Sony SAL70200G2 Service Manual ▷ View online
4-4
DISASSEMBLY
(ENGLISH)
DISASSEMBLY
(JAPANESE)
SAL70200G2 (2.8/70-200 G SSM Ⅱ) (70-200mm F2.8 G SSM II)
4-1-7. SELECTION PARTS
Ref No. 9
To meet the operational movement of related parts, select the type.
Part No.
Description
2-691-846-01 PIN (TRIPOD MOUNT SCREW) (L=2.2mm)
2-691-846-11 PIN (TRIPOD MOUNT SCREW) (L=3.5mm)
2-691-846-11 PIN (TRIPOD MOUNT SCREW) (L=3.5mm)
Ref No. 10
To meet the operational movement of related parts, select the type.
Part No.
Description
2-691-847-01 ROLLER (TRIPOD BASE ROLLER) (L=1.9mm)
2-691-847-11 ROLLER (TRIPOD BASE ROLLER) (L=3.4mm)
2-691-847-11 ROLLER (TRIPOD BASE ROLLER) (L=3.4mm)
Ref No. 22
These are parts (washer) for image point shift adjustment.
According to the result of image point shift adjustment, select the
thickness (t).
According to the result of image point shift adjustment, select the
thickness (t).
Part No.
Description
2-691-553-01 WASHER(FOCUS POINT MOVEMENT
ADJUSTMENT WASHER A) (t=0.05mm)
2-691-554-01 WASHER(FOCUS POINT MOVEMENT
ADJUSTMENT WASHER B) (t=0.07mm)
2-691-555-01 WASHER(FOCUS POINT MOVEMENT
ADJUSTMENT WASHER C) (t=0.10mm)
2-691-556-01 WASHER(FOCUS POINT MOVEMENT
ADJUSTMENT WASHER D) (t=0.20mm)
2-691-557-01 WASHER(FOCUS POINT MOVEMENT
ADJUSTMENT WASHER E) (t=0.50mm)
Ref No. 52
These are parts (washer) for flange back adjustment.
According to the result of flange back adjustment, select the thick-
ness (t).
According to the result of flange back adjustment, select the thick-
ness (t).
Part No.
Description
2-691-806-01 WASHER (BACK ADJUSTMENT A) (t=0.05mm)
2-691-807-01 WASHER (BACK ADJUSTMENT B) (t=0.07mm)
2-691-808-01 WASHER (BACK ADJUSTMENT C) (t=0.10mm)
2-691-809-01 WASHER (BACK ADJUSTMENT D) (t=0.20mm)
2-691-810-01 WASHER (BACK ADJUSTMENT E) (t=0.50mm)
2-691-807-01 WASHER (BACK ADJUSTMENT B) (t=0.07mm)
2-691-808-01 WASHER (BACK ADJUSTMENT C) (t=0.10mm)
2-691-809-01 WASHER (BACK ADJUSTMENT D) (t=0.20mm)
2-691-810-01 WASHER (BACK ADJUSTMENT E) (t=0.50mm)
Ref No. 57
Normally, use two aperture blade spacers B.
Only when the trouble of aperture dynamic property occurs, use
two aperture blade spacers A.
Only when the trouble of aperture dynamic property occurs, use
two aperture blade spacers A.
Part No.
Description
2-691-803-01 PLATE (APERTURE BLADE SPACER WASHER A)
(t=0.2mm)
2-691-804-01 PLATE (APERTURE BLADE SPACER WASHER B)
(t=0.3mm)
(t=0.2mm)
2-691-804-01 PLATE (APERTURE BLADE SPACER WASHER B)
(t=0.3mm)
Ref No. 75
These are parts (washer) for focus-shift check/adjustment (aper-
ture (amount of spherical aberration)).
According to the result of focus-shift check/adjustment (aperture
(amount of spherical aberration)), select the thickness (t).
ture (amount of spherical aberration)).
According to the result of focus-shift check/adjustment (aperture
(amount of spherical aberration)), select the thickness (t).
Part No.
