DOWNLOAD Sony DCR-DVD403 / DCR-DVD403E / DCR-DVD803 / DCR-DVD803E (serv.man3) Service Manual ↓ Size: 1.04 MB | Pages: 82 in PDF or view online for FREE

6-25

DCR-DVD403/DVD403E/DVD803/DVD803E

 6) After that, the following screen is displayed during the execu-

tion of “5. S VIDEO OUT Chroma Level Adj.”. Using the 

[Up]

/ 

[Down]

  button on the screen, adjust so that the Cr signal

level and the Cb signal level satisfies the specified value. After
the adjustment, check that the burst level of the chroma sig-
nals satisfies the specified value, and click the 

[End]

 button in

the screen.

7) If the 

[End]

  button is clicked, “6. IC2801 Adj.” will be ex-

ecuted.

 8) Upon successful completion of the “6. IC2801 Adj.”, “7.

VIDEO OUT Level Check” will be executed. The following
message and screen are displayed. Check that the sync signal
level and burst level of the video signals satisfies the specified
value, and click the 

[OK]

 button in the message.

9) If the [End] button is clicked, “8. Release of Data Setting dur-

ing Video Adj.” will be executed.

10) Upon successful completion of all item the VIDEO Adjust-

ment, the following message is displayed. Click the 

[OK]

 but-

ton.

6-26

DCR-DVD403/DVD403E/DVD803/DVD803E

Click the 

[CAMERA SYSTEM ADJUSTMENT]

 button on the Main

Menu screen, and the “CAMERA SYSTEM ADJUSTMENT”
screen in Fig. 6-1-12 will appear.

1

[To Menu]

 button

The Main Menu screen comes back.

2

[Preparation]

 button

Notes for adjustment or jigs used are displayed.

3

[Start]

 button

Each adjustment from “Camera Adjustment 1” to “Camera
Adjustment 6” starts.

4

Model Select radio button
Selects the model to be adjusted.

NTSC model: DCR-DVD403/DVD803
PAL model: DCR-DVD403E/DVD803E

5

[Release Data Setting]

 button

The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the camera adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)

5

4

3

2

1

2

3

3

6-27

DCR-DVD403/DVD403E/DVD803/DVD803E

The adjustment items of camera system adjustment are as listed in
Table 6-1-3. The Automatic Adjustment Program divides the ad-
justment items into six, camera adjustment 1-6. Clicking either
CAMERA Adjustment Start button allows the adjustment item
which corresponds to that button to be executed.
The adjustment conditions of the subject and filter vary depend-
ing on which item is adjusted. The Adjustment Program displays
an instruction for the subject and filter as a message during the
adjustment.

HALL Adj.

0F

13 to 1B

MR Adj.

0F

58, 5A to 65

CCD Output 2ch Matching Adj. (1)

19

14 to 1F

CCD Output 2ch Matching Adj. (2)

Clear chart (All White)
(Shoot the clear chart with the zoom
TELE end.)

19

00 to 11

Siemens star chart with ND filter for
minipattern box (Note) or
Flange back adjustment jig

Flange back adjustment chart and
subject more than 500 m away

CAMERA
Adjustment 3

Flange Back Check

Siemens star chart

Mixed Color Compensation Adj.

Mixed color compensation chart
(Color reproduction adjustment frame)

14

98 to 9F, A8 to B7

F No. & ND Light Quality
Standard Data Input

Not required

0F

1C to 29

0F

2E to 31

14

E8 to F3

LV Standard Data Input

0F

2A, 2B

0F

32 to 35, 44 to 47

14

F4 to FF

Color Reproduction Adj.

14

A0 to A7

Color Reproduction Check

AWB Check

Clear chart (All White frame)
ND filter 1.0, 0.4 and 0.1

AWB Outdoor Vector Check

Clear chart (All White frame)
Filter C14 for color temperature
correction

MAX GAIN Adj.

Clear chart (Center frame)

0F

2C

Mechanical Shutter Adj.

Not required

0F

76 to 8B

Strobe Light Level Adj.

0F

8C to 91

Strobe White Balance Adj.

0F

3E, 3F

CAMERA
Adjustment 6

Steady Shot Check

Not required

Not required

CAMERA
Adjustment 1

CAMERA
Adjustment 2

0F

11, 48 to 58

Flange Back and Zoom Lever
Center Adj.

Clear chart (All White frame)

Clear chart (All White frame)
Filter C14 for color temperature
correction

Color bar chart
(Color reproduction adjustment frame)

Flash adjustment box

CAMERA
Adjustment 5

CAMERA
Adjustment 4

AWB Standard Data Input

AWB Adj.

–

–

–

–

–

–

–

–

–

–

 Dark Siemens star chart.

6-28

DCR-DVD403/DVD403E/DVD803/DVD803E

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. HALL Adj.
3. MR Adj.
4. CCD Output 2ch Matching Adj. (1)
5. CCD Output 2ch Matching Adj. (2)
6. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the 

[Start]

 button of the CAMERA Adjustment 1.

2) The Automatic Adjustment Program executes “1. Data Setting

during Camera Adj.”.

3) If “1. Data Setting during Camera Adj.” completed success-

fully, and the items from “2. HALL Adj.” to “4. CCD Output
2ch Matching Adj.(1)” will be executed.

4) Upon successful completion of the “4. CCD Output 2ch Match-

ing Adj.(1)”, the following message is displayed. Set the sub-
ject in accordance with the message.

5) Click the 

[OK]

 button, and the “5. CCD Output 2ch Matching

Adj.(2)” will be executed.

6) Upon completion of “5. CCD Output 2ch Matching Adj.(2)”,

“6. Release of Data Setting during Camera Adj.” is executed.

7) Upon successful completion of all items of the CAMERA Ad-

justment 1, the following message is displayed. Click the 

[OK]

button.