Sharp AR-PB2 (serv.man4) Service Manual ▷ View online
21) Negative Image printing
Display
Default
Contents
Unchecked
*
Normal (Positive) image printing.
Checked
Negative image printing.
22) Mirror Image printing
Display
Default
Contents
Unchecked
*
Normal image printing.
Checked
horizontally mirror image printing.
23) Scaling
Range
Display
Default
Function
Minimum
25
scaling rate is set to 25%
Maximum
400
scaling rate is set to 400%
Default
100
*
scaling rate is set to 10%
24) Correct Order Printing
Display
Default
Contents
Disable
*
Correct order printing is selected.
Enable
Reverse order printing is selected.
25) Smoothing Mechanism Setting
Display
Default
Contents
Not Installed
*
Smoothing function is not installed.
Installed
Smoothing function is installed.
AR-PB2
5 – 21
[6] Configuration Report and Test Page
1. Samples
2. Description of Each contents
This section defines the meaning of each item. These items are
basically used in configuration pages, but some contents are not
used depending on language.
basically used in configuration pages, but some contents are not
used depending on language.
A. Hardware Status
Machine Information
a. Resolution
Value:
600 dpi
Example:
600 dpi
Default:
600 dpi
Description: It is always 600 dpi.
b. Language
Value:
(English | Deutsch (German) | Francais (French)
|Italiano (Italian) | Nederlands (Dutch) | Espanol
(Spanish) |Svenska (Swedish)
|Italiano (Italian) | Nederlands (Dutch) | Espanol
(Spanish) |Svenska (Swedish)
Example:
English
Default:
Depends on copier language
Description: AR-PB2 includes seven language messages originally.
AR-PB2 decides the display language depending on the
language code sent from MAIN (MAIN sends the lan-
guage code based on its language ROM). This value
indicates the language that sent by MAIN to PRT.
language code sent from MAIN (MAIN sends the lan-
guage code based on its language ROM). This value
indicates the language that sent by MAIN to PRT.
AR-PB2
6 – 1
Hardware Specs
a. Base Memory
Value:
16 MB
Example:
16 MB
Default:
16 MB
Description: It indicates base memory quantity of the printer board.
Basically, this is fixed at 16 MB and it cannot be
changed.
changed.
b. Optional Memory
Value:
(0|16|32|48|64) MB
Example:
0MB
Default:
0MB
Description: It indicates the printer board’s optional memory quantity.
The customer (serviceman) could extend the memory
by attaching 72pin-SIMM. 0MB means optional memory
is not attached. 16MB or 32MB SIMM can be used to
this purpose.
by attaching 72pin-SIMM. 0MB means optional memory
is not attached. 16MB or 32MB SIMM can be used to
this purpose.
c. Total Memory
Value:
(16|32|48|64|80) MB
Example:
16MB
Default:
16MB
Description: It indicates the printer board’s total memory quantity. In
other words, it is summation of Base Memory and Op-
tion Memory.
tion Memory.
Version Information
a. PRT
Value:
#.##
Example:
2.00
Default:
Depends on printer firmware version
Description: This number should be same as the PRT-PRG ROM
version number seen on serviceman simulation 22-5.
b. BOOT
Value:
#.##
Example:
2.00
Default:
Depends on printer firmware version
c. ICU
Value:
#.##
Example:
2.00
Default:
Depends on printer firmware version
Description: This number should be same as the ICU ROM version
number seen on serviceman simulation 22-5.
Installed Device
a. Duplex Module
Value:
(Yes | No)
Example:
Yes
Default:
Depends on the Machine configuration
Description: It indicates that duplex unit is attached or not.It depends
on hardware configuration.
b. Output Device
Value:
(Standard 1 Tray | Standard 2 Trays | 3 Tray Finisher|2
Tray Finisher)
Tray Finisher)
Example:
3 Tray Finisher
Default:
Depends on the Machine configuration
Description: It indicates attached output device.. It depends on
hardware configuration.
c. Paper Input Trays
Value:
(2 trays | 3 trays | 4 trays)
Example:
2 trays
Default:
Depends on the Machine configuration
Description: It indicates the number of standard input trays.It
depends on hardware configuration.
d. Large Capacity Tray
Value:
(Yes | No)
Example:
Installed
Default:
Depends on the Machine configuration
Description: It indicates that large capacity paper input tray(Large
Capacity Tray) is attached or not. It depends on
hardware configuration.
hardware configuration.
e. Interface Board
Value:
(None | Ethernet | TokenRing)
Example:
Ethernet
Default:
Depends on the Machine configuration
Description: It indicates the kind of installed network card option to
the slot. 10Base-T/2 and 10/100Base-T are not iden-
tified. Those two will be reported as Ethernet.
TokenRing would not be supported for AR-PB1 (AR-
PB2) for Japan domestic.
tified. Those two will be reported as Ethernet.
TokenRing would not be supported for AR-PB1 (AR-
PB2) for Japan domestic.
