by two or more persons.
1)
Cut the tapes at four corners, and remove the fixture.
2)
Take off the top case, and remove the cushioning materials.
3)
Take out the finisher from the plastic bag.
While holding the upper parts of the finisher by two people, pull up
the finisher, and then make it stand upright.
the finisher, and then make it stand upright.
C. Removal of the fixing tape and protection
material
1)
Remove the fixing tape/protection materials.
2)
Open the front upper cover, and remove the fixing tape/protection
materials.
materials.
No.
Name
Quantity
1
Shift tray
1
2
Guide plate
1
3
Screw (M3x6)
5
4
Screw (M4x8)
1
5
Screw (M4x12)
4
6
Earth plate
1
7
Bracket
1
1
2
3
4
5
6
7
MX-4070N MX-FN28 (FINISHER) 10 – 2
2. Installation
A. Installation of earth plate
1)
Install the earth plate (Packed items (No.6)) with the screws
(Packed item (No.3 M3x6)).
(Packed item (No.3 M3x6)).
B. Installation of the guide plate
1)
Install the guide plate (Packed items (No.2)) with the screws
(Packed item (No.3 M3x6)). For the positions of the screws,
please see the picture below.
(Packed item (No.3 M3x6)). For the positions of the screws,
please see the picture below.
C. Installation of the shift tray
1)
Insert the shift tray (Packed item No.1) into the finisher of the main
unit, and install the shift tray with the screw (Packed item No.4
M4x8)).
unit, and install the shift tray with the screw (Packed item No.4
M4x8)).
MX-4070N MX-FN28 (FINISHER) 10 – 3
D. Installation of the bracket
1)
Install the bracket (Packed item No.7) with the screw (Packed
item (No.5 M4x12). Before installing the finisher, be sure to install
the interface unit.
item (No.5 M4x12). Before installing the finisher, be sure to install
the interface unit.
E. Installation of the finisher
1)
Attach the connector of the finisher and fix it with the screw.
2)
Open the front cover.
3)
Remove the screw fixing the finisher in the picture below.
Pull out the lock lever, and lower it
Ĭ
ĭ
MX-4070N MX-FN28 (FINISHER) 10 – 4
4)
Bring the finisher near the main unit, and connect them.
5)
Install the finisher fixing screw.
6)
Close the front cover of the finisher.
7)
Unscrew the screw of the connector cover of the man unit, and
remove the connector cover.
remove the connector cover.
Front
Right side
Be careful not to fix
with the screw here.
with the screw here.
Push the lock lever.
Move the lock lever to
the upper side.
the upper side.
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man9) service manuals if exist.