Sony HDR-SR11 / HDR-SR11E / HDR-SR12 / HDR-SR12E (serv.man3) Service Manual ▷ View online
6-20
HDR-SR11/SR11E/SR12/SR12E_ADJ
1-7.
CAMERA SYSTEM ADJUSTMENTS
1.
Function of Each Button on Camera System
Adjustment Screen
Adjustment Screen
Click the [CAMERA SYSTEM ADJUSTMENT] button on the Main
Menu screen, and the “CAMERA SYSTEM ADJUSTMENT”
screen in Fig. 6-1-14 will appear.
Menu screen, and the “CAMERA SYSTEM ADJUSTMENT”
screen in Fig. 6-1-14 will appear.
Fig. 6-1-14
1
[To Menu] button
The Main Menu screen comes back.
The Main Menu screen comes back.
2
[Preparation] button
Notes for adjustment or jigs used are displayed.
Notes for adjustment or jigs used are displayed.
3
[Start] button
Each adjustment from “Camera Adjustment 1” to “Camera
Adjustment 8” starts.
Each adjustment from “Camera Adjustment 1” to “Camera
Adjustment 8” starts.
4
[Release Data Setting] button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the camera adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the camera adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
4
3
3
2
1
2
3
6-21
HDR-SR11/SR11E/SR12/SR12E_ADJ
2.
Adjustment Items of Camera System Adjustment
The adjustment items of camera system adjustment are as listed in
Table 6-1-4. The Automatic Adjustment Program divides the ad-
justment items into eight, camera adjustment 1-8. Clicking either
CAMERA Adjustment Start button allows the adjustment item
which corresponds to that button to be executed.
Table 6-1-4. The Automatic Adjustment Program divides the ad-
justment items into eight, camera adjustment 1-8. Clicking either
CAMERA Adjustment Start button allows the adjustment item
which corresponds to that button to be executed.
The adjustment conditions of the subject and filter vary depend-
ing on which item is adjusted. The Adjustment Program displays
an instruction for the subject and filter as a message during the
adjustment.
ing on which item is adjusted. The Adjustment Program displays
an instruction for the subject and filter as a message during the
adjustment.
Block
Page
Address
STEADY HALL Adj.
11
8F
FF00 to FF5F
HALL & MR Adj.
11
8F
0700 to 0709, 0490,
04A0 to 04AF
04A0 to 04AF
Siemens star chart with ND filter for
minipattern box (Note) or
Flange back adjustment jig
Flange back adjustment chart and
subject more than 500 m away
minipattern box (Note) or
Flange back adjustment jig
Flange back adjustment chart and
subject more than 500 m away
CAMERA
Adjustment 3
Adjustment 3
Flange Back Check
Siemens star chart
-
-
-
F No. & ND Light Quality
Standard Data Input
Standard Data Input
11
8F
0710 to 0757
Mechanical Shutter Adj.
11
8F
0240 to 0245
Linear Matrix Adj.
Not required
11
8F
0360 to 03B9
AWB Standard Data Input
11
8F
0308 to 031F
LV Standard Data Input
11
8F
070C, 070D
AWB Adj.
Clear chart (All White frame)
Filter C14 for color temperature correction
Filter C14 for color temperature correction
11
8F
0320 to 0337
AWB Check
Clear chart (All White frame)
ND filter 1.0, 0.4 and 0.1
ND filter 1.0, 0.4 and 0.1
-
-
-
Color Reproduction Adj. &
Check (Indoor)
Check (Indoor)
Color bar chart
(Color reproduction adjustment frame)
(Color reproduction adjustment frame)
11
8F
0340 to 035F
Color Reproduction Check
(Outdoor)
(Outdoor)
Color bar chart
(Color reproduction adjustment frame)
Filter C14 for color temperature correction
(Color reproduction adjustment frame)
Filter C14 for color temperature correction
-
-
-
MAX GAIN Adj.
Clear chart (Center frame)
11
8F
070E, 070F
White Defect Adj.
(FD white point)
(FD white point)
11
8F
2460 to 36FF, 3C60 to 4EFF,
5460 to 66FF, 6C60 to 7EFF
5460 to 66FF, 6C60 to 7EFF
White Defect Adj.
11
8F
2000 to 365F, 3800 to 4E5F,
5000 to 665F, 6800 to 7E5F
5000 to 665F, 6800 to 7E5F
Black Defect Adj.
Clear chart (All White)
(Shoot the clear chart with the zoom TELE
end.)
(Shoot the clear chart with the zoom TELE
end.)
11
8F
2588 to 37FF, 3D88 to 4FFF,
5588 to 67FF, 6D88 to 7FFF
5588 to 67FF, 6D88 to 7FFF
CAMERA
Adjustment 7
Adjustment 7
Strobe Light Level &
White Balance Adj.
White Balance Adj.
Flash adjustment box
11
8F
0238 to 023D, 0306, 0307
CAMERA
Adjustment 8
Adjustment 8
GYRO Sensor Sensitivity Adj.
