DOWNLOAD Sharp AR-C200P (serv.man12) Service Manual ↓ Size: 3.04 MB | Pages: 96 in PDF or view online for FREE

Network Configuration 32

Select [Start]-[Programs]-[Setup Utility]-[Admin Manager].

File menu

In the [File] menu, the following item can be selected:

Status Menu

In the [Status] menu, the following items can be selected:

Search

Search printers in your network and list all printers that have 
the FastEther card installed.

Printer Status

Current printer status is displayed: 

System Status

Displays current NIC configuration. Configuration data can 
be saved as log file.

NetMeter

Display current network status. For further information, see 
on-line help file of NetMeter. 

Network Configuration 33

Setup Menu

In this menu, the following items can be selected: 

List of Configuration Items

Displays current NIC configuration. Configuration data can 
be saved as log file.

Device Setup

Configure the network interface (NIC).

Setup by HTTP

Launch the default browser in your environment to access the 
selected printer’s web page.

Setup by TELNET

Launch TELNET application in your environment to access the 
selected printer’s TELNET port. 

Note: The TELNET application is not included as part of the NIC 
package. Install the TELNET package on to your system. For 
further information, see your Windows manual.

Create NetWare Queue Create a NetWare queue. 

Delete NetWare Object Delete NetWare object. 

Reset

Reset the selected network interface card. 

Test Print

Print self-diagnostic test pages.

IP Address Setup

Set static IP address of network interface card manually. 

Network Configuration 34

Device Setup

Device Setup allows you to configure the network interface. Type the
root password (default value is the last 6 characters of the MAC
address) to configure. Remember that the root password is case
sensitive and if the MAC address contains any alpha characters, type
them as upper case. Device Setup contains details for the following
selectable tabs:

>

General

>

SNMP

>

TCP/IP

>

POP

>

NetWare

>

SMTP

>

NetBEUI

>

Maintenance

>

EtherTalk

The following section explains each tab’s functionality. Depending on
your printer, some items in the following explanation may not be
displayed.

This allows you to set or change the root password used for Admin
Manager, TELNET and FTP.

Change root password You can set/change the root password for AdminManager, 

TELNET and FTP.

Network Configuration 35

This allows you to configure TCP/IP related items. 

This is where you can configure NetWare related items.

Use TCP/IP 
Protocol

Set TCP/IP protocol as enabled/disabled. 

Use DHCP/
BOOTP

Check this item if IP address, subnet mask, default gateway and IP 
addresses for DNS primary server and secondary servers are retrieved 
from the DHCP or BOOTP server. Otherwise, uncheck. 

Use RARP

Check this item if IP address is retrieved from the RARP server. 
Otherwise, uncheck. 

IP Address

Set the IP address of the selected network interface card.

Subnet Mask

Set the subnet mask of the selected network interface card. 

Default Gateway Set the default gateway of the selected network interface card. 

Use FTP/LPD 
Banner

Check this item if you want to add the FTP/LPD banner. Otherwise, 
uncheck. 

DNS Server . . .

Set IP addresses for DNS primary and secondary servers. 

Network PnP 
Setup ...

Configure items related to Network PnP.

In this dialogue box, the following items can be configured> 

Auto IP address

Set to get IP address 
dynamically by Auto IP, 
enabled or disabled

Use Network PnP

Set notifying users with 
using UPnP supported OS 
of the printer, enabled or 
disabled

Device Name

Set the device name for 
Network PnP

Use NetWare Protocol

Set NetWare protocol as enabled/disabled. 

Use IPX Protocol / Use TCP/IP 
Protocol

Set protocol to use.