Sharp AR-C200P (serv.man12) User Manual / Operation Manual ▷ View online
Novell Netware IPX 24
Network Configuration 25
NETWORK CONFIGURATION
Introduction
Your printer incorporates a fast 100BASE-TX/10BASE-T network
interface. This user’s guide explains the functionality of the built in
network interface. Access for interconnection and producing self-
diagnostic test and configuration printouts is provided via an
interface panel at the rear of the printer.
interface. This user’s guide explains the functionality of the built in
network interface. Access for interconnection and producing self-
diagnostic test and configuration printouts is provided via an
interface panel at the rear of the printer.
This network interface supports IEEE802.2, IEEE802.3, Ethernet-II and
SNAP and can detect those frame types automatically.
SNAP and can detect those frame types automatically.
Also, the interface supports major protocols such as TCP/IP, IPX/SPX
(NetWare), EtherTalk and NetBEUI.
(NetWare), EtherTalk and NetBEUI.
This section details the network interface specification and several
software utilities.
software utilities.
You should set the emulation in the Printer Menu settings to Auto or
PS before printing the self-diagnostic test and settings.
PS before printing the self-diagnostic test and settings.
Network Configuration 26
Specification
Frame types
IEEE 802.2
IEEE 802.3
Ethernet-II, SNAP, AUTO
Network interface
100BASE-TX
10BASE-T
Network protocols
TCP/IP
Network layer
ARP, RARP, IP, ICMP
Session layer
TCP, UDP
Application layer
LPR, FTP, TELNET, HTTP, IPP, BOOTP,
DHCP, SNMP, DNS, SMTP, POP3,
SLP, Rendezvous
DHCP, SNMP, DNS, SMTP, POP3,
SLP, Rendezvous
IPX/SPX (NetWare)
Remote printer mode (up to eight file servers and 32
queues)
queues)
Print server mode over IPX/SPX (up to eight print servers)
Encrypted password supported in print server mode
SNMP
EtherTalk
ELAP, AARP, DDP, AEP, NBP, ZIP, RTMP, ATP, PAP
NetBEUI
SMB, NetBIOS, WINS
Functions
Self-diagnostic test printing
Banner supported
Monitoring/configure by Web browser
Printer status notification by E-Mail
Network Configuration 27
Self-diagnostic test
With the printer power switched on, press the push-button located on
the network interface panel (at the rear of the printer) for more than
three seconds and release. The self-diagnostic test results and
configuration settings are printed.
the network interface panel (at the rear of the printer) for more than
three seconds and release. The self-diagnostic test results and
configuration settings are printed.
On the first page of the Network Information that is printed out, under
the heading General Information the MAC Address is given. For
example:
the heading General Information the MAC Address is given. For
example:
MAC Address 00808784E3F1
From this information:
the Ethernet address is: 00:80:87:84:E3:F1
Click on the first or last page to see other AR-C200P (serv.man12) service manuals if exist.