Sony KF-60DX100 Service Manual ▷ View online
Installing and Connecting the LCD Projection TV
37
Ins
talli
ng a
ng a
nd Con
n
ec
ting t
ting t
h
e L
C
D
Pr
oje
Pr
oje
c
tio
n
n
TV
Connecting a DVD Player with A/V Connectors
Use this hookup if:
❑
Your DVD player does not have component (Y, P
B
, P
R
) jacks.
Disconnect all power sources before making any connections.
1
Using audio cables, connect the DVD player’s Audio OUT jacks to the
LCD projection TV’s AUDIO IN jacks.
LCD projection TV’s AUDIO IN jacks.
2
Using an S VIDEO cable, connect the DVD player’s S VIDEO jack to
the LCD projection TV’s S VIDEO jack.
the LCD projection TV’s S VIDEO jack.
✍
If your DVD player has video component output connectors: for best
picture quality use the connection described on page 36.
picture quality use the connection described on page 36.
Rear of LCD projection TV
YC-15V/30V
(not supplied)
(not supplied)
DVD player
RK-74A (not supplied)
AUDIO-R (red)
AUDIO-L (white)
S VIDEO
✍
To take advantage of the Wide Screen modes, set the TV’s aspect ratio to
16:9 on your DVD player. For details, refer to the operating instructions
supplied with your DVD player.
16:9 on your DVD player. For details, refer to the operating instructions
supplied with your DVD player.
✍
Use TV/VIDEO on the remote control to switch between the VCR, DVD
player and cable TV inputs.
player and cable TV inputs.
✍
If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow)
instead of the S VIDEO cable.
instead of the S VIDEO cable.
Installing and Connecting the LCD Projection TV
38
Connecting a Digital TV Receiver
Disconnect all power sources before making any connections.
1
Using three separate component video cables, connect the Digital TV
Set-top box’s Y, P
Set-top box’s Y, P
B
and P
R
jacks to the LCD projection TV.
2
Using an audio cable, connect the Digital TV Set-top box’s Audio OUT
jacks to the LCD projection TV’s AUDIO IN jacks.
jacks to the LCD projection TV’s AUDIO IN jacks.
✍
The Y, P
B
and P
R
jacks do not provide audio, so audio cables must
be connected to provide sound.
✍
Component video connection is necessary to view 480i, 480p, 720p,
and 1080i formats. You may also use the S VIDEO or Composite
Video connections, however, component video (Y, P
and 1080i formats. You may also use the S VIDEO or Composite
Video connections, however, component video (Y, P
B
, P
R
) will
provide the best picture quality for all format types.
Be sure to read the
Set-top box manual.
z
VMC-10HG (not supplied)
Digital TV Set-top box
RK-74A (not supplied)
AUDIO-R (red)
AUDIO-L (white)
Rear of LCD projection TV
P
R
P
B
Y
✍
You cannot record the signal from any equipment connected into the
Y, P
Y, P
B
and P
R
connectors.
✍
This LCD projection TV is not compatible with digital TV receivers
configured with RGB or VGA output connectors.
configured with RGB or VGA output connectors.
Installing and Connecting the LCD Projection TV
39
Ins
talli
ng a
ng a
nd Con
n
ec
ting t
ting t
h
e L
C
D
Pr
oje
Pr
oje
c
tio
n
n
TV
Connecting a Camcorder
For easy connection of the camcorder, the LCD projection TV has side
Audio and Video inputs (shown below). However, if you prefer, you can also
connect the camcorder to the LCD projection TV’s rear Audio and Video IN
jacks.
Audio and Video inputs (shown below). However, if you prefer, you can also
connect the camcorder to the LCD projection TV’s rear Audio and Video IN
jacks.
Using AUDIO and S VIDEO cables, connect the camcorder’s Audio and
S VIDEO OUT jacks to the LCD projection TV’s AUDIO and S VIDEO IN
jacks.
S VIDEO OUT jacks to the LCD projection TV’s AUDIO and S VIDEO IN
jacks.
✍
If you have a mono camcorder, connect its left audio output to the LCD
projection TV’s AUDIO L (MONO) jack.
projection TV’s AUDIO L (MONO) jack.
✍
If your camcorder is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
(yellow) instead of the S VIDEO cable.
S VIDEO
VIDEO
VIDEO 2 IN
L
(MONO)
AUDIO
R
VIDEO (yellow)
A/V output
AUDIO-L (white)
AUDIO-R (red)
S VIDEO
YC-15V/30V (not supplied)
VMC-810S/820S
(not supplied)
(not supplied)
Installing and Connecting the LCD Projection TV
40
Connecting an AV Receiver
For greater control of all audio and video equipment, connect an AV receiver.
Disconnect all power sources before making any connections.
1
Connect the coaxial cable from the incoming cable connection or
antenna to IN on the VCR.
antenna to IN on the VCR.
2
Using a coaxial cable, connect OUT on the VCR to VHF/UHF on the
LCD projection TV.
LCD projection TV.
3
Using a VIDEO cable, connect VIDEO of VIDEO 1 IN on the LCD
projection TV to MONITOR OUT on the AV receiver.
projection TV to MONITOR OUT on the AV receiver.
4
Using an AUDIO/VIDEO cable, connect TV OUT on the LCD
projection TV to AUDIO/VIDEO 2 IN on the AV receiver.
projection TV to AUDIO/VIDEO 2 IN on the AV receiver.
5
Using an AUDIO/VIDEO cable, connect the video equipment to the AV
receiver.
receiver.
6
Select the Setup menu and set “Video Label” to “Receiver” to fix your
LCD projection TV’s input to AV receiver (see “
LCD projection TV’s input to AV receiver (see “
Video Label
” on page
68).
✍
Change “Video Label” for the VIDEO 1 input to “Receiver” (see page 68).
Rear of LCD projection TV
AUDIO-L
AUDIO-R
VMC-10HG (not supplied)
Cable/
Antenna
Antenna
Coaxial cable (not supplied)
VMC-810S/820S
(not supplied)
(not supplied)
VMC-810S/820S
(not supplied)
(not supplied)
AUDIO/
VIDEO 1 IN
VIDEO 1 IN
AUDIO/VIDEO 1 OUT
AV receiver
VMC-810S/820S (not supplied)
MONITOR
OUT
OUT
VIDEO
VIDEO
VCR
AUDIO/
VIDEO 2 IN
VIDEO 2 IN
Click on the first or last page to see other KF-60DX100 service manuals if exist.