Harman Kardon AVR 80 (serv.man3) User Manual / Operation Manual ▷ View online
Troubleshooting
35
ENGLISH
SYMPTOM
CAUSE
SOLUTION
No front panel lights when power switch
• No AC Power
• Make certain AC power cord is plugged
is pressed
into a live outlet.
• Check to see if outlet is switch controlled.
Display lights, but no sound or picture
• Intermittent input connections
• Make certain that all input and speaker
connections are secure.
•
MUTE
is on
• Press
MUTE
button.
• Volume control is down
• Turn up volume control.
No sound from surround or center speakers
• Incorrect surround mode
• Select a mode other than Dolby 3 Stereo,
Stereo or Monaural.
• Input is monaural
• There is no surround information from
mono sources.
• Incorrect configuration
• Check configuration in
SET UP MENU1.
No On Screen Control Menus
• TV input is “S” Video
• Change TV input to Composite Video.
The menus are available ONLY on Composite
Video.
Video.
Unit does not respond to remote commands
• Weak batteries in remote
• Change remote batteries.
• Remote is in
LEARN
position
• Slide
USE/LEARN
switch to
USE.
• Remote sensor is obscured
• Make certain front panel sensor is visible
to remote.
Intermittent buzzing in tuner
• Local interference
• Move unit or antenna away from computers,
fluorescent lights, TVs, motors or other
electrical appliances.
electrical appliances.
Troubleshooting Chart
Memory Backup
This product is equipped with a memory
backup system that preserves tuner
presets and system configuration
information if the unit is accidentally
unplugged or subject to a power outage.
This memory will last for approximately
one week, after which time all
information must be re-entered.
This product is equipped with a memory
backup system that preserves tuner
presets and system configuration
information if the unit is accidentally
unplugged or subject to a power outage.
This memory will last for approximately
one week, after which time all
information must be re-entered.
System Reset
In the rare case where the unit’s
operation or the displays seem abnormal,
In the rare case where the unit’s
operation or the displays seem abnormal,
the cause may involve the erratic
operation of the system’s memory or
microprocessor.
operation of the system’s memory or
microprocessor.
To correct this problem, first unplug the
unit from the AC wall outlet and wait at
least three minutes. After the pause,
reconnect the AC power cord and check
the unit’s operation. If the system still
malfunctions, a system reset may clear
the problem.
unit from the AC wall outlet and wait at
least three minutes. After the pause,
reconnect the AC power cord and check
the unit’s operation. If the system still
malfunctions, a system reset may clear
the problem.
To clear the system’s memory, press and
hold the
hold the
MEMO
Ú
and
CLEAR
Û
buttons at the same time for a few
seconds. After clearing the memory it will
be necessary to re-establish all system
configuration information and tuner
presets.
seconds. After clearing the memory it will
be necessary to re-establish all system
configuration information and tuner
presets.
If the system is still operating incorrectly,
there may have been an electrostatic
discharge or severe AC line interference
that has corrupted the memory or
microprocessor.
If a reset does not solve the problem,
consult an authorized Harman Kardon
service depot.
there may have been an electrostatic
discharge or severe AC line interference
that has corrupted the memory or
microprocessor.
If a reset does not solve the problem,
consult an authorized Harman Kardon
service depot.
