Sharp AM-300 (serv.man11) User Manual / Operation Manual ▷ View online
Installing the Toner Cartridge and Drum Cartridge
22
2
Remove the new drum cartridge from its packaging.
3
Insert the drum cartridge into the print
compartment, sliding it along the
guides.
compartment, sliding it along the
guides.
•
Do not touch or allow other objects to
contact the drum (the green cylinder).
This may damage the drum. If
fingerprints, dust, or other
contaminants get on the drum, wipe it
gently with a clean cloth.
contact the drum (the green cylinder).
This may damage the drum. If
fingerprints, dust, or other
contaminants get on the drum, wipe it
gently with a clean cloth.
•
Exposure to light for more than several
minutes will damage the drum. Be sure
to insert the drum cartridge promptly
into the machine.
minutes will damage the drum. Be sure
to insert the drum cartridge promptly
into the machine.
•
If you find it necessary to leave the
cartridge out of the machine for more
than several minutes, wrap the
cartridge in black paper.
cartridge out of the machine for more
than several minutes, wrap the
cartridge in black paper.
4
Remove the new toner cartridge from
its packaging. Shake the cartridge side
to side four or five times to distribute
the toner evenly within the cartridge.
to side four or five times to distribute
the toner evenly within the cartridge.
Grasp this handle to
push the cartridge in
push the cartridge in
Installing the Toner Cartridge and Drum Cartridge
23
1. Installation
5
Grasp the cartridge handle and insert
the toner cartridge into the print
compartment, sliding it along the
guides.
the toner cartridge into the print
compartment, sliding it along the
guides.
•
After inserting the cartridge, press on
the arrow mark to make sure it “clicks”
into place.
the arrow mark to make sure it “clicks”
into place.
•
Do not touch the roller in the toner
cartridge.
cartridge.
6
Close the front cover
➊
and then the side cover
➋
.
•
Make sure the side cover is completely closed. Otherwise, light may enter
the print compartment and damage the drum.
the print compartment and damage the drum.
2
1
1:YES, 2:NO
TONER EXCHANGED?
Display:
Press on this mark to
make sure the cartridge
“clicks” into place
make sure the cartridge
“clicks” into place
Grasp this handle to
insert the cartridge
insert the cartridge
Installing the Toner Cartridge and Drum Cartridge
24
Resetting the drum counter
Each time you install a new drum cartridge, follow the steps below to reset the
drum counter to zero.
drum counter to zero.
1
Press
and then
or
repeatedly until the display at right
appears.
appears.
2
Press .
3
Press .
4
Press
repeatedly to exit.
MENU
Z
A
Display:
LIFE
7
If you installed a new toner cartridge,
press
to select YES (this will
reset the toner counter to zero).
•
If you temporarily removed and then replaced an old toner cartridge for
maintenance or other reason, press
to continue using the previous
toner count. (Note: Be sure to press
or the machine will not alert you
when the toner cartridge is out of toner.)
8
Press .
9
If you installed a new drum cartridge, reset the drum counter as
explained below.
CLEAR: START KEY
DRUM COUNTER
NEW TONER?
OK: PRESS START
1: LIFE COUNTER
Installing the Toner Cartridge and Drum Cartridge
25
1. Installation
Manually resetting the toner counter
When a new toner cartridge is installed, the toner counter is reset in Step 7 on
the previous page. The procedure below is normally not necessary; however,
it can be used in the event that you need to reset the toner counter manually.
the previous page. The procedure below is normally not necessary; however,
it can be used in the event that you need to reset the toner counter manually.
1
Press
and then
or
repeatedly until the display at right
appears.
appears.
2
Press .
3
Press .
4
Press
repeatedly to exit.
MENU
Z
A
Display:
CLEAR: START KEY
LIFE
TONER COUNTER
3: CLR DRUM COUNT
Click on the first or last page to see other AM-300 (serv.man11) service manuals if exist.