Panasonic VDR-M30PP / VDR-M30EG / VDR-M30B / VDR-M30EN Service Manual / Supplement ▷ View online
2 ADDITION OF CAUTION FOR RESSEMBLY
(9)
Disc Cover (Figs. 5-3-10, 5-3-11, 5-3-11a)
1) Move the lock arm (b) in the direction of the arrow to open the disc cover (a).
2) Open the card slot cover (c).
3) Disconnect the flat cable (e) from MAN circuit board (d).
4) Remove four screws [D].
5) Remove the disc cover in the direction of the arrow: Be careful not to damage the flat cable (e)
that extends from the disc cover.
Procedure and caution for reassembly
1) Reinstall the disc cover so that the hinge
1
of R case fits into portion
2
at the inside top of disc
cover. (Fig. 5-3-11)
2) When attaching the disc cover to the flange of R case, take care with the switch inside the cover:
If the cover is tilted, the switch may be broken. (Fig. 5-3-11a)
3) Pass the flat cable (e) extending from the disc cover through the gap between frame (g) and R
case (h), and then connect it to the MAN circuit board (d). (Fig. 5-3-11)
Fig. 5-3-10 Disc Cover
(b)
(d)
3
(a)
2
(c)
3-1
3-2
1
(a) Disc Cover
(b) Lock Arm
(c) Card Slot Cover
(d) MAN Circuit Board
(e) Flat Cable
(f) Hinge of R Case
(g) Frame
(h) R Case
(j) Disc Drive Unit
(k) Loader
(b) Lock Arm
(c) Card Slot Cover
(d) MAN Circuit Board
(e) Flat Cable
(f) Hinge of R Case
(g) Frame
(h) R Case
(j) Disc Drive Unit
(k) Loader
[D] M1.6×2.5 (Black)
5.3. Disassembly
Fig. 5-3-11a Disc Cover
(a)
SWITCH
NG
NG
OK
Fig. 5-3-11 Disc Cover
4 [D]
4 [D]
(a)
(c)
5
(f)
(a)
(e)
(d)
(k)
(g)
(h)
(j)
(e)
1
2
(f)
(It added a document.)
(It added the number of the figure.)
(It added an illustration.)
5
VDR-M30PP / VDR-M30EG / VDR-M30B / VDR-M30EN
3 ADDITION OF ADJUSTMENT PROCEDURES
6
VDR-M30PP / VDR-M30EG / VDR-M30B / VDR-M30EN
6.1.1. List of Jigs and Tools used when Creating Reference Data
Personal computer (PC)
All of the following OS must operate normally on it.
*1
OS: Windows 95/98/98 Second Edition/Me/2000 Professional/XP/NT4.0
DSP-R jig
VFK1873
C12 light balancing filter
VFK1164LBB12
Step-up rings (Diameter 30.5 mm)
VFK1164TAR3A
NEW
Skylark connection jig
VFK1872
RS-232C cable (9-pin or 25-pin straight type)
[Generally available]
AV/S input/output or output cable
[Accessory: Parts No. EW12432]
AC adapter/charger
[Accessory]
*2
Power cable for AC adapter/charger
[Accessory]
*2
DC power cord
[Accessory: Parts No. EV11012]
*1: The adjustment program used on DVD video
camera/recorder is exclusively for Windows
95/98/98 Second Edition/Me/2000
Professional/XP/NT4.0: The program cannot
be run on MS-DOS.
*2: The part numbers of AC adapter/charger and
power cable are different depending on the
destination: Refer to the “Replacement Parts
List” for the part numbers.
Example
7
VDR-M30PP / VDR-M30EG / VDR-M30B / VDR-M30EN
6.1.2. Power Supply and Materials for Creating Reference Data
1) DVD video camera/recorder that is the same model as the one to be adjusted and whose camera
block is operating normally.
Note:
It is recommended that you use a brand-new unit of the same model when creating the reference
data. If such a unit is not available, use the same model of the DVD video camera/recorder that is
received from customer for repairing fault in disc drive that is other than in the camera block,
and one where there is no problem in recording of camera image and the zoom is operating
normally.
2) 3100 K light box (VFK1164TDVLB)
3) Color monitor (color TV with AV input jacks)
4) DC power supply for DSP-R jig (5 V/1 A)
5) DC power supply for Light box (12 V/2 A)
6.1.3. Connections when Creating Reference Data
Connect the DVD video camera/recorder (for creating reference data), jigs and test equipment as
shown in Fig. 6-1-1.
Prohibition:
Assemble the DVD video camera/recorder completely, and create reference data with only the
adjustment cover removed (see Fig. 6-1-1).
Do not attempt to create reference data with the DVD video camera/recorder disassembled: Doing so
is very dangerous because the DVD video camera/recorder incorporates high-voltage circuits and a
laser emitter block.
8
VDR-M30PP / VDR-M30EG / VDR-M30B / VDR-M30EN
Click on the first or last page to see other VDR-M30PP / VDR-M30EG / VDR-M30B / VDR-M30EN service manuals if exist.