Available Paper Size
Appearance on
Configuration Page
Description
Letter (81/2x11)
Letter / Long Edge Feed
Letter (81/2x11R)
Letter / Short Edge Feed
Legal (81/2x14)
Legal / Short Edge Feed
Ledger (11x17)
Ledger / Short Edge Feed
Executive (7 1/4x101/2)
Executive / Short Edge Feed
Invoice (5 1/2x81/2)
Invoice / Long Edge Feed
Foolscap (81/2x13)
Foolscap / Short Edge Feed1
A4
A4 / Long Edge Feed
A4R
A4 / Short Edge Feed
B5
B5 / Long Edge Feed
B5R
B5 / Short Edge Feed
B4
B4 / Short Edge Feed
A3
A3 / Short Edge Feed
A5
A5 / Long Edge Feed
A6
A6 / Short Edge Feed
Japanese Postcard
Japanese Postcard / Short Edge Feed
(Unknown)
Other size (EXTRA)
(No Paper)
No paper available on this tray.
(No Tray)
There is a problem with this tray.
(Tray Open)
This tray is opened (except Bypass-Tray)
or Tray is lifting up.
a. Tray 1 / Tray 2 / Tray 3 / Tray 4
Value:
[Appropriate Paper Size]
Example:
Letter (81/2x11)
Default:
Depends on paper tray configuration.
Description: It indicates paper size configuration of Tray 1 /2 / 3 / 4 /
5. It depends on hardware configuration, not software
condition.
(Unknown) means paper size cannot be identified. (Tray
configuration is "EXTRA".)
This line is not printed for unavailable tray.
condition.
(Unknown) means paper size cannot be identified. (Tray
configuration is "EXTRA".)
This line is not printed for unavailable tray.
b. Large Capacity Tray
Value:
[Appropriate Paper Size]
Example:
Letter (81/2x11)
AR-PB2
6 – 2
Default:
Depends on paper tray configuration.
Description: It indicates paper size configuration of Large Capacity
Tray. It depends on hardware configuration, not
software condition. When tray is opened, nothing is
printed at here.
This line is not printed when Large Capacity Tray is not
attached.
software condition. When tray is opened, nothing is
printed at here.
This line is not printed when Large Capacity Tray is not
attached.
c. Bypass-Tray
Value:
[Appropriate Paper Size]
Example:
Letter (81/2x11)
Default:
Depends on the paper size set on Bypass Tray.
Description: It indicates paper size of set on Bypass Tray. It depends
on detection of Bypass Tray paper size. (Unknown)
means paper size cannot be detected.
means paper size cannot be detected.
B. Software Information
PostScript Emulation
a. Job Time-out
Value:
# (variable length digit)
Example:
0
Default:
0
Description: This value indicates PostScript Job Time-out length
(seconds). If this time will pass from receiving the job
then PostScript interpreter will give up to print the job
and cancel.
then PostScript interpreter will give up to print the job
and cancel.
b. Manual Feed Time-out
Value:
# (variable length digit)
Example:
0
Default:
0
Description: This value indicates PostScript Manual Feed Time-out
length (seconds). If the print data break off during print-
ing and this time will pass, then PostScript interpreter
will cancel the print job. 0 means never time out.
ing and this time will pass, then PostScript interpreter
will cancel the print job. 0 means never time out.
c. Wait Time-out
Value:
# (variable length digit)
Example:
300
Default:
300
Description: This value indicates PostScript Wait Time-out length
(seconds). If the print data break off during printing and
this time will pass, then PostScript interpreter will cancel
the print job. 0 means never time out.
this time will pass, then PostScript interpreter will cancel
the print job. 0 means never time out.
PCL5e Emulation
This section tells PCL5e information. This section would not appear
on AR-PB1 (Siam) for Japan domestic.
on AR-PB1 (Siam) for Japan domestic.
a. Font Source
Value:
(Resident | Download)
Example:
Resident
Default:
Resident
Description: Current font source to print characters in PCL mode.
b. Font Number
Value:
0 to 45
Example:
0
Default:
0
Description: This is the current default font number used for plain
PCL job stream.
c. Font
Value:
(PCL font name)
Example:
Courier
Default:
Courier
Description: Current default font for PCL printing.
d. Pitch Size
Value:
# (variable length digit)
Example:
0.44 to 99.99 in 0.01 steps
Default:
10.00
Description: This is the current default pitch size for plain PCL job
stream.
e. Point Size
Value:
# (variable length digit)
Example:
4.00 to 999.75 in 0.25 steps
Default:
12.00
Description: This is the current default point size for plain PCL job
stream.
f. Symbol Set
Value:
(PCL symbol set name)
Example:
Roman-8
Default:
Roman-8
Description: This is the current default symbol set for plain PCL job
stream.
Network Information
a. NIC Serial Number
Value:
######
Example:
123456
Default:
Depends on NIC.
Description: It indicates the NIC’s serial number. This value is written
in NIC’s ROM (or flush ROM).
b. NIC Firmware Version
Value:
######
Example:
123456
Default:
Depends on NIC.
Description: It indicates the NIC’s serial number. This value is written
in NIC’s ROM (or flush ROM).
c. NetWare Print Server Name
Value:
[User Definable]
Example:
SHARP_990792
Default:
SHARP_[NIC card serial number]
Description: This value must reflect the printer name for IPX/SPX
(NetWare).
AR-PB2
6 – 3
Click on the first or last page to see other AR-PB2 (serv.man4) service manuals if exist.