AVR80 manual 11/01/98 13:01 Side 35
Technical Specifications
36
ENGLISH
Audio Section
Stereo Mode
Continuous Average Power (FTC)
Continuous Average Power (FTC)
95 Watts per channel 20Hz–20kHz:
@ < 0.09% THD, both channels driven into 8 Ohms
@ < 0.09% THD, both channels driven into 8 Ohms
Five Channel Surround Mode
Continuous average power per channel (FTC)
Continuous average power per channel (FTC)
Front L&R channels:
85 Watts per channel from 20Hz–20KHz,
@ < 0.15% THD, both channels driven into 8 Ohms
85 Watts per channel from 20Hz–20KHz,
@ < 0.15% THD, both channels driven into 8 Ohms
Center channel:
85 Watts from 20Hz–20kHz,
@ < 0.15% THD, driven into 8 Ohms
85 Watts from 20Hz–20kHz,
@ < 0.15% THD, driven into 8 Ohms
Surround channels:
60 Watts per channel from 40Hz–20kHz,
@ < 0.15% THD, both channels driven into 8 Ohms
60 Watts per channel from 40Hz–20kHz,
@ < 0.15% THD, both channels driven into 8 Ohms
Input Sensitivity/Impedance
Linear
220mV/50 Kohms
Front Main In
1.5 V/20 Kohms
Center Main In
1.5 V/20 Kohms
Surround Main In
1.0 V/20 Kohms
Signal to Noise Rate (IHF-A)
Linear
95 dB
Dolby Surround
Channel Separation
Channel Separation
40dB
Frequency Response
@ 1W (+0, –3dB)
7Hz–80kHz
High Instantaneous
Current Capability (HCC)
Current Capability (HCC)
±30 amps
Transient Intermodulation
Distortion (TIM)
Distortion (TIM)
Unmeasurable
Rise Time
16µsec
Slew Rate
40 V/µsec
FM Tuner Section
Frequency Range
87.5–108.0MHz
Usable Sensitivity
IHF 1.3 µV/13.5dBf
Signal to Noise Ratio
Mono/Stereo 76/68dB
Distortion
Mono/Stereo 0.2/0.5%
Stereo Separation
1 kHz 40dB
Alternate Channel
Selectivity (±300kHz)
Selectivity (±300kHz)
55dB
Image Rejection
98MHz: 70dB
AM Tuner Section
Frequency Range
531–1602 / 152–282kHz
Signal-to-Noise Ratio
50dB
Usable Sensitivity
Loop: 500µV (MW) / 1500µV (LW)
Distortion
1kHz, 30% Mod: 0.5%
Selectivity ±18kHz
70dB
Video Section
Television Format
PAL, NTSC, SECAM
Input Level/Impedance
1Vp-p/75ohms
Output Level/Impedance
1Vp-p/75ohms
Video Frequency Response 10Hz to 8MHz (–3dB)
S/N
S/N
65dB
General
Power Requirement
AC 230V 50Hz
Power Consumption
54W idle, 700W maximum
Dimension (Max)
Width
440 mm (17.4 inches)
Height
160 mm (6.4 inches)
Depth
459 mm (18 inches)
Weight
15 kg (31 lbs.)
All features and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories Licensing Corporation.
Additionally licensed under Canadian patent number 1,037,877.
“Dolby,” “Pro Logic.” the double-D symbol and “AC-3” are registered trademarks of
Dolby Laboratories Licensing Corporation.
Additionally licensed under Canadian patent number 1,037,877.
“Dolby,” “Pro Logic.” the double-D symbol and “AC-3” are registered trademarks of
Dolby Laboratories Licensing Corporation.
Manufactured under license from Lucasfilm Ltd. U.S. patent numbers 5,043,970; 5,189,703;
and 5,222,059. Foreign patents pending. THX and Home THX are registered trademarks of
Lucasfilm Ltd.
and 5,222,059. Foreign patents pending. THX and Home THX are registered trademarks of
Lucasfilm Ltd.
DTS is a trademark of Digital Theater Systems
SDDS is a registered trademark of Sony Corp.
