DOWNLOAD Sharp AR-C200P (serv.man12) Service Manual ↓ Size: 3.04 MB | Pages: 96 in PDF or view online for FREE

Network Configuration 36

Print Server Name

Set Print Server name. 

Frame Type

Set primary NetWare frame type. 

Operation Mode

Set NetWare mode. 

Check box besides Bindery 
Setup

Check if you want to use the Bindery mode and Bindery 
Setup button becomes available. If it is unchecked, the 
button is greyed out. 

Bindery Setup

Configure items related to Bindery mode.

In this dialogue box, the following items can be configured. 

Available File Server and 
Selected File Server.

Select file servers to 
connect. Up to eight file- 
servers can be selected. 
Select a server from 
Available file server list and 
click >> button. The server is 
copied to Selected file 
server box. 

Password.

Set password for Print 
Server.

Job Polling Time.

Set print job polling interval 
in seconds.

Set NDS tree and context where Print Server was created.

NDS Setup

Network Configuration 37

RPRINTER Setup

Available if you select RPRINTER mode in Operation Mode. 

By selecting the [RPRINTER] button, this is displayed:

NDS or Bindery

Show the Available print 
server tree in NDS mode or 
Bindery mode.

Available print server and 
Selected print server

Select file servers to 
connect. Up to eight 
fileservers can be selected. 
Select a server from 
Available file server list and 
click >> button. The server is 
copied to Selected file 
server box. 

Time Out

Set duration from the last 
data’s arrival to freeing of 
the port in seconds. 

Printer Name

Set the NetWare printer object name.

Network Configuration 38

This allows you to configure EtherTalk related items

This allows you to configure NetBEUI related items.

Use EtherTalk Protocol Set EtherTalk protocol to enabled/disabled.

Printer Name

Set EtherTalk Printer object name.

Zone Name

Set the zone name to which the printer belongs. 

Use NetBEUI Protocol

Set NetBEUI protocol to enabled/disabled.

Computer Name

Set a computer name for the printer. 

Workgroup

Set a work group name to which the printer belongs.

Comment

Set the comments for the printer.

WINS Server ...

Configure items related to the WINS Server.

In this dialogue box, the following items can be configured:

Primary Server 

Set WINS Primary server.

Secondary Server Set WINS Secondary server.

Scope ID

Set a Scope ID.

Network Configuration 39

This allows you to configure SNMP related items.

Authentic 
Community

This community name is used to check whether incoming SNMP 
requests have the correct community name or not. The community 
name is displayed as ****** for security reasons. 

TRAP Community This community name is assigned to outgoing system traps such as 

cold start, authentication failure, etc. 

TRAP Address

Set a destination IP address of a Trap packet. If 0.0.0.0 is set, the Trap 
is disabled. 

SysContact

Set SysContact (printer manager) name.

SysName

Set SysName (printer model name). 

SysLocation

Set SysLocation (the location where the printer is installed).

Default TTL

Set TTL (Time To Live) value.

Enable Authentic 
Trap

Set Authentic Trap to enabled/disabled.