DOWNLOAD Sharp MX-2300N / MX-2700N / MX-2300G / MX-2700G / MX-2300FG / MX-2700FG (serv.man20) Service Manual ↓ Size: 3.27 MB | Pages: 127 in PDF or view online for FREE

Scanning begins.

• If the original is placed on the document glass, the 

[Read-End] key appears in the touch panel. To scan only one 
original, go to step 8. To scan multiple originals, go to the 
next step.

• If the original was inserted in the document feeder tray, a 

beep will sound when scanning is completed and 
transmission will begin. Go to step 9.

Do not disconnect the USB memory until "Sending data has been completed." appears in the touch panel.

• To scan in full colour, press the [COLOUR START] key (

). To scan in black and white, press the [BLACK & 

WHITE START] key (

). If the colour mode of the [COLOUR START] key (

) is set to [Auto], the colour of 

the original will be detected automatically and scanning in full colour, greyscale or Mono 2 will take place.

• If the file type is [Encrypt PDF], a password entry screen will appear when the [START] key is pressed.

Touch the [Entry] key to open the keyboard screen, enter a password (maximum of 32 characters), and touch the 
[OK] key. The recipient must use the password entered here to open the encrypted PDF file.
To cancel encrypted PDF, touch the [Cancel] key. The format settings screen will appear to let you change the file 
type. Select a new file type and press the [START] key to begin transmission.

Repeat until all originals have been scanned.

The exposure, resolution, and scan size/send size can be changed for each original page that is scanned.

A beep will sound to indicate that the operation is completed.
Open the automatic document feeder and remove the original.

If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the 
transmission is reserved.

Please enter encrypt PDF
password.

Cancel

Entry

Place next original.       (Pg.No.x)
Press [Start].
When finished, press [Read-End]

Read-End

Do not disconnect the USB memory while "Processing data." or "Sending data." appear in the touch panel.

• When transmission to USB memory is completed, "Sending data has been completed." is displayed. After a brief interval 

the message is cleared and the base screen of image send mode reappears. (The base screen of image send mode is the 
screen that appears when the [IMAGE SEND] key on the operation panel is pressed.)

• If the USB memory becomes full during scanning...

If JPEG is selected for the file format or the "Specified Pages per File" checkbox is selected, a message will appear and 
scanning will stop. In this case, only the pages that were completely scanned will be stored in the USB device (except 
when multiple pages per file are specified).

• To cancel scanning...

Press the [STOP] key (

) to cancel the operation.

• To cancel scanning to USB memory...

While scan data is being stored in the USB memory, the message "Sending data." and the [Cancel] key appear in the 
touch panel. To cancel the storing operation, touch the [Cancel] key.

• System Settings (Administrator): Scan Settings

This is used to set the default colour mode and file format.

• System Settings (Administrator): Disable Scan Function

The use of PC scan mode and USB memory mode can be prohibited.

The exposure can be changed to match the darkness of the original. The exposure mode can be changed to match the 
original type.

When the exposure is set to [Auto], the 

 keys 

cannot be used.
The exposure darkens when the 

 key is touched, 

and lightens when the 

 key is touched.

To return to auto exposure adjustment, touch the [Auto] 
key.

Touch the original type key that matches the original type.

• When the exposure is set to [Auto], the exposure modes [Photo], [Printed Photo], and [Map] do not appear.

• To reduce the moiré effect when scanning printed matter, touch the [Moiré Reduction] checkbox so that a 

checkmark  

appears.

When using the document glass to scan multiple original pages, the exposure setting can be changed each time you change 
pages. When using the automatic document feeder, the exposure setting cannot be changed once scanning has begun. 
(However, when the special mode "Job Build" is used, the exposure can be changed each time a new set of originals is 
inserted.)

System Settings (Administrator): Default Exposure Settings
This is used to change the default exposure setting.

Special Modes

USB Mem. Scan

Mode Switch

Image

Settings

File Name

Auto

Exposure

200X200dpi

Resolution

PDF/PDF

File Format

Mono2/Auto

Colour Mode

Special Modes

Original

Auto    A4

USB Mem. Scan
Exposure

OK

Auto

Manual

Text/

Prtd.Photo

Text/Photo

Printed 

Photo

Text

Moiré Reduction

Photo

Map

1

5

3

Auto

This setting automatically adjusts the exposure for light and dark parts of the original.

Manual

1 to 2

Select this setting when the original consists of dark text.

3

Select this setting for a normal original (neither dark nor light).

4 to 5

Select this setting when the original consists mostly of faint text.

Text/Prtd. Photo

This mode provides the best balance for scanning an original which contains both text and 
printed photographs, such as a magazine or catalogue.

Text/Photo

This mode provides the best balance for scanning an original which contains both text and 
photographs, such as a text document with a photo pasted on.

Text

Use this mode for regular text documents.

Photo

Use this mode to scan photos.

Printed Photo

This mode is best for scanning printed photographs, such as photos in a magazine or 
catalogue.

Map

This mode is best for scanning the colour shading and fine details found on most maps.