DOWNLOAD Sony HDR-SR11 / HDR-SR11E / HDR-SR12 / HDR-SR12E (serv.man3) Service Manual ↓ Size: 760.69 KB | Pages: 48 in PDF or view online for FREE

6-28

HDR-SR11/SR11E/SR12/SR12E_ADJ

13) After the checking, if the [OK] button in the message window

is clicked, “12. MAX GAIN Adj.” is executed.

14) Upon successful completion of the “12. MAX GAIN Adj.”,

“13. Release of Data Setting during Camera Adj.” is executed.

15) Upon successful completion of all items of the CAMERA

Adjustment 5, the following message is displayed. Click the
[OK] button.

6-29

HDR-SR11/SR11E/SR12/SR12E_ADJ

Before performing the defect adjustment, make sure that
the lens temperature of the camcorder 33 ºC to 36 ºC.

[Preparation (Temperature Check)]
1) Click the [Preparation] button of the CAMERA Adjustment 6

to display the Preparation screen.

2) Click the [Temperature Check] button of the Preparation screen,

the following screen will appear.

[Checking method]
Click the [Start]  button of the Temperature Check, and the
camcorder will go in the Temperature Check mode and the tem-
perature check result will be displayed on the LCD screen. Per-
form the aging if the check result is NG (below 33 ºC). To exit the
Temperature Check mode, click the [Stop] button.

[Aging method]
Set the camcorder to the Movie mode, and place the LCD screen
in the “reverse-closed” state. (In this state, the temperature rises
more quickly than that in other states.)
Set the camcorder to the Temperature Check mode, and wait until
the LCD screen display changes from NG (grid pattern) to OK
(color bars).

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. White Defect Adj. (FD white point)
3. White Defect Adj.
4. Black Defect Adj.
5. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 6.
2) The Automatic Adjustment Program executes “1. Data Setting

during Camera Adj.”.

3) If “1. Data Setting during Camera Adj.” completed success-

fully, and the items from “2. White Defect Adj. (FD white
point)” to “3. White Defect Adj.” will be executed.

4) If “3. White Defect Adj.” completed successfully, the follow-

ing message is displayed. Set the subject in accordance with
the message.

5) Click the [OK] button, and the “4. Black Defect Adj.” will be

executed.

6) Upon completion of “4. Black Defect Adj.”, “5. Release of

Data Setting during Camera Adj.” is executed.

7) Upon successful completion of all items of the CAMERA Ad-

justment 6, the following message is displayed. Click the [OK]
button.

6-30

HDR-SR11/SR11E/SR12/SR12E_ADJ

“CAMERA Adjustment 7” is available only once after the
power is turned on. If the adjustment is retried, turn off the
power and turn on again.

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Strobe Light Level & White Balance Adj.
3. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 7.
2) The Automatic Adjustment Program executes “1. Data Setting

during Camera Adj.”.

3) Upon successful completion of the “1. Data Setting during

Camera Adj.”, the following message is displayed. Set the sub-
ject in accordance with the message.
(For the Flash adjustment box, refer to “6. Preparing the Flash
Adjustment Box” (see page 6-6).)

4) Press the [OK] button, and the items “2. Strobe Light Level &

White Balance Adj.” will be executed.

5) Upon completion of “2. Strobe Light Level & White Balance

Adj.”, “3. Release of Data Setting during Camera Adj.” is ex-
ecuted

6) Upon successful completion of all items of the CAMERA Ad-

justment 7, the following message is displayed. Click the [OK]
button.

6-31

HDR-SR11/SR11E/SR12/SR12E_ADJ

Preparation:
1) Read the PITCH sensor (FR-278 board SE9001) sensitivity

written on repair parts, and named this as S

9001

.

2) Read the YAW sensor (FR-278 board SE9002) sensitivity writ-

ten on repair parts, and named this as S

9002

.

With the pins 1 and 2 of angular velocity sensor placed in the
lower position, read the data value.

For the sensor sensitivity value 60

Perform this adjustment only when replacing the GYRO sensor or
lens block. When the microprocessor, circuit etc. is damaged, don't
perform this adjustment but check the operations only.

Note down the sensitivity displayed on the GYRO sensor of the re-
pair parts. At this time, note down also to which board it was attached
to.
Be sure to check because if attached incorrectly, the screen will vi-
brate up and down or left and right during the steady shot operations.

The PITCH sensor and the YAW sensor are different parts.

The sensor incorporates a precision oscillator. Handle it with care as
if it dropped, the balance of oscillator will be disrupted and opera-
tions will not be performed properly.

Adjustment Block

11

Adjustment Page

8F

Adjustment Address

FF70, FF71

The sensor sensitivity of SE9001 and SE9002 of the FR-
278 board is written only repair parts.

SE9001

SE9002

FR-278 BOARD (SIDE B)

1

2

3

4

PP

12

3

4

YY

YY: YAW sensor
       sensitivity     S

9002

PP: PITCH sensor
       sensitivity     S

9001

6 0

Hand Writing

1

2

4

3