DOWNLOAD Sony DCR-DVD403 / DCR-DVD403E / DCR-DVD803 / DCR-DVD803E (serv.man3) Service Manual ↓ Size: 1.04 MB | Pages: 82 in PDF or view online for FREE

6-33

DCR-DVD403/DVD403E/DVD803/DVD803E

6) After setting the picture frame, if the 

[End]

 button is clicked,

the following message is displayed. Then, change the chart in
accordance with the message.

7) If the 

[OK]

 button is clicked, the adjustment items “3. Mixed

Color Compensation Adj.” and “4. F No. & ND Light Quality
Standard Data Input” are executed.

8) Upon successful completion of the “4. F No. & ND Light Qual-

ity Standard Data Input”, the following message is displayed.
Then, change the chart in accordance with the message.

9) If the 

[OK]

  button is clicked, “5. Picture Frame Setting (All

White Frame)” is executed. The following messages are dis-
played in the order given below during the execution. Then,
set the picture frame in accordance with the messages.

10) After the setting, if the 

[OK]

 button is clicked, the adjustment

items from “6. AWB Standard Data Input” to “8. AWB Adj.”
are executed. During the execution, the following messages
are displayed in the order given below. Place or remove the
filters on the lens in accordance with the messages.

11) Upon successful completion of the “8. AWB Adj.”, the follow-

ing message is displayed. Then, change the chart in accordance
with the message.

12) If the 

[OK]

 button is clicked, the adjustment items “9. Color

Reproduction Adj.” and “10. Color Reproduction Check” are
executed. The following messages are displayed in order, and
then operate the vectorscope to make a check with the color
reproduction frame in accordance with the message.

R-Y

B-Y

R

B

G

M

G

Y

E

C

Y

Burst position

R-Y

B-Y

R

B

G

M

G

Y

E

C

Y

Burst position

6-34

DCR-DVD403/DVD403E/DVD803/DVD803E

13) Upon successful completion of the “10. Color Reproduction

Check”, the following message is displayed. Then, change the
chart in accordance with the message.

14) After the setting, if the 

[OK]

 button is clicked, the adjustment

items “11. AWB Check” and “12. AWB Outdoor Vector Check”
are executed. During the execution, the following messages
are displayed in the order given below. Place or remove the
filters on the lens in accordance with the messages, and check
that the luminance point settles in the circle.

15) Upon completion of “12. AWB Outdoor Vector Check”, the

following message is displayed during the execution of “13.
Picture Frame Setting (Center Frame)”. Set the subject in ac-
cordance with the message, and then check the size of clear
chart shot on the monitor screen.

16) After the checking, if the 

[OK]

 button in the message window

is clicked, “14. MAX GAIN Adj.” and “15. Mechanical Shut-
ter Adj.” are executed.

17) Upon successful completion of the “15. Mechanical Shutter

Adj.”, “16. Release of Data Setting during Camera Adj.” is
executed.

18) Upon successful completion of all items of the CAMERA

Adjustment 4, the following message is displayed. Click the

[OK]

 button.

6-35

DCR-DVD403/DVD403E/DVD803/DVD803E

“CAMERA Adjustment 5” is available only once after the
power is turned on. If the adjustment is retried, turn off the
power and turn on again.

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Strobe Light Level Adj.
3. Strobe White Balance Adj.
4. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the 

[Start]

 button of the CAMERA Adjustment 5.

2) The Automatic Adjustment Program executes “1. Data Setting

during Camera Adj.”.

3) Upon successful completion of the “1. Data Setting during

Camera Adj.”, the following message is displayed. Set the sub-
ject in accordance with the message.
(For the Flash adjustment box, refer to “4. Preparing the Flash
Adjustment Box” (see page 6-7).)

4) Press the 

[OK]

 button, and the items “2. Strobe Light Level

Adj.” and “3. Strobe White Balance Adj.” will be executed.

5) Upon completion of “3. Strobe White Balance Adj.”, “4. Re-

lease of Data Setting during Camera Adj.” is executed

6) Upon successful completion of all items of the CAMERA Ad-

justment 5, the following message is displayed. Click the 

[OK]

button.

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Steady Shot Check
3. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the 

[Start]

 button of the CAMERA Adjustment 6.

2) The Automatic Adjustment Program executes “1. Data Setting

during Camera Adj.”.

3) Upon successful completion of the “1. Data Setting during

Camera Adj.”, the following message is displayed.
With the camcoder in stationary state, click the 

[OK]

 button.

4) If the 

[OK]

 button is clicked, “2. Steady Shot Check” is ex-

ecuted.
Upon successful completion of the “2. Steady Shot Check”,
the following message is displayed. Check that the steadyshot
function operates normally in accordance with the message.

5) If the 

[OK]

 button is clicked, “3. Release of Data Setting dur-

ing Camera Adj.” is executed.

6) Upon successful completion of all items of the CAMERA

Adjustment 6, the following message is displayed. Click the

[OK]

 button.

How to reset the flash error flag
When the flash error code (E:91: ** ) is displayed. After repair,
clear the error flag in the following method.

Order Page Address Data

Procedure

1

7

01

75

2

7

00

01

Press PAUSE button.

3

7

02

Check the data is “01”.

6-36

DCR-DVD403/DVD403E/DVD803/DVD803E

Click the 

[LCD/EVF SYSTEM ADJUSTMENT]

 button on the

Main Menu screen, and the “LCD/EVF SYSTEM ADJUST-
MENT” screen in Fig. 6-1-16 will appear.

1

[To Menu]

 button

The Main Menu screen comes back.

2

[Start]

 button

“LCD/EVF Adjustment” starts.

3

Model Select radio button
Selects the model to be adjusted.

NTSC model: DCR-DVD403/DVD803
PAL model: DCR-DVD403E/DVD803E

4

[Release Data Setting]

 button

The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the LCD/EVF ad-
justment. If the adjustment completed successfully, the data
setting is automatically cancelled and the button color returns
to “white”.)

The adjustment items of LCD/EVF system adjustment are as listed
in Table 6-1-4. The Automatic Adjustment Program executes the
adjustment items if the LCD/EVF Adjustment Start button is
clicked.

4

3

2

1

VCO Adj. (EVF)

0C

3F, 40

Contrast Adj. (EVF)

0C

47

VCO Adj. (LCD)

0C

50, 51

Contrast Adj. (LCD)

0C

58

White Balance Adj. (EVF)

0C

45, 46

V-COM Adj. (LCD)

0C

52

Transmissive Mode White
Balance Adj. (LCD)

0C

56, 57

Reflective Mode White
Balance Adj. (LCD)

0C

7B, 7C

Touch Panel Adj. 1

0A

90 to 93

Touch Panel Adj. 2

1A

10 to 3F

LCD/EVF
Adjustment