Description
2-691-550-01 WASHER (ASPHERICAL ABERRATION A (t=0.05mm)
2-691-551-01 WASHER (ASPHERICAL ABERRATION A (t=0.07mm)
2-691-552-01 WASHER (ASPHERICAL ABERRATION A (t=0.10mm)
2-691-551-01 WASHER (ASPHERICAL ABERRATION A (t=0.07mm)
2-691-552-01 WASHER (ASPHERICAL ABERRATION A (t=0.10mm)
Ref No. 119
These are parts (washer) for MR adjustment.
According to the result of image point shift adjustment, select the
thickness (t).
According to the result of image point shift adjustment, select the
thickness (t).
Part No.
Description
4-450-989-01 MR SPACER (t=0.05mm)
4-450-989-11 MR SPACER (t=0.07mm)
4-450-989-21 MR SPACER (t=0.10mm)
4-450-989-31 MR SPACER (t=0.20mm)
4-450-989-11 MR SPACER (t=0.07mm)
4-450-989-21 MR SPACER (t=0.10mm)
4-450-989-31 MR SPACER (t=0.20mm)
Ref No. 203
To meet the operational movement of related parts, select the type.
Part No.
Description
2-691-746-01 ROLLER (4TH GUIDE ROLLER A) (D=5.53mm)
2-691-747-01 ROLLER (4TH GUIDE ROLLER B) (D=5.52mm)
2-691-748-01 ROLLER (4TH GUIDE ROLLER C) (D=5.51mm)
2-691-749-01 ROLLER (4TH GUIDE ROLLER D) (D=5.50mm)
2-691-750-01 ROLLER (4TH GUIDE ROLLER E) (D=5.49mm)
2-691-747-01 ROLLER (4TH GUIDE ROLLER B) (D=5.52mm)
2-691-748-01 ROLLER (4TH GUIDE ROLLER C) (D=5.51mm)
2-691-749-01 ROLLER (4TH GUIDE ROLLER D) (D=5.50mm)
2-691-750-01 ROLLER (4TH GUIDE ROLLER E) (D=5.49mm)
2-691-751-01 ROLLER (4TH GUIDE ROLLER F) (D=5.48mm)
2-890-608-01 ROLLER (G), 4 GROUP GUIDE (D=5.47mm)
2-890-609-01 ROLLER (H), 4 GROUP GUIDE (D=5.46mm)
3-277-713-01 4TH GUIDE ROLLER I (D=5.54mm)
4-146-240-01 ROLLER (J), 4 GROUP GUIDE (D=5.55mm)
2-890-608-01 ROLLER (G), 4 GROUP GUIDE (D=5.47mm)
2-890-609-01 ROLLER (H), 4 GROUP GUIDE (D=5.46mm)
3-277-713-01 4TH GUIDE ROLLER I (D=5.54mm)
4-146-240-01 ROLLER (J), 4 GROUP GUIDE (D=5.55mm)
Ref No. 205
To meet the operational movement of related parts, select the type.
Part No.
Description
2-691-739-01 ROLLER (FOCUS GUIDE ROLLER A) (D=5.53mm)
2-691-740-01 ROLLER (FOCUS GUIDE ROLLER B) (D=5.52mm)
2-691-741-01 ROLLER (FOCUS GUIDE ROLLER C) (D=5.51mm)
2-691-742-01 ROLLER (FOCUS GUIDE ROLLER D) (D=5.50mm)
2-691-743-01 ROLLER (FOCUS GUIDE ROLLER E) (D=5.49mm)
2-691-740-01 ROLLER (FOCUS GUIDE ROLLER B) (D=5.52mm)
2-691-741-01 ROLLER (FOCUS GUIDE ROLLER C) (D=5.51mm)
2-691-742-01 ROLLER (FOCUS GUIDE ROLLER D) (D=5.50mm)
2-691-743-01 ROLLER (FOCUS GUIDE ROLLER E) (D=5.49mm)
2-691-744-01 ROLLER (FOCUS GUIDE ROLLER F) (D=5.48mm)
2-890-606-01 ROLLER (G), FOCUS GUIDE (D=5.47mm)
2-890-607-01 ROLLER (H), FOCUS GUIDE (D=5.46mm)
3-398-232-01 FOCUS GUIDE ROLLER I (D=5.54mm)
4-146-239-01 ROLLER (J), FOCUS GUIDE (D=5.55mm)
2-890-606-01 ROLLER (G), FOCUS GUIDE (D=5.47mm)
2-890-607-01 ROLLER (H), FOCUS GUIDE (D=5.46mm)
3-398-232-01 FOCUS GUIDE ROLLER I (D=5.54mm)
4-146-239-01 ROLLER (J), FOCUS GUIDE (D=5.55mm)
4-5
SAL70200G2 (2.8/70-200 G SSM Ⅱ) (70-200mm F2.8 G SSM II)
ACCESSORIES
901
902
903
904
905
Ref. No. Part No.
