DOWNLOAD Sharp AR-C200P (serv.man12) Service Manual ↓ Size: 3.04 MB | Pages: 96 in PDF or view online for FREE

Network Configuration 28

Available utilities

You can configure the network interface (NIC) by using one of the
following methods:

Quick Setup

Configure the NIC easily and simply 
without installing any software 
packages into your system. You can 
set the following:
Enable/disable TCP/IP, NetWare, 
EtherTalk, NetBEUI protocols.

>

Set IP address, Subnet Mask 
and Gateway for TCP/IP 
manually or by using DHCP.

>

Set NetWare Mode and create 
Queue/Print Server/Printer 
objects.

>

Zone name and Port name for 
EtherTalk.

Windows95/98/Me/NT4.0/2000/
XP (TCP/IP protocol or IPX/SPX 
protocol should be installed).

To create a NetWare queue, 
NetWare Client 32 or IntranetWare 
Client should be installed in your 
system.

AdminManager Configure the NIC in detail.

Windows95/98/Me/NT4.0/2000/
XP (TCP/IP protocol or IPX/SPX 
protocol should be installed).

To create a NetWare queue, 
NetWare Client 32 or IntranetWare 
Client should be installed in your 
system.

Web browser

Configure the NIC and printer by 
using a Web browser such as 
Microsoft Internet browser or 
Netscape Navigator.

Microsoft Internet Explorer Version 
3.0 and higher or Netscape 
Navigator Version 3.0 and higher.

Operating system that supports 
Web browser.

TELNET

Configure the NIC using TELNET.

Third-party vendor developed 
TELNET client package. 
A TELNET Application is standard in 
Windows/UNIX/Linux.

SNMP

The printer and network card can be 
controlled using third-party vendor 
developed SNMP application.

Third-party vendor developed 
SNMP application.

Network Configuration 29

Quick Setup utility allows you to configure the network interface
easily and simply without installing any software packages.

 You can configure the following:

>

Enable/disable TCP/IP, NetWare, EtherTalk, NetBEUI protocols.

>

Set IP address, Subnet Mask and Gateway for TCP/IP manually
or by using DHCP.

>

Set NetWare mode and create Queue/Print Server/Printer
objects.

>

Zone name and Port name for EtherTalk.

Configuration requires a PC with Windows 95/98/Me, Windows 2000
Advanced Server/Professional or Windows NT Server 4.0/Work-
station 4.0, Windows XP running TCP/IP or IPX/SPX (NetWare).

This utility can only be used on a PC that can be connected to the
network with TCP/IP or IPX/ SPX.

This utility must be used on a PC that is located in the same segment
as the printer. To create a NetWare queue, NetWare Client 32 or
IntranetWare Client should be installed in your system.

Network Configuration 30

The following explanation uses Windows 98 as an example. 

1.

Insert the “Drivers” CD into the CD-ROM drive. The Setup Utility
should start automatically. If it does not start, double-click
\setup.exe (in the root directory) on the CD-ROM.

2.

Select [Driver Installation] 

3.

Select [Network Card Quick Setup].

4.

Select the appropriate language.

5.

Follow the on-screen instructions.

>

The NetWare Client 32 or IntranetWare Client should be installed
on the PC used for the creation of network queues. Installation
enables the user to create network queues and perform other
functions.

6.

If the settings are correct, click [Execute]. The new settings are
transmitted to the network card but the network card is still
operating with pre-transmission settings.

7.

Click [Finish] to validate the new settings. Depending on the
model, the printer may have to be switched off and on again.

AdminManager is a powerful Microsoft Windows-based utility to
configure all network interface functions easily and intuitively by
using a graphical user interface. 

Configuration requires a PC with Windows 95/98/Me, Windows 2000
Advanced Server/Professional or Windows NT Server 4.0/Work-
station 4.0, Windows XP running TCP/IP or IPX/SPX (NetWare).

This utility can only be used on a PC that can be connected to the
network  with  TCP/IP  or  IPX/  SPX  and  must  be  used  on  a  PC  that  is
located in the same segment as the printer.

Network Configuration 31

To create a NetWare queue, NetWare Client 32 or IntranetWare Client
should be installed on to your system.

The following explanation uses Windows 98 as an example.

1.

Insert  the  “Driver”  CD-ROM  into  the  CD-ROM  drive.  The  Setup
Utility starts automatically. If it does not start, double-click
\

setup.exe (in the root directory) on the CD-ROM. 

2.

Select [Driver Installation].

3.

Select [Network Card Standard Setup].

4.

Select the appropriate language.

5.

Follow the on-screen instructions. If you want to install
AdminManager on to your local drive, select [Install and
Execute]. Otherwise, select [Execute from CD-ROM].

6.

To run AdminManager, check [Yes] for [Do you wish to execute
AdminManager?] and click [Finish]. Otherwise, uncheck [No] and
click [Finish]].