Sharp AR-F151 (serv.man16) User Manual / Operation Manual ▷ View online
INITIAL SETTINGS
2-15
Setting Fine Resolution Priority
FUNCTION
GHI
DEF
or
ABC
STOP
STOP
For most faxing jobs, you will most likely want to specify the resolution. However,
you can also set a default resolution when no setting is made using the
RESOLUTION key. When Fine Resolution Priority is turned on, all faxes will be
sent in Fine Mode unless otherwise specified. To turn on this function, follow the
procedure below:
you can also set a default resolution when no setting is made using the
RESOLUTION key. When Fine Resolution Priority is turned on, all faxes will be
sent in Fine Mode unless otherwise specified. To turn on this function, follow the
procedure below:
Factory setting: 2 (OFF)
Step
Press these keys
Comments
1
“OPTION SETTING” will appear in
the display.
the display.
2
“FINE PRIORITY” will appear in the
display.
display.
3
Press 1 to turn Fine Resolution
Priority on, or 2 to turn it off.
Priority on, or 2 to turn it off.
4
Press the STOP key twice to exit.
Fax Setup
or
Setting Up the Unit for Use with a PC Modem
FUNCTION
GHI
ABC
ABC
STOP
STOP
The unit is set to automatically begin reception if you pick up from an extension
telephone and the unit detects a fax tone. However, if you are using a modem on the
same line, you must deactivate this function: otherwise the unit will mistakenly attempt
to receive the transmission from your computer. To turn off the Fax Signal Receive
function, follow the procedure below.
telephone and the unit detects a fax tone. However, if you are using a modem on the
same line, you must deactivate this function: otherwise the unit will mistakenly attempt
to receive the transmission from your computer. To turn off the Fax Signal Receive
function, follow the procedure below.
Note: If you turn off the Fax Signal Receive function, be sure to activate the Remote
Reception function. See “Using the Remote Reception Function” on the next
page for details on how to do this.
page for details on how to do this.
Factory setting: 1 (ON)
Step
Press these keys
Comments
1
“OPTION SETTING” will appear in
the display.
the display.
2
“FAX SIGNAL RCV.” will appear in the
display.
display.
3
Press 1 to turn Fax Signal Receive
on, or 2 to turn it off.
on, or 2 to turn it off.
4
Press the STOP key twice to exit.
02_INITAL.p65
3/22/00, 2:39 PM
15
INITIAL SETTINGS
2-16
Using the Remote Reception Function
or
FUNCTION
GHI
ABC
STOP
STOP
The unit’s Remote Reception feature is designed to allow you to activate fax reception
from a telephone directly connected to the unit. The Remote Reception function
operates even when the FAX Signal Receive function is turned off. See “Setting Up the
Unit for Use with a PC Modem” on the previous page. When you hear the fax tone,
simply press the one-digit Fax Remote Number (Factory setting: 5) and . Follow the
two procedures below to use this feature.
from a telephone directly connected to the unit. The Remote Reception function
operates even when the FAX Signal Receive function is turned off. See “Setting Up the
Unit for Use with a PC Modem” on the previous page. When you hear the fax tone,
simply press the one-digit Fax Remote Number (Factory setting: 5) and . Follow the
two procedures below to use this feature.
Notes:
•
•
If the extension phone is connected in parallel, you cannot use the Remote Reception
function.
function.
•
If documents are set in the SPF, the unit does not answer when you press the Fax
Remote Number and . However, if the originals are set in the SPF as part of a copy
job in progress, the unit answers when you press the Fax Remote Number and .
Remote Number and . However, if the originals are set in the SPF as part of a copy
job in progress, the unit answers when you press the Fax Remote Number and .
•
If you are not using a PC modem on the same line as your unit, and have not turned off
the Fax Signal Receive function, you do not need to make any changes to the Remote
Reception function. Simply use the factory settings. The unit will automatically take over
the line should you answer from the telephone directory connected to the unit and a fax
tone is detected.
the Fax Signal Receive function, you do not need to make any changes to the Remote
Reception function. Simply use the factory settings. The unit will automatically take over
the line should you answer from the telephone directory connected to the unit and a fax
tone is detected.
