DOWNLOAD Sony DCR-DVD403 / DCR-DVD403E / DCR-DVD803 / DCR-DVD803E (serv.man3) Service Manual ↓ Size: 1.04 MB | Pages: 82 in PDF or view online for FREE

6-37

DCR-DVD403/DVD403E/DVD803/DVD803E

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during LCD/EVF Adj.
2. LCD/EVF Automatic Adj.

(VCO Adj. (LCD/EVF), Contrast Adj. (LCD/EVF))

3. White Balance Adj. (EVF)
4. V-COM Adj. (LCD)
5. Transmissive Mode White Balance Adj. (LCD)
6. Reflective Mode White Balance Adj. (LCD)
7. Touch Panel Adj. 1
8. Touch Panel Adj. 2
9. Release of Data Setting during LCD/EVF Adj.

[Adjusting method]
1) Select the model (NTSC Model or PAL Model) with the Model

Select radio button.

NTSC model: DCR-DVD403/DVD803
PAL model: DCR-DVD403E/DVD803E

2) Click the 

[Start]

 button of the LCD/EVF Adjustment.

3) The Automatic Adjustment Program executes the “1. Data

Setting during LCD/EVF Adj.” and “2. LCD/EVF Automatic
Adj.”.

4) If “2. LCD/EVF Automatic Adj.” completed successfully, the

following screen is displayed during the execution of  “3. White
Balance Adj. (EVF)”. Check that the EVF screen is not col-
ored. If colored, using the 

[Up]

 / 

[Down]

 button on the screen,

adjust so that the EVF screen is not colored. After the adjust-
ment, click the 

[End]

 button in the screen.

5) If the 

[End]

 button is clicked, the following screen is displayed

during the execution of “4. V-COM Adj. (LCD)”. Using the

[Up]

 / 

[Down]

 button on the screen, adjust so that the bright-

ness of portions A and B on the LCD panel is equal. After the
adjustment, click the 

[End]

 button in the screen.

6) If the 

[End]

 button is clicked, the following screen is displayed

during the execution of “5. Transmissive Mode White Balance
Adj. (LCD)”. Check that the LCD screen is not colored. If
colored, using the 

[Up]

 / 

[Down]

 button on the screen, adjust

so that the LCD screen is not colored. After the adjustment,
click the 

[End]

 button in the screen.

7) If the 

[End]

 button is clicked, “6. Reflective Mode White Bal-

ance Adj. (LCD)” will be executed.

6-38

DCR-DVD403/DVD403E/DVD803/DVD803E

8) Upon successful completion of the “6. Reflective Mode White

Balance Adj. (LCD)”, “7. Touch Panel Adj. 1” will be executed.
The following message is displayed, and then adjust the LCD
screen in accordance with the instructions given on the screen.
After the adjustment, click the 

[OK]

  button in the message

window.

9) If the 

[OK]

 button is clicked, “8. Touch Panel Adj. 2” and “9.

Release of Data Setting during LCD/EVF Adj.” will be ex-
ecuted.

10) Upon successful completion of all item the LCD/EVF Adjust-

ment, the following message is displayed. Click the 

[OK]

 but-

ton.

6-39

DCR-DVD403/DVD403E/DVD803/DVD803E

Click the 

[AUDIO SYSTEM ADJUSTMENT]

 button on the Mein

Menu screen, and the “AUDIO SYSTEM ADJUSTMENT” screen
in Fig. 6-1-17 will appear.

1

[To Menu]

 button

The Main Menu screen comes back.

2

[Preparation]

 button

Notes for adjustment or jigs used are displayed.

3

[Start]

 button

“Audio Adjustment” starts.

4

[Release Data Setting]

 button

The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”.
When the data setting is cancelled, the button color returns to
“white”. (Use this button when an error occurred in the audio
adjustment. If the adjustment completed successfully, the data
setting is automatically cancelled and the button color returns
to “white”.)

4

3

2

1

The adjustment items of audio system adjustment are as listed in
Table 6-1-5. The Automatic Adjustment Program executes the ad-
justment items if the AUDIO Adjustment Start button is clicked.

Internal 4ch Microphone
Sensitivity Adj. 

0B

0C to 0F

AUDIO
Adjustment

6-40

DCR-DVD403/DVD403E/DVD803/DVD803E

Perform “AUDIO Adjustment” without inserting disc.

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during AUDIO Adj.
2. Internal 4ch microphone Adj.
3. Release of Data Setting during Audio Adj.

[Preparation]
Prepare an amplifier built-in speaker for PC and arrange it above
the internal 4ch microphone of the camcoder.

•

Adjust the speaker position so that it is within 

±

3 cm from the

center of camcoder.

•

The diaphragm of speaker position should face face down to-
ward the internal 4ch microphone.

•

The speaker may be held by hand if it is hard to secure.

[Adjusting method]
1) Play back the adjustment sound source file on the PC.
2) Set the speaker volume so that the adjustment signal sound is

heard to the extent of the loudness of talking voices.

3) Click the 

[Start]

 button of the AUDIO Adjustment.

4) The Automatic Adjustment Program executes “1. Data Setting

during Audio Adj.”.

5) If “1. Data Setting during Audio Adj.” completed successfully,

and the items “2. Internal 4ch microphone Adj.” and “3. Re-
lease of Data Setting during Audio Adj.” will be executed.

6) Upon successful completion of all items of the AUDIO Ad-

justment, the following message is displayed. Click the 

[OK]

button.

In case of adjustment NG, reduce or increase the speaker volume,
and then retry adjustment.
If the Adjustment Program displays a message “Volume too loud”
or  “Volume too low”, adjust the speaker volume following the
message.

Amplifier built-in 
speaker for PC

PC

Internal 4ch 
microphone

about 40 cm