Sony SAL70200G2 Service Manual ▷ View online
2-3
SAL70200G2 (2.8/70-200 G SSM Ⅱ) (70-200mm F2.8 G SSM II)
2-2. DISASSEMBLY-2
REPAIR PARTS LIST
REPAIR PARTS LIST
REPAIR PARTS LIST
B-10
B-10
LOCTITE 460 or the equivalent
LOCTITE 460 or the equivalent
B-40
G-85
A-20
G-85
A-20
B-10
Stator
HELP21
HELP19
HELP22
HELP29
HELP30
HELP30
HELP31
HELP32
HELP33
HELP34
HELP34
HELP35
HELP36
HELP37
B-40
G-85
A-20
HELP39
B-40
G-85
A-20
HELP38
HELP40
B-40
HELP41
HELP42
HELP44
HELP23
HELP24
B-10
HELP24
HELP25
HELP27
A-20
A-20
G-85
HELP26
B-10
HELP20
B-40
HELP28
B-10
HELP24
G-115
G-115
G-117
HELP39
HELP39
HELP43
LOCTITE 460
or the equivalent
or the equivalent
G-85
C
D
2
1
5
4
5
5
MR ADJUSTNMENT
ULTRASONIC MOTOR
HEIGHT ADJUSTMENT
HEIGHT ADJUSTMENT
Front Holding
Barrel
Barrel
Focus Hold
Button Base
Button Base
Click Plate
FOCUS BRUSH
POSITION
ADJUSTMENT
POSITION
ADJUSTMENT
B
B
A
A
C
D
DV Encoder Flexible PC Board
Zoom Encoder
Flexible
Tube (Connect Barrel)
6
A
A
C
B
B
C
USM Holder Ring
Distance Scale Sheet
Pressure Plate
Sheet (White)
2
Rotor
Sheet (under) (PETP)
Sheet (center) (Black)
Spring
Rotor Hold Ring
Rotor Rubber
Bearing
Holding Ring
Holding Ring
Focus Rubber
Ring
Ring
MF Connection Ring,
Rotation Detector
Encoder PWB
Rotation Detector
Encoder PWB
Focus Driving
Tube Block
Tube Block
MF Operation Ring
SW Flexible
Setting Tape
Setting Tape
MF Linkage Pin
Stator Hold Sheet B
Stator Hold
Sheet B
Sheet B
Polyester Tape
(Black) 10 mm
(Black) 10 mm
Note:
Do not touch the surface
mating to the rotor.
Do not touch the surface
mating to the rotor.
1
A
E
F
H
G
B
D
C
H
F
G
E
A
C
B
D
4th Lens Barrel
3
2
Mirror Tube Block
3rd Lens Block
Guide Key
Guide Key
Light Shield
Barrel Rubber
Barrel Rubber
3rd Lens Barrel
3rd Lens Block
Outer Tube
4th Lens Block Guide Pin
4th Guide Roller
Focus Stopper Pin
Focus Guide Pin
(3rd Lens Barrel)
(3rd Lens Barrel)
Focus Guide Pin
(2 Group Move Frame
Tube Unit)
(2 Group Move Frame
Tube Unit)
Focus Guide Roller
(3rd Lens Barrel)
(3rd Lens Barrel)
Focus Guide Roller
(2 Group Move Frame Tube Unit)
(2 Group Move Frame Tube Unit)
MF Detection Brush Block
A Encoder Brush
A Encoder Brush
Focus Hold Button Block
Front Holding Tube Block
MR Sensor Block
FH Flexible PC Board
1
A Encoder Brush Block
Focus Hold
Button Block
Button Block
2 Group Move Frame Tube
3
4
5
4
5
6
7
8
8
q;
9
Note:
Do not touch the resin coated
surface (black coated side).
Do not touch the resin coated
surface (black coated side).
3
Focus Hold Button Block
2-4
SAL70200G2 (2.8/70-200 G SSM Ⅱ) (70-200mm F2.8 G SSM II)
2-2. DISASSEMBLY-3
REPAIR PARTS LIST
REPAIR PARTS LIST
B-40
B-40
HELP45
HELP46
HELP46
B-10
HELP47
B-10
HELP47
HELP48
B-40
HELP45
B-40
HELP45
B-40
HELP45
LOCTITE 460
or the equivalent
or the equivalent
LOCTITE 460 or the equivalent
LOCTITE 460 or the equivalent
LOCTITE 460 or the equivalent
HELP49
HELP50
HELP50
G-85
G-85
G-85
A
A
B
B
Mount
6
1
Main Spring
Aperture Connect Lever
Signal Box Block
Main Spring Hook
Outside Barrel
5
Stopper Screw
Polyester Tape
(Black) 10mm
(Black) 10mm
Polyester Tape (Black) 4mm
Polyester Tape
3
2
4
Rear Light Shield Barrel
7
G
G
F
F
E
E
SW1 Shielding Rubber
Click Plate
Switch Cover
SW1 Shielding Rubber
SW1
SW2
SW2 Shielding Rubber
SW Box Flexible Block
Switch Base Plate
SW Flexible Setting Tape
SW Flexible Setting Tape
SW1
1
3
4
5
2
6
2-5
HELP
Note for assembling and grease applying positions are shown.