Not required
11
8F
FF70, FF71
Adjusting Address
11
Button Name
Adjustment
Subject
0480 to 049F
Not required
CAMERA
Adjustment 1
Adjustment 1
Note:
Dark Siemens star chart.
CAMERA
Adjustment 2
Adjustment 2
Flange Back Adj.
8F
CAMERA
Adjustment 6
Adjustment 6
CAMERA
Adjustment 5
Adjustment 5
CAMERA
Adjustment 4
Adjustment 4
Not required
Clear chart (All White frame)
Not required
Table 6-1-4
6-22
HDR-SR11/SR11E/SR12/SR12E_ADJ
3.
CAMERA Adjustment 1
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. STEADY HALL Adj.
3. HALL & MR Adj.
4. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. STEADY HALL Adj.
3. HALL & MR Adj.
4. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 1.
2) The Automatic Adjustment Program executes “1. Data Setting
1) Click the [Start] button of the CAMERA Adjustment 1.
2) The Automatic Adjustment Program executes “1. Data Setting
during Camera Adj.”.
3) If “1. Data Setting during Camera Adj.” completed success-
fully, and the items from “2. STEADY HALL Adj.” to “4.
Release of Data Setting during Camera Adj.” will be executed.
Release of Data Setting during Camera Adj.” will be executed.
4) Upon successful completion of all items of the CAMERA Ad-
justment 1, the following message is displayed. Click the [OK]
button.
button.
6-23
HDR-SR11/SR11E/SR12/SR12E_ADJ
[Preparation (Using the flange back adjustment jig)]
(Illuminance: approx. 800 lux)
(Illuminance: approx. 800 lux)
Note:
When using the flange back adjustment jig, take care of the
following points:
• For the illumination, use a light source such as an incan-
following points:
• For the illumination, use a light source such as an incan-
descent lamp or inverter type fluorescent light free from
flickering.
flickering.
• Do not make an adjustment in the environment where fluo-
rescent lamp flickering occurs even if the illuminance can
be ensured with the room illumination only. Use an in-
candescent lamp or inverter type fluorescent light at a place
free from the influence of room illumination.
be ensured with the room illumination only. Use an in-
candescent lamp or inverter type fluorescent light at a place
free from the influence of room illumination.
1) Install the flange back adjustment jig so that the distance be-
tween it and the front of lens of camera is less than 3 cm.
2) Make the height of flange back adjustment jig and the camera
equal.
3) Check that the center of chart meets the center of shot image
screen with the zoom lens at TELE end and WIDE end respec-
tively.
tively.
Fig. 6-1-16
[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 2.
2) The Automatic Adjustment Program executes “1. Data Setting
1) Click the [Start] button of the CAMERA Adjustment 2.
2) The Automatic Adjustment Program executes “1. Data Setting
during Camera Adj.”.
3) Upon successful completion of the “1. Data Setting during
Camera Adj.”, the following message is displayed. Set the sub-
ject by referring to “Preparation”.
ject by referring to “Preparation”.
4) If the [OK] button is clicked, “2. Flange Back Adj.” and “3.
Release of Data Setting during Camera Adj.” will be executed.
5) Upon successful completion of all items of the CAMERA
Adjustment 2, the following message is displayed. Click the
[OK] button.
[OK] button.
4.
CAMERA Adjustment 2
(Using the minipattern box or flange back adjust-
ment jig)
(Using the minipattern box or flange back adjust-
ment jig)
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Flange Back Adj.
3. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. Flange Back Adj.
3. Release of Data Setting during Camera Adj.
[Preparation (Using the minipattern box)]
1) The minipattern box is installed as shown in the following fig-
1) The minipattern box is installed as shown in the following fig-
ure.
Note:
The attachment lenses are not used.
2) Install the minipattern box so that the distance between it and
the front of lens of camera is less than 3 cm.
3) Make the height of minipattern box and the camera equal.
4) Check the output voltage of the regulated power supply is the
4) Check the output voltage of the regulated power supply is the
specified voltage
± 0.01 Vdc.
5) Check that the center of Siemens star chart meets the center of
shot image screen with the zoom lens at TELE end and WIDE
end respectively.
end respectively.
Specified voltage: The specified voltage varies according to the
minipattern box, so adjustment the power sup-
ply output voltage to the specified voltage writ-
ten on the sheet which is supplied with the
minipattern box.
ply output voltage to the specified voltage writ-
ten on the sheet which is supplied with the
minipattern box.
Fig. 6-1-15
Minipattern box
Below 3 cm
Camera
Red (+)
Black (–)
Yellow (SENS +)
White (SENS –)
Black (GND)
Need not connected
Regulated power supply
Output voltage : Specified voltage
±
0.01 Vdc
Output current : more than 3.5 A
Flange back adjustment jig
Below 3 cm
Camera
Click on the first or last page to see other HDR-SR11 / HDR-SR11E / HDR-SR12 / HDR-SR12E (serv.man3) service manuals if exist.