Description
951
X-2189-556-1 レンズフロントキャップ
952
2-683-615-01 レンズリヤキャップ
953
A-1955-049-A レンズフード
954
4-417-296-01 レンズケース
* 955
4-471-124-01 取扱説明書 (日本語, 英語, フランス語, スペイン
語, 中国語 (簡体字))
* 955
4-471-124-11 取扱説明書 (ドイツ語, オランダ語, スウェーデン
語, イタリア語, ポルトガル語)
* 955
4-471-124-21 取扱説明書 (ウクライナ語, ロシア語, 中国語 (繁
体字), 韓国語, アラビア語)
Ref. No.
Part No.
Description
901
X-2189-556-1 Lens front cap
902
2-683-615-01
Lens rear cap
903
A-1955-049-A Lens
hood
904
4-417-296-01 Lens
case
* 905
4-471-124-01
Operating Instructions (JAPANESE, ENGLISH,
FRENCH, SPANISH, SIMPLIFIED CHINESE)
FRENCH, SPANISH, SIMPLIFIED CHINESE)
* 905
4-471-124-11
Operating Instructions (GERMAN, DUTCH, SWEDISH,
ITALIAN, PORTUGUESE)
ITALIAN, PORTUGUESE)
* 905
4-471-124-21
Operating Instructions (UKRAINIAN, RUSSIAN,
TRADITIONAL CHINESE, KOREAN, ARABIC)
TRADITIONAL CHINESE, KOREAN, ARABIC)
付属品
951
952
953
954
955
5-1
SAL70200G2 (2.8/70-200 G SSM Ⅱ) (70-200mm F2.8 G SSM II)
Note:
After repairing, perform the adjustments refer to this section.
5-1. PREPARATION
5-1-1. Equipment/Tool list
• Variable Transformer (Output voltage: 100 V AC) (Note 3)
• Camera (One of DSLR-A700, SLT-A37/A57/A58/A65/A77/A99)
•
• Camera (One of DSLR-A700, SLT-A37/A57/A58/A65/A77/A99)
•
Memory Card
• Screen (Art post paper)
•
•
Tape Measure
• Plane Mirror (For SLRs)
• Adhesive bond (B-10): J-6082-612-A
• Lens Adjustment Program (ACSSM-S-VerXXX.zip)
• Color Calculator 2
Note:
• Adhesive bond (B-10): J-6082-612-A
• Lens Adjustment Program (ACSSM-S-VerXXX.zip)
• Color Calculator 2
Note:
Acquire the Color Calculator 2 and Lens adjustment program from the each HQ.
