Panasonic TH-86SQ1W (serv.man2) Service Manual ▷ View online
DIS-11
SECTION 2 DISASSEMBLY PROCEDURES
<86SQ1>
2.8. LCD panel module removal
[HANDLE removal]
1. Remove 2 screw S5 and remove the HANDLE (Ref.No.16). (Eight places)
[REAR COVER removal]
1. Remove 8 screw S8 and 3 screw S9, and then remove the REAR_COVER_R (Ref.No.11).
2. Remove 8 screw S8 and 4 screw S9, and then remove the REAR_COVER_L (Ref.No.10).
: Screw S5 (16pcs)
: Screw S8 (16pcs) : Screw S9 (7pcs)
16
16
16
16
11
10
DIS-12
SECTION 2 DISASSEMBLY PROCEDURES
<86SQ1>
[Cable removal]
1. Disconnect 2 connectors on the LED drive module.
Note: Pay attention not to tear off the cable from the connector.
2. Disconnect 2 connectors on the T-CON module.
Note: Pay attention not to tear off the cable from the connector.
: Screw S4 (8pcs) : Screw S3 (12pcs)
S14
6
8
7
[BKT CHASSIS and BKT POWER removal]
1. Remove 4 screw S4 and 6 screw S3, and then remove the BKT_CHASSIS_L (Ref.No.7).
2. Remove 4 screw S4 and 4 screw S3, and then remove the BKT_CHASSIS_R (Ref.No.8).
3. Remove 2 screw S14 and 2 screw S3, and then remove the BKT_CHASSIS_BTM (Ref.No.6).
DIS-13
SECTION 2 DISASSEMBLY PROCEDURES
<86SQ1>
[BEZEL removal]
1. Remove 4 screw S3 and remove the BEZEL_L (Ref.No.3).
2. Remove 4 screw S3 and remove the BEZEL_R (Ref.No.4).
3. Remove 7 screw S3 and remove the BEZEL_BTM (Ref.No.2).
4. Remove 11 screw S3 and remove the BEZEL_TOP (Ref.No.1) and the BKT HOLDER (Ref.No.5).
2
1
4
3
: Screw S3 (26psc)
5
: Screw S3 (5psc)
1
5
[In case of BKT HOLDER removing]
1. Remove 5 screw S3, and then remove the BKT_HOLDER (Ref.No.5) from the BZEL_TOP (Ref.No.1).
DIS-14
SECTION 2 DISASSEMBLY PROCEDURES
<86SQ1>
2.9. KEY module and IR module removal
[KEY module removal]
1. Remove a screw S7 and then remove the KEY_FUNCTION (Ref.No.17) and the SHEET (Ref.No.25).
2. Disconnect the connector on the KEY module (Ref.No.34).
Note: Pay attention not to tear off the cable from the connector.
3. Remove the KEY module from the KEY_FUNCTION.
[IR module removal]
1. Remove 2 screw S6 and remove the BKT_IR (Ref.No.20).
2. Remove the LENS (Ref.No.18) and IR module (Ref.No.35).
3. Disconnect the connector on the IR module.
Note: Pay attention not to tear off the cable from the connector.
S7
25
17
34
S6
34
20
18
35
10
Click on the first or last page to see other TH-86SQ1W (serv.man2) service manuals if exist.