Harman Kardon HS 100 EU (serv.man14) EMC - CB Certificate ▷ View online
page 48 of 51
Ref. No. : JSH05090075-001
IEC 60065
Clause
Requirement - Test
Result - Remark
Verdict
TRF No: IEC/EN 60065D
TRF originator BEAB
for Europe, Indonesia, Thailand, Vietnam for Europe
Page
49
of
51
Report
No.JSH05090075-001
IEC 60825-1
Clause
Requirement – Test
Result - Remark
Verdict
TRF No: IEC/EN 60065D
TRF originator BEAB
8 CLASSIFICATION
Pass
8.2
Description of laser classes
Class 1
Pass
8.3 Classification
responsibilities
Pass
8.4 Classification
rules
Pass
8.4a
Radiation of a single wavelength
N/A
8.4b
Radiation of multiple wavelengths
Pass
1). Laser product emission two or more
wavelengths in spectral regions shown as
additive in Table 5 ................................................:
wavelengths in spectral regions shown as
additive in Table 5 ................................................:
Visible and IR-A 400nm to
1400nm
1400nm
Pass
2). Laser product emission two or more
wavelengths in spectral regions not shown as
additive in Table 5 ................................................:
wavelengths in spectral regions not shown as
additive in Table 5 ................................................:
N/A
8.4c
Radiation from extended sources
Pass
Value of angular subtence α (mrad) ....................: <1.5mrad
―
8.4d
Non-circular and multiple sources
N/A
8.4e
Time basis
Pass
i)
0.25s
N/A
ii)
100s
applied
Pass
iii)
30000s
N/A
8.4f
Repetitively pulsed or modulated lasers
Considered continuous output
(CW)
(CW)
N/A
i) exposure from a single pulse not exceeding the
AEL for a single pulse
AEL for a single pulse
N/A
ii) average power for a pulse train
N/A
iii) the average pulse energy from pulses within a
pulse train not exceeding the AEL for a single
pulse multiplied by the correction factor C
pulse train not exceeding the AEL for a single
pulse multiplied by the correction factor C
5
N/A
AEL for continued operation
used…......................:
used…......................:
N/A
Total-on-time-pulse (TOTP) method
used….........:
used….........:
N/A
9
MEASUREMENTS FOR CLASSIFICATION
Pass
9.1 Tests
Pass
9.2
Test conditions per Clause 9.2 applied
Pass
Measured laser radiation .....................................: (see appended table)
―
9.3 Measurement
geometry
Pass
a) aperture diameter (mm). ..................................: (see appended table)
Pass
Page
50
of
51
Report
No.JSH05090075-001
IEC 60825-1
Clause
Requirement – Test
Result - Remark
Verdict
TRF No: IEC/EN 60065D
TRF originator BEAB
b) measurement distance (mm)...........................: (see appended table)
Pass
c) angle of acceptance γ . ....................................: (see appended table)
Pass
i) photochemical limits… ...................................: Not 400nm – 600nm
N/A
ii) all other limits ................................................: (see appended table)
Pass
Supplementary information
EQUIPMENT MANUFACTURE INFORMATION ( DATA SHEET ) ABOUT THE
COMPONENT CONTAINING LASER
COMPONENT CONTAINING LASER
Pass
Manufacturer ...................................................... : Toshiba Corporation
―
Type designation ................................................ : TOLD2000MDA
TOLD2000FDA
―
Structure ............................................................. : --
―
Wavelength ........................................................ : 795nm(CD)
658nm(DVD)
―
Output power (min. and max.) ........................... : 5mW/5mW
―
Radiation ............................................................ : Continuous
―
Continuous.......................................................... :
―
Pulsed ................................................................ :
―
Pulse time .......................................................... :
―
Pulse repetition frequency ................................. :
―
Others ................................................................ :
―
LEDs
N/A
Manufacturer....................................................... :
―
Type designation ................................................ :
―
Wavelength ........................................................ :
―
Others ................................................................ :
―
Page
51
of
51
Report
No.JSH05090075-001
IEC 60825-1
Clause
Requirement – Test
Result - Remark
Verdict
TRF No: IEC/EN 60065D
TRF originator BEAB
Details of measurement procedure and measurement results:
Step
specified / measured / calculated
unit
Classification, Laser Class
1
-----
Typical wavelength of laser diode
λ = 795 (CD)
λ = 658 (DVD)
nm
nm
Emission duration
t = ∞(see 9.4)
s
Time basis
T = 100
s
Size of apparent source
assumed extended source at outside
mm
Angular subtense
α < αmin
mrad
Limiting angular subtense
α
min
= 1.5
mrad
Angle of acceptance
α
max
= 100
mrad
Diameter of aperture stop
d = 7
mm
Distance of aperture stop to source
r = 14
mm
Calculation of AEL (Class as above) :
(Radiant Power
[W]
)
Used formula
(CD)Class 1: 3.9 x 10
-4
C
4
C
7
(DVD)Class 1: 3.9 x 10
-4
W
W
Used correction factors
C
4
=10
0.002(
λ
-700)
=1.55
C
7
=1
Accessible emission limit
(CD)Class 1: AEL
radiant
= 0.605
(DVD) Class 1: AEL
radiant
= 0.390
mW
mW
Measurement results:
Class 1
Normal condition
(CD)Pm
= 0.052
(DVD) Pm
= 0.053
mW
mW
Abnormal condition:
Total output power
(CD)Pm
= 0.234
(DVD) Pm
= 0.258
mW
mW