•
If you want to receive a fax while you are on an telephone directory connected to the
unit, when you hear a fax tone, press the one-digit Fax Remote Number and . To
ensure proper fax reception, hang up the extension phone only after you have
confirmed that fax reception has begun.
unit, when you hear a fax tone, press the one-digit Fax Remote Number and . To
ensure proper fax reception, hang up the extension phone only after you have
confirmed that fax reception has begun.
Turning on Remote Reception:
Factory setting: 1 (ON)
Step
Press these keys
Comments
1
“OPTION SETTING” will appear in
the display.
the display.
2
“REMOTE RECEPTION” will appear
in the display.
in the display.
3
Press 1 to turn Remote Reception on,
or 2 to turn it off.
or 2 to turn it off.
4
Press the STOP key twice to exit.
Fax Setup
02_INITAL.p65
3/22/00, 2:39 PM
16
INITIAL SETTINGS
2-17
FUNCTION
GHI
to
WXYZ
ENTER
STOP
STOP
Setting a Fax Remote Number:
Factory setting: 5
Step
Press these keys
Comments
1
“OPTION SETTING” will appear in
the display.
the display.
2
“FAX REMOTE NUMBER” will appear
in the display.
in the display.
3
Enter the number you would like to
use as the Fax Remote Number.
use as the Fax Remote Number.
4
“STORED” will appear in the display.
5
Press the STOP key twice to exit.
Fax Setup
02_INITAL.p65
3/22/00, 2:39 PM
17
INITIAL SETTINGS
2-18
Distinctive Ringing is a service provided by many telephone companies that allow the
user to use up to two different telephone numbers, each with a distinctive ringing
pattern, on a single telephone line. In Australia this feature is typically referred to as
“Fax Duet”.
If you subscribe to a distinctive ring service from your telephone company, you will
need to turn on the distinctive ring function. When this is done, your fax machine will
signal voice calls by the normal ring pattern, and fax transmissions by a special ring
pattern. In the case of a fax transmission, your fax machine will automatically answer
the call and receive the fax.
user to use up to two different telephone numbers, each with a distinctive ringing
pattern, on a single telephone line. In Australia this feature is typically referred to as
“Fax Duet”.
If you subscribe to a distinctive ring service from your telephone company, you will
need to turn on the distinctive ring function. When this is done, your fax machine will
signal voice calls by the normal ring pattern, and fax transmissions by a special ring
pattern. In the case of a fax transmission, your fax machine will automatically answer
the call and receive the fax.
Distinctive ring is for the reception of FAX Messages. In this case, your fax will answer
and begin receiving a fax transmission after the number of rings set with Option Setting
4 (Setting the Number of Rings for Auto Reception).
and begin receiving a fax transmission after the number of rings set with Option Setting
4 (Setting the Number of Rings for Auto Reception).
Distinctive ring pattern: Three rings
Important:
•
•
The distinctive ring function can only be used if you subscribe to a distinctive ring
service from your telephone company. Do not turn on distinctive ring if you are on a
normal line, as the fax machine will not operate properly.
service from your telephone company. Do not turn on distinctive ring if you are on a
normal line, as the fax machine will not operate properly.
Note: In some areas a distinctive ring pattern can be provided by the telephone
companies for modems. The fax cannot use the distinctive ring pattern that is in
use for the modem.
use for the modem.
Use the procedure below to turn the Distinctive Ringing function on or off:
Factory setting: 2 (OFF)
Step
Press these keys
Comments
1
“OPTION SETTING” will appear in
the display.
the display.
2
“DISTINCTIVE RING” will appear in
the display.
the display.
3
Press 1 to turn Distinctive Ringing on,
or 2 to turn it off.
or 2 to turn it off.
4
Press the STOP key twice to exit.
Distinctive Ringing
FUNCTION
GHI
STOP
STOP
ABC
Fax Setup
ABC
or
02_INITAL.p65
3/22/00, 2:39 PM
18
Click on the first or last page to see other AR-F151 (serv.man16) service manuals if exist.