DOWNLOAD Harman Kardon HS 2X0 Service Manual ↓ Size: 889.84 KB | Pages: 64 in PDF or view online for FREE

 

Page 23 of 62                                Report No. SH10011244-001 

IEC 60065

Clause 

Requirement + Test 

Result - Remark 

Verdict 

TRF No. IEC60065J 
 
 
 

20.1.3 

Material of printed circuit boards on which the 
available power exceeds 15 W at a voltage between 
50 V and 400 V (peak) a.c. or d.c. meets V-1 or 
better to IEC60707, unless used in a fire enclosure  

 

N/A 

 

Material of printed circuit boards on which the 
available power exceeds 15 W at a voltage >400 V 
(peak) a.c. or d.c. meets V-0 to IEC 60707  

The PCB has the flammability 
rating of V-0 
 

Pass 

20.1.4 

Components and parts not covered by 20.1.1, 20.1.2 
and 20.1.3 (other than fire enclosures) mounted 
nearer to a potential ignition source than the 
distances in Table 21 comply with the relevant 
flammability category in Table 21  

See components list 

Pass 

 

Components and parts as above but shielded from a 
potential ignition source, with the barrier area in 
accordance with Table 21 and fig. 13  

 N/A 

 

Apparatus with voltages >4kV under normal 
operating conditions and distances to the enclosure 
exceed those specified Table 21, flammability 
classification HB40 or better is required for the 
enclosure  

 N/A 

20.2 

Fire enclosure  

 

N/A 

20.2.1 

Potential ignition sources with open circuit voltage 
> 4 kV (peak) a.c. or d.c. contained in a fire 
enclosure to V-1  

No voltage exceeds 4kV. 

N/A 

20.2.2 

Internal fire enclosures with openings not exceeding 
1 mm in width and with openings for wires 
completely filled  

 N/A 

20.2.3 

Requirements of 20.2.1 and 20.2.2 met by an 
internal fire enclosure  

 N/A 

 

A.5 

Marking and instructions 

 

N/A 

A.5.1 

j) Marked with IPX4 (IEC 60529), 5.4.1 a) does not 
apply  

 N/A 

A.10 Insulation 

requirements 

 

N/A 

A.10.2 

Splash and humidity treatment 

 

N/A 

A.10.2.1 

Enclosure provides protection against splashing 
water  

 N/A 

A.10.2.2 

Humidity treatment carried out for 7 days  

 

N/A 

 

 

Page 24 of 62                                Report No. SH10011244-001 

IEC 60065

Clause 

Requirement + Test 

Result - Remark 

Verdict 

TRF No. IEC60065J 
 
 
 

 

Complies with IEC 62151 clause 1  

No connected to the 
telecommunication networks 

N/A 

 

Complies with IEC 62151 clause 2  

 

N/A 

 

Complies with IEC 62151 clause 3 but with 3.5.4 
modified to 2.4.10 of this standard  

 N/A 

 

Complies with IEC 62151 clause 4 but with 4.1.2, 
4.1.3 and 4.2.1.2 modified in accordance with annex 
B of this standard  

 N/A 

 

Complies with IEC 62151 cause 5 but with 5.3.1 
modified in accordance with annex B of this  
standard  

 N/A 

 

Complies with IEC 62151 clause 6  

 

N/A 

 

Complies with IEC 62151 clause 7  

 

N/A 

 

Complies with IEC 62151 annex A, B and C  

 

N/A 

 

L. 5 

Marking and instructions 

The EUT is not such apparatus

N/A 

L. 5.4 

Instructions for battery chargers and Supply 
apparatus indicating type or model number of flash 
apparatus with which it is to be used  

 N/A 

 

Instructions for flash apparatus indicating type or 
model number of battery chargers or Supply 
apparatus with which it is to be used  

 N/A 

L. 7 

Heating under normal operating conditions 

 

N/A 

L7.1.5 & 

L11.2.6 

Lithium batteries meet permissible temp rise in Table 
 3 , unless comply with 6.2.2.1.or 6.2.2.2 of IEC 
60086-4  

 N/A 

L. 9 

Electric shock hazard under normal operating 
conditions 

 N/A 

L. 9.1.1 

Terminals to connection to synchroniser not 
HAZARDOUS LIVE  

 N/A 

L.10 Insulation 

requirements 

 

N/A 

L. 10.3.2 

High frequency puls ignition  

 

N/A 

L. 12 

Mechanical strength 

 

N/A 

L. 12.1.3 

Windows for flash tubes are excluded from steel ball 
impact test  

 N/A 

L. 14 

Components 

 

N/A 

 

Page 25 of 62                                Report No. SH10011244-001 

IEC 60065

Clause 

Requirement + Test 

Result - Remark 

Verdict 

TRF No. IEC60065J 
 
 
 

L14.6.6 

Mains switch characteristics appropriate to its 
function under normal conditions  

 N/A 

L. 20 

Resistance to fire 

 

N/A 

L. 20.1 c) 

Trigger coil for discharge purpose is not considered 
to be a POTENTIAL IGNITION SOURCE  

 N/A 

 

 

Page 26 of 62                                Report No. SH10011244-001 

IEC 60065

Clause 

Requirement + Test 

Result - Remark 

Verdict 

TRF No. IEC60065J 
 
 
 

GROUP DIFFERENCES, NATIONAL DEVIATIONS AND SPECIAL NATIONAL CONDITIONS IN THE 
CENELEC COUNTRIES 
 
C = CENELEC COMMON MODIFICATIONS 
 
S = SPECIAL NATIONAL CONDITIONS 
 
A = A-DEVIATIONS (NATIONAL DEVIATION 
 

CONTENTS 
 
C: Add the following annexes: 
 
Annex ZA (normative) Other international 
publications quoted in this standard with the 
references of the relevant European publications 
 
Annex ZB (normative) Special national conditions 
 
Annex ZC (informative) A-deviations 

 Pass 

3.1 

Add the following indent at the end of the list: 

- exposure to excessive sound pressures from 
headphones or earphones. 

 

NOTE A new method of measurement is described 
in EN 50332-1, Sound system equipment: 

Headphones and earphones associated with 
portable audio equipment - Maximum sound 
pressurelevel measurement methodology and limit 
considerations - Part 1: General method for "one 
package equipment”, and in EN 50332-2, Sound 
system equipment: Headphones and earphones 

associated with portable audio equipment - 
Maximum sound pressure level measurement 
methodology and limit considerations - Part 2: 
Guidelines to associate sets with headphones 
coming from different manufacturers. 

Added  

N/A 

4.1.1 

Replace the text of the note by: 

 

NOTE For ROUTINE TEST reference is made to EN 
50333. 

Replaced  

Pass