AVR80 manual 11/01/98 13:01 Side 36
Technical Specifications
36
ENGLISH
Audio Section
Stereo Mode
Continuous Average Power (FTC)
Continuous Average Power (FTC)
95 Watts per channel 20Hz–20kHz:
@ < 0.09% THD, both channels driven into 8 Ohms
@ < 0.09% THD, both channels driven into 8 Ohms
Five Channel Surround Mode
Continuous average power per channel (FTC)
Continuous average power per channel (FTC)
Front L&R channels:
85 Watts per channel from 20Hz–20KHz,
@ < 0.15% THD, both channels driven into 8 Ohms
85 Watts per channel from 20Hz–20KHz,
@ < 0.15% THD, both channels driven into 8 Ohms
Center channel:
85 Watts from 20Hz–20kHz,
@ < 0.15% THD, driven into 8 Ohms
85 Watts from 20Hz–20kHz,
@ < 0.15% THD, driven into 8 Ohms
Surround channels:
60 Watts per channel from 40Hz–20kHz,
@ < 0.15% THD, both channels driven into 8 Ohms
60 Watts per channel from 40Hz–20kHz,
@ < 0.15% THD, both channels driven into 8 Ohms
Input Sensitivity/Impedance
Linear
220mV/50 Kohms
Front Main In
1.5 V/20 Kohms
Center Main In
1.5 V/20 Kohms
Surround Main In
1.0 V/20 Kohms
Signal to Noise Rate (IHF-A)
Linear
95 dB
Dolby Surround
Channel Separation
Channel Separation
40dB
Frequency Response
@ 1W (+0, –3dB)
7Hz–80kHz
High Instantaneous
Current Capability (HCC)
Current Capability (HCC)
±30 amps
Transient Intermodulation
Distortion (TIM)
Distortion (TIM)
Unmeasurable
Rise Time
16µsec
Slew Rate
40 V/µsec
FM Tuner Section
Frequency Range
87.5–108.0MHz
Usable Sensitivity
IHF 1.3 µV/13.5dBf
Signal to Noise Ratio
Mono/Stereo 76/68dB
Distortion
Mono/Stereo 0.2/0.5%
Stereo Separation
1 kHz 40dB
Alternate Channel
Selectivity (±300kHz)
Selectivity (±300kHz)
55dB
Image Rejection
98MHz: 70dB
AM Tuner Section
Frequency Range
531–1602 / 152–282kHz
Signal-to-Noise Ratio
50dB
Usable Sensitivity
Loop: 500µV (MW) / 1500µV (LW)
Distortion
1kHz, 30% Mod: 0.5%
Selectivity ±18kHz
70dB
Video Section
Television Format
PAL, NTSC, SECAM
Input Level/Impedance
1Vp-p/75ohms
Output Level/Impedance
1Vp-p/75ohms
Video Frequency Response 10Hz to 8MHz (–3dB)
S/N
S/N
65dB
General
Power Requirement
AC 230V 50Hz
Power Consumption
54W idle, 700W maximum
Dimension (Max)
Width
440 mm (17.4 inches)
Height
160 mm (6.4 inches)
Depth
459 mm (18 inches)
Weight
15 kg (31 lbs.)
All features and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories Licensing Corporation.
Additionally licensed under Canadian patent number 1,037,877.
“Dolby,” “Pro Logic.” the double-D symbol and “AC-3” are registered trademarks of
Dolby Laboratories Licensing Corporation.
Additionally licensed under Canadian patent number 1,037,877.
“Dolby,” “Pro Logic.” the double-D symbol and “AC-3” are registered trademarks of
Dolby Laboratories Licensing Corporation.
Manufactured under license from Lucasfilm Ltd. U.S. patent numbers 5,043,970; 5,189,703;
and 5,222,059. Foreign patents pending. THX and Home THX are registered trademarks of
Lucasfilm Ltd.
and 5,222,059. Foreign patents pending. THX and Home THX are registered trademarks of
Lucasfilm Ltd.
DTS is a trademark of Digital Theater Systems
SDDS is a registered trademark of Sony Corp.