SAL70200G2 (2.8/70-200 G SSM Ⅱ) (70-200mm F2.8 G SSM II)
HELP01
Grease (G-85): J-6082-626-A
Adhesive (Adhesive ivory white):
Note:
Adhesive (Adhesive ivory white):
Note:
Use the glue (adhesive ivory white) or the equivalent
1. Affix the tripod mount friction sheet to the tripod mount as shown in the figure.
Note:
Affix the tripod mount friction sheet, starting from the cut portion. Do not cover the cut portion with the tripod mount
friction sheet.
Tripod Mount
Cut portion
Cut view
Cut view
Tripod Mount Friction Sheet
2. Apply the grease (G-85) to the mating face of tripod mount knob and screw portion. Then, insert the tripod mount knob as far as it goes
to the tripod mount.
3. After tightening the screw to the extent that the tripod mount knob comes off, turn it back half turn (Loosen).
4. Apply the adhesive (adhesive ivory white) to the indicated portion.
4. Apply the adhesive (adhesive ivory white) to the indicated portion.
Note:
It is not necessary to fill the screw hole with the adhesive. Apply the adhesive to the head of screw and hole.
Apply the Grease
(G-85)
(G-85)
Apply the adhesive bond
(Adhesive ivory white)
(Adhesive ivory white)
Tripod Mount Knob
Tripod Mount
Tripod
Mount
Mount
Tripod Mount Knob
Screw
Screw
HELP02
Mount the tripod washer block to the lens body, aligning the mount index with the red mark on the tripod mount.
Tripod Washer Block
Mount Index
Red mark on the Tripod Mount
2-6
SAL70200G2 (2.8/70-200 G SSM Ⅱ) (70-200mm F2.8 G SSM II)
HELP03
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-40): J-6082-614-A
Adhesive (adhesive ivory white)
Note:
Adhesive bond (B-40): J-6082-614-A
Adhesive (adhesive ivory white)
Note:
Use the adhesive (adhesive ivory white) or the equivalent.
1. Apply the anti-diffusion agent (A-20) to the indicated portion (all circumferences) of outer barrel.
2. Install the outer barrel, aligning the CL-033 board with the switch base plate block installation window.
3. Connect the connector of switch base plate block to the CL-033 board.
4. Rotate the outer barrel in the arrow direction so that the mount index is aligned with the length hole.
5. Apply the adhesive bond (B-40) to tips of four screws and fix the switch base plate block with four screws.
6. Paint the cross-slot on the head of screw. (Four locations)
2. Install the outer barrel, aligning the CL-033 board with the switch base plate block installation window.
3. Connect the connector of switch base plate block to the CL-033 board.
4. Rotate the outer barrel in the arrow direction so that the mount index is aligned with the length hole.
5. Apply the adhesive bond (B-40) to tips of four screws and fix the switch base plate block with four screws.
6. Paint the cross-slot on the head of screw. (Four locations)
Note:
The white paint should not leak from the cross-slot.
Outer Barrel
Outer Barrel
Connector of
switch base plate block
switch base plate block
Cut view
Inside
5 mm
Outside
Cut
view
view
Apply the anti-diffusion
agent (A-20) (All round)
agent (A-20) (All round)
Switch base plate
block installation
window
block installation
window
CL-033 Board
CL-033 Board
Apply the white paint
Rotate the outer barrel
Length hole
Mount Index
Apply the
adhesive
bond (B-40)
adhesive
bond (B-40)
7. Set the zoom operation ring to the WIDE end.
8. Apply the adhesive bond (B-40) to the tips of four screws and fix the outer barrel with four screws tentatively to the extent that the outer
8. Apply the adhesive bond (B-40) to the tips of four screws and fix the outer barrel with four screws tentatively to the extent that the outer
barrel moves a little in the rotational direction.
9. Align 70 on the zoom scale with the center of index of outer barrel and tighten four screw firmly.
10. Push the outer barrel to the 1st lens and tighten the outer barrel with three slotted head paling end screws.
10. Push the outer barrel to the 1st lens and tighten the outer barrel with three slotted head paling end screws.
Then, apply the adhesive (adhesive ivory white) to head of screws (Three locations).
Note:
Note:
The adhesive (adhesive ivory white) should not seep out.
Set to the wide
end position
end position
Zoom Operation Ring
Fix with four screws tentatively
to the extent that the outer barrel
moves a little in the rotational direction.
to the extent that the outer barrel
moves a little in the rotational direction.
Apply the
adhesive
bond (B-40)
adhesive
bond (B-40)
Apply the
adhesive
bond (B-40)
adhesive
bond (B-40)
Tighten three paling end screws and
apply the adhesive (adhesive ivory white)
to the head.
apply the adhesive (adhesive ivory white)
to the head.
Align the position and
tighten the screws firmly.
tighten the screws firmly.
Index
Click on the first or last page to see other SAL70200G2 service manuals if exist.