DOWNLOAD Sharp MX-1800N (serv.man44) Service Manual ↓ Size: 4.25 MB | Pages: 127 in PDF or view online for FREE

Scanning begins.

• If you inserted the original pages in the document feeder 

tray, all pages are scanned.

• If you are scanning the original on the document glass, scan 

each page one page at a time.
When scanning finishes, place the next original and press 
the [BLACK & WHITE START] key (

). Repeat until all 

pages have been scanned and then press the [Read-End] 
key.

To cancel scanning...
To cancel scanning, press the [STOP] key (

) during scanning.

• If other documents have already been stored in the memory box, the document is added to the previously stored 

documents.

• The factory default setting for the number of polling times is "Once" (after the document is transmitted to the receiving 

machine, it is automatically cleared).

You can check a document in an F-code memory polling box (public box) by printing it out.

A document in a memory box cannot be printed while the document is being transmitted.

"

" appears in keys that have documents stored.

The document in the selected memory box is printed.

To cancel printing...
Touch the [Cancel] key.

Speaker

Resend

Quick File

File

Special Modes

Sub Address

Address Book

Fax

Mode Switch

Image

Settings

Direct TX

Memory TX

Auto Reception

Fax Memory:100%

Ready to send.

Fax
Special Modes

OK

2/3

Transaction 

Report

Own Name 

Select

Polling

Memory Box

Memory Box

Cancel

Print Data

Delete Data

Print Data

Data Store

Polling Memory

Confidential

Reception

Memory Box - Print Data

Cancel

 Box 1

 Box 3

 Box 5

 Box 2

 Box 4

 Box 6

 Box 7

Public Box

1/1

When a document in an F-code memory polling box is no longer needed, follow the steps below to delete it.

A document in a memory box cannot be deleted while the document is being transmitted.

"

" appears in keys that have documents stored.

The document in the selected memory box is deleted and you 
return to the screen of step 4.

To cancel the deletion...
Touch the [No] key. You will return to the screen of step 4 without deleting the document.

Speaker

Resend

Quick File

File

Special Modes

Sub Address

Address Book

Fax

Mode Switch

Image

Settings

Direct TX

Memory TX

Auto Reception

Fax Memory:100%

Ready to send.

Fax
Special Modes

OK

2/3

Transaction 

Report

Own Name 

Select

Polling

Memory Box

Memory Box

Cancel

Print Data

Delete Data

Print Data

Data Store

Polling Memory

Confidential

Reception

Memory Box - Delete Data

Cancel

 Box 1

 Box 3

 Box 5

 Box 2

 Box 4

 Box 6

 Box 7

Public Box

1/1

Delete the data in the memory box?

No

Yes

Box 1

This function is used to send a fax to an F-code memory box (relay broadcast) in another machine and have that 
machine relay the fax to multiple end receiving machines.
When the end receiving machines are far from your machine, sending the fax to a relay machine that is close to the end 
receiving machines can help reduce phone charges. A relay request transmission can be used in combination with the 
timer transmission function to further reduce phone costs.

• Verify the F-code (sub-address and passcode) and end receiving machines programmed in the memory box (relay 

broadcast) before you perform an F-code relay request transmission.

• Before this function can be used, the end receiving machines must be programmed in the F-code memory box (relay 

broadcast) in the relay machine.

• The end receiving machines do not need to support F-code communication.

• This function can be used in combination with a broadcast transmission or timer transmission. An F-code relay request 

transmission can also be stored in a program.

• Your machine (the machine that requests a relay broadcast transmission) only bears the cost of sending the fax to the 

other machine (the relay machine). The other machine (the relay machine) bears the cost of sending the fax to each of the 
end receiving machines.

System Settings for Fax: F-Code Memory Box
This is used to create memory boxes (relay broadcast) for F-code relay broadcast transmission.
A memory box name, sub-address, passcode, and end receiving machines are programmed in each box.

☞

 (page 155)

Transmission

The fax is transmitted to each of the 
end receiving machines programmed 
in the F-code relay broadcast memory 
box.

Relay machine
F-code relay broadcast 
memory box

Box name: BBBB
Sub-address: AAAAAAAA
Passcode: XXXXXXXX

Sub-address: AAAAAAAA
Passcode: XXXXXXXX

End receiving machines are 
programmed in this box.