Harman Kardon HS 2X0 EMC - CB Certificate ▷ View online
Page 3 of 62 Report No. SH10011244-001
TRF No. IEC60065J
Summary of testing:
Tests performed (name of test and test clause):
The sample(s) tested complies with the
requirements of IEC 60065: 2001 + A1: 2005 and
EN 60065: 2002 + A1: 2006.
5 Marking test
5.1 Input Test
7.1 Heating test
9.1.1.1 Determination of hazardous live parts
9.1.1.2 Test Finger
9.1.1.1 Test Probe
9.1.3 Test Pin for Ventilation or Other Holes
9.1.4 Test Pin and Straight Test Probe for
Terminals
9.1.6 Plug Discharge Test
9.1.7 External Force – Rigid Test Finger and Test
Hook
10.2 Humidity Treatment Test
10.3 Insulation resistance test
10.3 Dielectric Strength Test
11 Fault conditions test
12.1.3 Impact Test
12.1.5 Stress Relief Test
12.2 Fixing Test of Actuating Elements
13.2 Determination of Operating Voltage Test
17.1 Screw Fixing Test
The sample(s) tested complies with the
requirements of IEC 60065: 2001 + A1: 2005 and
EN 60065: 2002 + A1: 2006.
5 Marking test
5.1 Input Test
7.1 Heating test
9.1.1.1 Determination of hazardous live parts
9.1.1.2 Test Finger
9.1.1.1 Test Probe
9.1.3 Test Pin for Ventilation or Other Holes
9.1.4 Test Pin and Straight Test Probe for
Terminals
9.1.6 Plug Discharge Test
9.1.7 External Force – Rigid Test Finger and Test
Hook
10.2 Humidity Treatment Test
10.3 Insulation resistance test
10.3 Dielectric Strength Test
11 Fault conditions test
12.1.3 Impact Test
12.1.5 Stress Relief Test
12.2 Fixing Test of Actuating Elements
13.2 Determination of Operating Voltage Test
17.1 Screw Fixing Test
Testing location:
Intertek Testing Services Shanghai
Building No.86, 1198 Qinzhou Road (North), Shanghai
200233, China
200233, China
Summary of compliance with National Differences:
Group- and national differences for the CENELEC countries (EN 60065:2002+A1: 2006). National
differences for UK, Singapore, Malaysia, Korea and China are checked in this report.
differences for UK, Singapore, Malaysia, Korea and China are checked in this report.
Page 4 of 62 Report No. SH10011244-001
TRF No. IEC60065J
Copy of marking plate:
On DVD loader:
Page 5 of 62 Report No. SH10011244-001
TRF No. IEC60065J
Test item particulars:
Classification of installation and use............................ :
Class II
Supply connection ....................................................... :
Portable (desk-top) apparatus with detachable main
cord
cord
Possible test case verdicts:
- test case does not apply to the test object .................:
N/A
- test object does meet the requirement.......................:
P (Pass)
- test object does not meet the requirement.................:
F (Fail)
Testing.:
Date of receipt of test items ..........................................:
January 06, 2010
Date(s) of performance of tests ....................................:
January 06, 2010 – January 26, 2010
General remarks:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory.
"(see Enclosure #)" refers to additional information appended to the report.
"(see appended table)" refers to a table appended to the report.
Throughout this report, a point is used as the decimal separator.
"(see appended table)" refers to a table appended to the report.
Throughout this report, a point is used as the decimal separator.
List of test equipment must be kept on file and available for review.
General product information:
Tropical climate condition considered.
Factory: WANLIDA GROUP CO., LTD
WANLIDA INDUSTRY ZONE, NANJING, FUJIAN, CHINA. 363601
Factory: WANLIDA GROUP CO., LTD
WANLIDA INDUSTRY ZONE, NANJING, FUJIAN, CHINA. 363601
Page 6 of 62 Report No. SH10011244-001
IEC 60065
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065J
3 General
requirements
Safety class of the
apparatus …………………………:
apparatus …………………………:
Class II
Pass
4
General test conditions
4.1.4
Ventilation instructions require the use of the test box No
Pass
5
Marking and instructions
Pass
Comprehensible and easily discernible
Printed on the rear enclosure
Pass
Permanent durability against water and petroleum
spirit
spirit
Pass
5.1
a) Identification, maker ………………………………..: harman/kardon
Pass
b) Model number or type
reference …………………..:
reference …………………..:
HS 2X0
Pass
c) Class II symbol if
applicable ………………………..:
applicable ………………………..:
Pass
d) Nature of
supply ………………………………….....:
supply ………………………………….....:
~
Pass
e) Rated supply
voltage …....…………….……………:
voltage …....…………….……………:
100-240V
Pass
f) Mains frequency if safety dependant ……......…….: 50/60Hz
Pass
g) Rated current or power consumption for
apparatus supplied by supply apparatus for general
use ………:
apparatus supplied by supply apparatus for general
use ………:
N/A
Measured current or power consumption …………...:
N/A
Deviation % (max
10%) ……………………………....:
10%) ……………………………....:
N/A
h) Power consumption marking for apparatus other
than single phase ……………………………..……….:
than single phase ……………………………..……….:
N/A
i) Rated current or power consumption for apparatus
intended for connection to an a.c. mains supply ……:
intended for connection to an a.c. mains supply ……:
300W Pass
Measured current or power consumption …..…….....: 45.8W Pass
Deviation % (max
10%) ……………………………....:
10%) ……………………………....:
Less than 10%
Pass
5.2
Earth terminal
Class II
N/A
Hazardous live terminals
N/A
Supply output terminals (other than mains)
N/A
5.3
Use of triangle with exclamation mark
On PCB
Pass
Click on the first or last page to see other HS 2X0 service manuals if exist.