Sharp AM-300 (serv.man11) User Manual / Operation Manual ▷ View online
Installation
14
Installation
Attaching the trays
Attach the document feeder tray.
Slide the output tray into the machine as shown. When it stops, lift the end
slightly and push in so that the tray locks in place.
slightly and push in so that the tray locks in place.
Important:
The output tray must be attached correctly or the machine will not operate.
The output tray must be attached correctly or the machine will not operate.
Installation
15
1. Installation
Releasing the scanner
Before plugging in the power cord, pull the scanner release toward you to
release the scanner lock.
release the scanner lock.
♦
Caution: Plugging in the power cord without releasing the scanner lock
may damage the machine.
may damage the machine.
If you need to move the machine (AM-400):
♦
In the event that you need to move the machine to a new location,
disconnect the telephone line cord before unplugging the power cord. After
you have unplugged the power cord, push the scanner release back in to
lock the scanner.
disconnect the telephone line cord before unplugging the power cord. After
you have unplugged the power cord, push the scanner release back in to
lock the scanner.
♦
After moving, release the scanner lock first and then plug in the power cord.
Connect the telephone line last.
Connect the telephone line last.
If you need to move the machine (AM-300):
♦
After you have unplugged the power cord, push the scanner release back in
to lock the scanner.
to lock the scanner.
♦
After moving, release the scanner lock first and then plug in the power cord.
Installation
16
Connecting the power cord
Plug the power cord into a 220 - 230 V, 50 Hz, earthed AC outlet (U.K., Eire:
230 V, 50 Hz, earthed (3-prong) outlet; Russia: 220-240 V, 50/60 Hz, earthed
outlet).
230 V, 50 Hz, earthed (3-prong) outlet; Russia: 220-240 V, 50/60 Hz, earthed
outlet).
♦
Caution: Make sure the scanner has been released as explained on the
previous page before plugging in the power cord.
previous page before plugging in the power cord.
♦
The power outlet must be installed near the equipment and must be easily
accessible.
accessible.
Note: The shape of the power plug varies by country.
Comments:
♦
The machine does not have a power on/off switch. The power is turned on
and off by simply plugging in or unplugging the power cord.
and off by simply plugging in or unplugging the power cord.
♦
Whenever you unplug the power cord, wait at least 5 seconds before
plugging it back in.
plugging it back in.
♦
If your area experiences a high incidence of lightning or power surges, it is
recommended that you install surge protectors for the power and telephone
lines. Surge protectors can be purchased from your dealer or at most
telephone specialty stores.
recommended that you install surge protectors for the power and telephone
lines. Surge protectors can be purchased from your dealer or at most
telephone specialty stores.
Installation
17
1. Installation
Connecting the telephone line cord (AM-400 only)
Insert one end of the line cord into the socket on the back of the machine
marked TEL. LINE. Insert the other end into a wall telephone socket.
marked TEL. LINE. Insert the other end into a wall telephone socket.
Note: The shape of the line cord plug varies by country.
TEL.
LINE
TEL.
SET
Make sure that the line cord is
inserted into the TEL LINE socket.
Do not insert it into the TEL. SET
socket!
inserted into the TEL LINE socket.
Do not insert it into the TEL. SET
socket!
Germany:
The machine is supplied with a N-
coded line cable, enabling you to use
an extension (cordless) telephone on
the same line. If you don't have the
standard NFN-outlet of TELEKOM, you
can purchase an NFN-adapter at your
retailer.
The machine is supplied with a N-
coded line cable, enabling you to use
an extension (cordless) telephone on
the same line. If you don't have the
standard NFN-outlet of TELEKOM, you
can purchase an NFN-adapter at your
retailer.
Italy:
Use the provided adapter to connect the
line cord to the wall socket.
Use the provided adapter to connect the
line cord to the wall socket.
Click on the first or last page to see other AM-300 (serv.man11) service manuals if exist.