Sharp AR-F151 (serv.man16) User Manual / Operation Manual ▷ View online
INITIAL SETTINGS
2-11
Setting the Tray Paper Size
FUNCTION
GHI
STOP
STOP
You must program the size of paper you have loaded in the unit so that Receive
Reduce functions can properly adjust the size of documents printed out. Follow the
steps below.
Reduce functions can properly adjust the size of documents printed out. Follow the
steps below.
Note: If you are using A4-size paper, you do not need to make any changes, as this is
the factory setting.
Factory setting: 3 (A4)
Step
Press these keys
Comments
1
“OPTION SETTING” will appear in
the display.
the display.
2
Press 02 and “MAIN CASSETTE” will
appear in the display.
appear in the display.
3
Press 1 for letter, 2 for legal, 3 for A4
size paper or 4 for other sizes.
“STORED” and then “SECOND
CASSETTE” will appear in the display.
size paper or 4 for other sizes.
“STORED” and then “SECOND
CASSETTE” will appear in the display.
4
Press 1 for letter, 2 for legal, 3 for A4
size paper or 4 for other sizes.
“STORED” will appear in the display.
size paper or 4 for other sizes.
“STORED” will appear in the display.
5
Press the STOP key twice to exit.
Notes:
When the unit runs out of paper while receiving a fax:
•
When the unit runs out of paper while receiving a fax:
•
If paper of the same size is available in another paper tray, the unit automatically
switches to the other tray and prints the fax.
switches to the other tray and prints the fax.
•
Select “4: OTHER” for the tray that you do not want to use for fax printing.
•
If same size paper is not available in the other tray, the error message “PAPER OUT
(XX)” appears on the display. The received fax is saved in memory and printed when
you add paper of the proper size.
(XX)” appears on the display. The received fax is saved in memory and printed when
you add paper of the proper size.
Fax Setup
ABC
or
ABC
or
DEF
or
GHI
or
ABC
or
DEF
or
GHI
02_INITAL.p65
3/22/00, 2:39 PM
11
INITIAL SETTINGS
2-12
You can select the number of times the unit will try to recall a busy number. If you
enter 0, the unit will not try to recall. Follow this procedure:
enter 0, the unit will not try to recall. Follow this procedure:
Factory setting: 2
Step
Press these keys
Comments
1
“OPTION SETTING” will appear in
the display.
the display.
2
“RECALL TIMES” will appear in the
display.
display.
3
Enter the number of recall times (“0”
to “9”).
to “9”).
4
“STORED” will appear in the display.
5
Press the STOP key twice to exit.
Setting the Number of Recall Times
FUNCTION
GHI
TUV
ENTER
STOP
STOP
to
WXYZ
The unit can be used with both touch-tone and pulse telephone lines. Touch-tone uses
tones of different pitches for each number key, while pulse lines use a series of pulses.
Your unit must be set to match the kind of telephone line you are using: touch-tone or
pulse.
tones of different pitches for each number key, while pulse lines use a series of pulses.
Your unit must be set to match the kind of telephone line you are using: touch-tone or
pulse.
Factory setting: 1 (TOUCH-TONE)
Step
Press these keys
Comments
1
“OPTION SETTING” will appear in
the display.
the display.
2
“DIAL MODE” will appear in the
display.
display.
3
Press 1 for touch-tone, or 2 for pulse.
“STORED” will appear in the display.
“STORED” will appear in the display.
4
Press the STOP key twice to exit.
Setting the Dial Mode
FUNCTION
GHI
WXYZ
or
ABC
STOP
STOP
Fax Setup
02_INITAL.p65
3/22/00, 2:39 PM
12
INITIAL SETTINGS
2-13
Fax Setup
Setting the Recall Interval
FUNCTION
GHI
WXYZ
ENTER
STOP
STOP
The recall interval, the time the unit waits in between attempts to re-send a fax to
a busy number, can be set from 1 to 15 minutes. Follow this procedure:
a busy number, can be set from 1 to 15 minutes. Follow this procedure:
Factory setting: 05 (5 minutes)
Step
Press these keys
Comments
1
“OPTION SETTING” will appear in
the display.
the display.
2
“RECALL INTERVAL” will appear in
the display.
the display.
3
Enter the recall interval (“01” to “15”).
4
“STORED” will appear in the display.
5
Press the STOP key twice to exit.
to
JKL
02_INITAL.p65
3/22/00, 2:39 PM
13
INITIAL SETTINGS
2-14
Fax Setup
You can print an index mark along the edge of the pages in each job. This makes it
easy to separate different jobs on the output tray.
easy to separate different jobs on the output tray.
Setting the Index Function
ABC
or
ABC
ABC
STOP
STOP
Use the following procedure to set the index function.
Factory setting: 1 (ON)
Step
Press these keys
Comments
1
“OPTION SETTING” will appear in
the display.
the display.
2
“BATCH INDEXING” will appear in the
display.
display.
3
Press 1 to turn on the index function,
or 2 to turn it off.
or 2 to turn it off.
4
Press the STOP key twice to exit.
FUNCTION
GHI
Separate faxes
with index marks.
02_INITAL.p65
3/22/00, 2:39 PM
14
Click on the first or last page to see other AR-F151 (serv.man16) service manuals if exist.