DOWNLOAD Sony DCR-DVD403 / DCR-DVD403E / DCR-DVD803 / DCR-DVD803E (serv.man3) Service Manual ↓ Size: 1.04 MB | Pages: 82 in PDF or view online for FREE

6-21

DCR-DVD403/DVD403E/DVD803/DVD803E

Click the 

[Initializing of Flash Back Up]

 button on the Main Menu

screen, and the “Initializing of Flash Back Up” screen in Fig. 6-1-
9 will appear.

[Initializing method]
1) Click the 

[Initializing Start]

 button.

2) The initialization finishes when the following message is dis-

played.

6-22

DCR-DVD403/DVD403E/DVD803/DVD803E

Click the

 [VIDEO SYSTEM ADJUSTMENT]

 button on the Main

Menu screen, and the “VIDEO SYSTEM ADJUSTMENT” screen
in Fig. 6-1-10 will appear.

1

[To Menu]

 button

The Main Menu screen comes back.

2

[Preparation]

 button

Notes for adjustment or jigs used are displayed.

3

[Start]

 button

“Video Adjustment” starts.

4

[Release Data Setting]

 button

The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the video adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)

The adjustment items of video system adjustment are as listed in
Table 6-1-2. The Automatic Adjustment Program executes the ad-
justment items if the VIDEO Adjustment Start button is clicked.

4

3

2

1

(Note)

67.5MHz/54MHz 
Origin Oscillation Adj.

Frequency
counter

IC2801 LINE OUT Y
Gain Adj.

Y signal terminal of S VIDEO plug of
A/V jack (75 ohm terminated)

R2150 (Pin <zc. of IC2101 (SPCK))
on VC-397 board

Oscilloscope

0C

80

0F

10

IC2801 LINE OUT
Chroma Gain Adj.

Chroma signal terminal of S VIDEO
plug of A/V jack (75 ohm terminated)

Oscilloscope

0C

81, 82

S VIDEO OUT Y
Level Adj.

Y signal terminal of S VIDEO plug of
A/V jack (75 ohm terminated)

Oscilloscope

0C

25

S VIDEO OUT
Chroma Level Adj.

Chroma signal terminal of S VIDEO
plug of A/V jack (75 ohm terminated)

–

–

–

–

Oscilloscope

0C

26, 27

IC2801 Adj.

0C

83 to 8A, 99,
A1 to A3

VIDEO OUT  Level
Check

VIDEO terminal of A/V jack (75 ohm
terminated)

Oscilloscope

VIDEO
Adjustment

 The Automatic Adjustment Program does not support.

6-23

DCR-DVD403/DVD403E/DVD803/DVD803E

Set the frequency of the clock for synchronization.
If deviated, the synchronization will be disrupted and the color
will become inconsistent.

Subject

Not required

Measurement Point

R2150 (Pin <zc. of IC2101 (SPCK))
on VC-397 board

Measuring Instrument

Frequency counter

Adjustment Page

F

Adjustment Address

10

Specified value

f = 13500000 

±

 68 Hz

NTSC model: DCR-DVD403/DVD803
PAL model: DCR-DVD403E/DVD803E

Switch setting
1) POWER ............................................................. MOVIE mode

Order Page Address Data

Procedure

1

0

01

01

2

F

10

Change the data and set the
frequency (f) to the specified
value.

3

F

10

Press PAUSE button.

4

0

01

00

IC2101

IC2901

R2150

VC-397 board (SIDE A)

6-24

DCR-DVD403/DVD403E/DVD803/DVD803E

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Video Adj.
2. IC2801 LINE OUT Y Gain Adj.
3. IC2801 LINE OUT Chroma Gain Adj.
4. S VIDEO OUT Y Level Adj.
5. S VIDEO OUT Chroma Level Adj.
6. IC2801 Adj.
7. VIDEO OUT Level Check
8. Release of Data Setting during Video Adj.

[Adjusting method]
1) Click the 

[Start]

 button of the VIDEO Adjustment.

2) The Automatic Adjustment Program executes the “1. Data

Setting during Video Adj.”.

3) If “1. Data Setting during Video Adj.” completed successfully,

the following screen is displayed during the execution of “2.
IC2801 LINE OUT Y Gain Adj.”. Using the 

[Up]

 / 

[Down]

button on the screen, adjust so that the Y signal level satisfies
the specified value. After the adjustment, click the [End] but-
ton in the screen.

4) After that, the following screen is displayed during the execu-

tion of “3. IC2801 LINE OUT Chroma Gain Adj.”. Using the

[Up]

 / 

[Down]

 button on the screen, adjust so that the Cr sig-

nal level and the Cb signal level satisfies the specified value.
After the adjustment, check that the burst level of the chroma
signals satisfies the specified value, and click the 

[End]

 but-

ton in the screen.

5) If the 

[End]

 button is clicked, the following screen is displayed

during the execution of “4. S VIDEO OUT Y Level Adj.”. Us-
ing the 

[Up]

 / 

[Down]

 button on the screen, adjust so that the

Y signal level satisfies the specified value.