Sony DCR-DVD403 / DCR-DVD403E / DCR-DVD803 / DCR-DVD803E (serv.man3) Service Manual ▷ View online
6-53
DCR-DVD403/DVD403E/DVD803/DVD803E
2-4-2.
Adjusting Method
Note 1:
In the process of adjusting optical power, CLASS 1M laser optical radiates.
So do not remove the Optical sensor desc.
So do not remove the Optical sensor desc.
Note 2:
Before exiting the AUDIT, click the [SET] button of “After completing the TEST” to cancel the TEST mode.
Order
1
2
3
4
5
6
7
8
9
10
Diagnostic item
Preset & Power
Read Power
R Write Power
R Off Power
RW Erase Power
ANMON &
RW Bias Adjust
RW Peak Power
Shock Sensor
Operation
Click the
[START]
button of “POWER Ad-
justment”.
Set the Optical sensor disc, and with the disc
cover left open, click the
cover left open, click the
[OK]
button in the
message window. (Note 1)
(If the diagnosis result of previous item is OK,
this item is executed successively.)
this item is executed successively.)
(If the diagnosis result of previous item is OK,
this item is executed successively.)
this item is executed successively.)
(If the diagnosis result of previous item is OK,
this item is executed successively.)
this item is executed successively.)
(If the diagnosis result of previous item is OK,
this item is executed successively.)
this item is executed successively.)
(If the diagnosis result of previous item is OK,
this item is executed successively.)
this item is executed successively.)
(If the diagnosis result of previous item is OK,
this item is executed successively.)
this item is executed successively.)
Remove the Optical sensor disc.
(At this time, when the Shock Sensor senses
a shock normally, this message disappears.)
(At this time, when the Shock Sensor senses
a shock normally, this message disappears.)
(On the AUDIT screen, if the status lamps of
respective adjustment buttons are all lit in
green, the adjustment is over.)
respective adjustment buttons are all lit in
green, the adjustment is over.)
Message
Disc
No Disc
Optical sensor disc
No Disc
No Disc
6-54
DCR-DVD403/DVD403E/DVD803/DVD803E
2-5.
DVD-R ADJUSTMENT
2-5-1.
Menu in DVD-R Adjustment Section
START button:
All items of adjustment buttons are ex-
ecuted in the descending order.
ecuted in the descending order.
Adjustment button:
Only the adjustment item assigned to the
button name is executed.
button name is executed.
Status lamp:
Adjustment status is displayed with color.
White
White
Not adjusted
Red blinking
Adjustment in progress
Green
Adjustment OK
Red
Adjustment NG
START button
Status lamp
Adjustment buttons
Fig. 6-2-14
6-55
DCR-DVD403/DVD403E/DVD803/DVD803E
2-5-2.
Adjusting Method
Note:
Before exiting the AUDIT, click the
[SET]
button of “After completing the TEST” to cancel the TEST mode.
Order
1
2
3
4
5
6
7
8
9
10
Diagnostic item
OP Sensitivity
Offset Adjust
Wobble BPF
Center
FE Balance
Write FE Bal
Disc Distinction
Threshold
Servo Adjust
Jitter & BLER
Operation
Click the
[START]
button of “DVD-R Ad-
justment”.
Set the DVD-R Reference Disc, and then
close the disc cover and click the
close the disc cover and click the
[OK]
but-
ton in the message window.
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
Remove the DVD-R Reference Disc, and set
the DVD-R for Self Jitter Disc, and then close
the disc cover and click the
the DVD-R for Self Jitter Disc, and then close
the disc cover and click the
[OK]
button in
the message window.
Remove the DVD-R for Self Jitter Disc.
(On the AUDIT screen, if the status lamps of
respective adjustment buttons are all lit in
green, the adjustment is over.)
(On the AUDIT screen, if the status lamps of
respective adjustment buttons are all lit in
green, the adjustment is over.)
Message
Disc
No Disc
DVD-R
Reference Disc
Reference Disc
DVD-R
for Self Jitter Disc
for Self Jitter Disc
No Disc
6-56
DCR-DVD403/DVD403E/DVD803/DVD803E
START button
Status lamp
Adjustment buttons
2-6.
DVD-RW ADJUSTMENT
2-6-1.
Menu in DVD-RW Adjustment Section
START button:
All items of adjustment buttons are ex-
ecuted in the descending order.
ecuted in the descending order.
Adjustment button:
Only the adjustment item assigned to the
button name is executed.
button name is executed.
Status lamp:
Adjustment status is displayed with color.
White
White
Not adjusted
Red blinking
Adjustment in progress
Green
Adjustment OK
Red
Adjustment NG
Fig. 6-2-15
Click on the first or last page to see other DCR-DVD403 / DCR-DVD403E / DCR-DVD803 / DCR-DVD803E (serv.man3) service manuals if exist.