Sharp AR-PE2 (serv.man6) Service Manual ▷ View online
3-23
3
System Software
T
O
PREPARE
FOR
INSTALLATION
USING
THE
PARALLEL
PORT
1.
Before installing system software, print the following from the Functions menu (if
possible):
possible):
• Configuration page—records the customer’s current Setup configuration.
The Setup configuration will be reset to the default configuration when the system
software is installed.
software is installed.
• Font List—details what fonts are resident on the Fiery AR-PE2 HDD. Along with the
fonts that are provided on the System Software CD, the customer may have installed
additional fonts that will be deleted when the system software is installed.
additional fonts that will be deleted when the system software is installed.
2.
Shut down the Fiery AR-PE2 as described on page 3-1, and power off the copier and the
PC.
PC.
3.
Connect an IEEE 1284 cable to the LPT1 port on your PC and to the parallel port on the
Fiery AR-PE2.
Fiery AR-PE2.
F
IGURE
3-10
Parallel port connector on the Fiery AR-PE2
Parallel port
3-24
3
Service Procedures
Now you are ready to install system software.
T
O
INSTALL
SYSTEM
SOFTWARE
1.
Make sure the copier is powered off.
2.
Power on the PC, then insert the System Software CD into the CD-ROM drive.
3.
In the Windows Start menu, select Programs, and click MS-DOS prompt to bring up an
MS-DOS window.
MS-DOS window.
Do not use the option to “Shut Down and Restart Windows in DOS mode.”
4.
At the MS-DOS prompt, navigate to the CD-ROM drive directory and do a dir command to
display the contents.
display the contents.
To find the correct letter for the CD-ROM drive, open the My Computer folder and
read the drive letter associated with the CD-ROM icon.
read the drive letter associated with the CD-ROM icon.
For each file, an information line of text is displayed in the MS-DOS window, including
file size and the full name of the file. Note the full filename, including its extension,
which is displayed at the end of the line of text. Also, note which file is smaller; you will
install the smaller file first.
file size and the full name of the file. Note the full filename, including its extension,
which is displayed at the end of the line of text. Also, note which file is smaller; you will
install the smaller file first.
5.
In the CD-ROM drive, type the following command at the MS-DOS prompt but do not press
the enter (or return) key yet:
the enter (or return) key yet:
copy filename1 lpt1 /b
filename1
refers to the full name of the smaller file on the System Software CD.
/b
specifies the binary option (not ASCII).
N
OTE
:
Make sure to spell the filename correctly. Do not press the enter (or return) key yet.
3-25
3
System Software
6.
Power on the copier and within 3 seconds (just after you hear the copier belt advance)
press the enter (return) key on the PC.
press the enter (return) key on the PC.
7.
Press the OFFLINE button on the copier LCD screen and then press the Fiery logo in the
upper right corner of the screen.
upper right corner of the screen.
8.
Wait for the following menu to appear.
Status messages
Downloading.....
and
Booting.......
appear first. If these messages do not
appear, recycle power to the copier and repeat this step, making sure to press enter
quickly. You can ignore the prompt, “Press any key to enter config mode.”
quickly. You can ignore the prompt, “Press any key to enter config mode.”
The DOS-type window on the PC will display a message that one file was copied.
9.
Type the following command at the MS-DOS prompt on the PC but do not press the enter
(or return) key yet:
(or return) key yet:
copy filename2 lpt1 /b
filename2
refers to the full name of the larger file on the System Software CD.
N
OTE
:
Make sure to spell the entire filename correctly. Do not press the enter (or return)
key yet.
10.
Press the Installation button from the menu on the copier LCD screen.
| Diagnostics >
| Resume Boot >
| Installation>
| Clear Server>
Choose Function
| Version info >
|
|
|
Choose Function
3-26
3
Service Procedures
11.
Wait while the following message is displayed.
12.
At the following message,
press the enter (or return) key on the PC and also press the
OK button on the copier LCD screen.
13.
Wait during the following message.
This step may take 15-30 minutes (or longer), depending on the PC.
14.
After a successful installation, press the OK button.
The DOS-type window on the PC will display a message that one file was copied.
15.
At the Service Menu, select Resume Boot, then press the OK button, and wait while the
Fiery AR-PE2 boots.
Fiery AR-PE2 boots.
| Diagnostics >
| Resume Boot >
| Installation>
| Clear Server>
Choose Function
| Version info >
|
|
|
Choose Function
Flushing parallel
port. Please wait
Press the enter (return) on the PC and also
press the OK key on the LCD screen
press the OK key on the LCD screen
Copy
installation
software to
parallel_port
Please wait
Installation
Installation was
successful.
Press the Set key
Click on the first or last page to see other AR-PE2 (serv.man6) service manuals if exist.