Sharp AR-F151 (serv.man16) User Manual / Operation Manual ▷ View online
INITIAL SETTINGS
2-3
Adjust the ringing volume of the unit using the procedure below.
Factory setting: 3 (MEDIUM)
Step
Press these keys
Comments
1
“OPTION SETTING” will appear in
the display.
the display.
2
“RINGING VOLUME” will appear in
the display.
the display.
3
Press the or key to lower or raise
the volume to the desired level.
the volume to the desired level.
4
“STORED” will appear in the display.
5
Press the STOP key twice to exit.
Adjusting the Ringing Volume
FUNCTION
GHI
TUV
or
ENTER
STOP
STOP
You can select the length in seconds of the alarm beeps following the procedure
below.
below.
Factory setting: 1 (3SEC)
Step
Press these keys
Comments
1
“OPTION SETTING” will appear in
the display.
the display.
2
“BEEP LENGTH” will appear in the
display.
display.
3
Press the or key to set the alarm
beeps to the desired length or to turn
them off.
beeps to the desired length or to turn
them off.
4
“STORED” will appear in the display.
5
Press the STOP key twice to exit.
Setting the Length of Alarm Beeps
FUNCTION
GHI
JKL
or
ENTER
STOP
STOP
02_INITAL.p65
3/22/00, 2:39 PM
3
INITIAL SETTINGS
2-4
If you prefer, you can choose to turn the key beeps off. To do this, follow the
procedure below:
procedure below:
Factory setting: 1 (ON)
Step
Press these keys
Comments
1
“OPTION SETTING” will appear in
the display.
the display.
2
“KEY BEEPS” will appear in the
display.
display.
3
Press 1 to turn the key beeps on, or 2
to turn them off.
to turn them off.
4
Press the STOP key twice to exit.
Turning Key Beeps Off
FUNCTION
GHI
PQRS
or
ABC
STOP
STOP
02_INITAL.p65
3/22/00, 2:39 PM
4
INITIAL SETTINGS
2-5
Fax Setup
You can enter letters with the number keys. Letters are marked above each of the
number keys “2” through “9”. To enter a letter, press the appropriate key repeatedly until
the desired letter appears (the number of the key appears first, followed by letters in the
order marked above the key). The keys used for entering characters are shown below.
number keys “2” through “9”. To enter a letter, press the appropriate key repeatedly until
the desired letter appears (the number of the key appears first, followed by letters in the
order marked above the key). The keys used for entering characters are shown below.
• To enter two characters in succession which require using the same key, press the
right arrow ( ) key once after entering the first character, and then enter the second
character.
character.
• To change one individual character to another, move the cursor to the character you
want to change and enter the new one. The new character will replace the old one.
• Symbols can also be entered by pressing the “#” and “ ” keys:
• Pressing the “1” key on the number keypad enters a space.
How to Enter Characters
GHI
PQRS
ABC
JKL
TUV
DEF
MNO
WXYZ
02_INITAL.p65
3/22/00, 2:39 PM
5
INITIAL SETTINGS
2-6
Note: You can view all of the items in the menu display by pressing the FUNCTION
key, then using the left and right arrow ( ) keys to scroll through the function
list. Pressing the ENTER key chooses the displayed function. Procedures for
inputting various items (name, telephone number, date, etc.) are given as
follows.
list. Pressing the ENTER key chooses the displayed function. Procedures for
inputting various items (name, telephone number, date, etc.) are given as
follows.
To have your name and fax number printed at the top of every page you transmit,
program them by pressing the operation panel keys as shown below.
program them by pressing the operation panel keys as shown below.
• If you enter an incorrect character, press the left arrow ( ) key to move the cursor
back to the mistake, then enter the correct character. (To move the cursor forward,
press the right arrow ( ) key.)
press the right arrow ( ) key.)
Use the following procedure to enter your name and fax number:
Step
Press these keys
Comments
1
“ENTRY MODE” will appear in the
display.
display.
2
“ENTER YOUR FAX #” will appear in
the display.
the display.
3
Enter your own fax number (maximum
20 digits) by pressing the number keys.
To insert a space between digits, press
the “ ” key. To insert a “+”, press the “#”
key.
20 digits) by pressing the number keys.
To insert a space between digits, press
the “ ” key. To insert a “+”, press the “#”
key.
(example: 18002374277)
4
“ENTER YOUR NAME” will appear in
the display.
the display.
5
Enter your name by pressing the
appropriate number keys as shown
on the left. Press each key repeatedly
until the desired letter appears in the
display (maximum of 24 characters).
To enter a space, press the 1 key
twice. To switch between lower case
and capital letters, press the REDIAL/
PAUSE key once.
appropriate number keys as shown
on the left. Press each key repeatedly
until the desired letter appears in the
display (maximum of 24 characters).
To enter a space, press the 1 key
twice. To switch between lower case
and capital letters, press the REDIAL/
PAUSE key once.
(example: SHARP)
6
“STORED” will appear in the display.
7
Press the STOP key twice to exit.
Entering Your Name and Fax Number
FUNCTION
DEF
TUV
ABC
DEF
PQRS
ENTER
PQRS
PQRS
PQRS
PQRS
PQRS
GHI
ABC
PQRS
PQRS
PQRS
PQRS
GHI
GHI
ABC
PQRS
PQRS
STOP
STOP
ENTER
DEF
GHI
ABC
PQRS
PQRS
Fax Setup
02_INITAL.p65
3/22/00, 2:39 PM
6
Click on the first or last page to see other AR-F151 (serv.man16) service manuals if exist.