AVR80 manual 11/01/98 13:01 Side 36
Technical Specifications
36
ENGLISH
Audio Section
Stereo Mode
Continuous Average Power (FTC)
Continuous Average Power (FTC)
95 Watts per channel 20Hz–20kHz:
@ < 0.09% THD, both channels driven into 8 Ohms
@ < 0.09% THD, both channels driven into 8 Ohms
Five Channel Surround Mode
Continuous average power per channel (FTC)
Continuous average power per channel (FTC)
Front L&R channels:
85 Watts per channel from 20Hz–20KHz,
@ < 0.15% THD, both channels driven into 8 Ohms
85 Watts per channel from 20Hz–20KHz,
@ < 0.15% THD, both channels driven into 8 Ohms
Center channel:
85 Watts from 20Hz–20kHz,
@ < 0.15% THD, driven into 8 Ohms
85 Watts from 20Hz–20kHz,
@ < 0.15% THD, driven into 8 Ohms
Surround channels:
60 Watts per channel from 40Hz–20kHz,
@ < 0.15% THD, both channels driven into 8 Ohms
60 Watts per channel from 40Hz–20kHz,
@ < 0.15% THD, both channels driven into 8 Ohms
Input Sensitivity/Impedance
Linear
220mV/50 Kohms
Front Main In
1.5 V/20 Kohms
Center Main In
1.5 V/20 Kohms
Surround Main In
1.0 V/20 Kohms
Signal to Noise Rate (IHF-A)
Linear
95 dB
Dolby Surround
Channel Separation
Channel Separation
40dB
Frequency Response
@ 1W (+0, –3dB)
7Hz–80kHz
High Instantaneous
Current Capability (HCC)
Current Capability (HCC)
±30 amps
Transient Intermodulation
Distortion (TIM)
Distortion (TIM)
Unmeasurable
Rise Time
16µsec
Slew Rate
40 V/µsec
FM Tuner Section
Frequency Range
87.5–108.0MHz
Usable Sensitivity
IHF 1.3 µV/13.5dBf
Signal to Noise Ratio
Mono/Stereo 76/68dB
Distortion
Mono/Stereo 0.2/0.5%
Stereo Separation
1 kHz 40dB
Alternate Channel
Selectivity (±300kHz)
Selectivity (±300kHz)
55dB
Image Rejection
98MHz: 70dB
AM Tuner Section
Frequency Range
531–1602 / 152–282kHz
Signal-to-Noise Ratio
50dB
Usable Sensitivity
Loop: 500µV (MW) / 1500µV (LW)
Distortion
1kHz, 30% Mod: 0.5%
Selectivity ±18kHz
70dB
Video Section
Television Format
PAL, NTSC, SECAM
Input Level/Impedance
1Vp-p/75ohms
Output Level/Impedance
1Vp-p/75ohms
Video Frequency Response 10Hz to 8MHz (–3dB)
S/N
S/N
65dB
General
Power Requirement
AC 230V 50Hz
Power Consumption
54W idle, 700W maximum
Dimension (Max)
Width
440 mm (17.4 inches)
Height
160 mm (6.4 inches)
Depth
459 mm (18 inches)
Weight
15 kg (31 lbs.)
All features and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories Licensing Corporation.
Additionally licensed under Canadian patent number 1,037,877.
“Dolby,” “Pro Logic.” the double-D symbol and “AC-3” are registered trademarks of
Dolby Laboratories Licensing Corporation.
Additionally licensed under Canadian patent number 1,037,877.
“Dolby,” “Pro Logic.” the double-D symbol and “AC-3” are registered trademarks of
Dolby Laboratories Licensing Corporation.
Manufactured under license from Lucasfilm Ltd. U.S. patent numbers 5,043,970; 5,189,703;
and 5,222,059. Foreign patents pending. THX and Home THX are registered trademarks of
Lucasfilm Ltd.
and 5,222,059. Foreign patents pending. THX and Home THX are registered trademarks of
Lucasfilm Ltd.
DTS is a trademark of Digital Theater Systems
SDDS is a registered trademark of Sony Corp.
AVR80 manual 11/01/98 13:01 Side 36