J-1
J-2
J-3
J-4
J-5
J-6
J-7
J-8
J-9
J-10
J-11
J-12
J-13
J-14
J-15
20
30
40
50
60
70
80
90
0
10
Maximum
Aperture jig
J-6082-640-A
Aperture jig
J-6082-640-A
Chip-B for
universal wrench:
J-6082-609-2
universal wrench:
J-6082-609-2
Personal computer
(Note 1)
(Note 1)
Luminance Box
J-6082-581-A
J-6082-581-A
AE Master Lens
J-6082-597-A
J-6082-597-A
1000 mm Collimator
110V: J-6082-604-A
240V: J-6082-604-B
(Note 2)
110V: J-6082-604-A
240V: J-6082-604-B
(Note 2)
Lens Test Projector
J-6082-605-A
(Note 3)
J-6082-605-A
(Note 3)
Flange Back
Tester
J-6082-606-A
Tester
J-6082-606-A
A-Mount
Attachment
J-6082-607-A
Attachment
J-6082-607-A
Flange Back Gauge
(43.50 mm)
J-6082-608-A
(43.50 mm)
J-6082-608-A
Finished
Inspection Jig
J-6082-710-A
(Note 4)
Inspection Jig
J-6082-710-A
(Note 4)
M-Box Jig
J-6082-722-A
(Note 5)
J-6082-722-A
(Note 5)
Universal
Wrench
J-6082-609-A
Wrench
J-6082-609-A
Chip-A for
Universal Wrench
J-6082-609-1
Universal Wrench
J-6082-609-1
Chip-C for
universal wrench:
J-6082-609-3
universal wrench:
J-6082-609-3
Fig.
5-1-1
J-16
J-18
J-17
J-19
J-20
J-21
SSM Height ADJ
Harpoon Jig
J-6082-688-A
Harpoon Jig
J-6082-688-A
SSM Height
Adjustment Jig
J-6082-691-A
Adjustment Jig
J-6082-691-A
SSM Height
Adjustment
Measurement JIG
J-6082-689-A
Adjustment
Measurement JIG
J-6082-689-A
Height Adjustment
JIG (Ring)
J-6082-693-A
JIG (Ring)
J-6082-693-A
Height Adjustment
JIG (Cap)
J-6082-696-A
JIG (Cap)
J-6082-696-A
G1 Holding JIG
J-6082-671-A
J-6082-671-A
Fig.
5-1-2
Note 1:
Personal computer (PC) (Color Calculator 2 installed)
OS:
Windows
Vista/7
MEMORY:
40 MB or more recommended
Hard disk free area: 15 MB or more recommended
USB terminal:
Standard equipment
Graphics:
32,000 color or more recommended VGA monitor
Note 2:
Attach the chart to the 1000 mm Collimator as shown in Fig. 5-1-3.
Align the marks
1000 mm collimator
Chart
Fig.
5-1-3
Note 3:
Connect the variable transformer (Output voltage: AC 100 V) to the Lens Test Projector.
Note 4:
The Finished Inspection Jig II is dedicated for AC 100 V.
Note 5:
M-Box Jig is available in use for Finished Inspection Jig II (J-6082-710-A).
5. ADJUSTMENTS
Ver. 1.1 2015.07
5-2
SAL70200G2 (2.8/70-200 G SSM Ⅱ) (70-200mm F2.8 G SSM II)
5-1-2. Check/Adjustment Order
Optical System
5-2-1. Aperture
Diameter Check
OK
OK
OK
OK
OK
NG
NG
NG
OK
NG
NG
NG
NG
5-3-1. Optical Axis Check
5-5-1. Flange Back (f'F)
Check
5-6. FOCUSING
ERROR AMOUNT
CHECK
OK
NG
5-2-2. Aperture
Diameter Adjustment
5-5-2. Focus-Shift
(Focal Length)
Check/Adjustment
5-5-3. Flange Back
(f'F) Adjustment
5-4-2. Projective Resolving
Power Adjustment
(One Side Blur Adjustment)
OK
OK
OK
NG
5-4-1. Projective
Resolving Power Check
5-3-2. Optical Axis
Adjustment
5-10. FINISHED
ADJUSTMENT/
INSPECTION
Effective lens of
amount of spherical
aberration (Note)
OK
5-9. ULTRASONIC
MOTOR HEIGHT CHECK
Drive System
(Half-Completion Inspection,
Finished Inspection)
5-8-1. Focus Brush
(A Encoder Brush)
Position Checking
NG
5-8. HALF
COMPLETION
ADJUSTMENT/
INSPECTION
NG
5-8-2. MR Checking
OK
OK
NG
5-10-1. Zoom Brush
Position Checking
5-10-2. Focusing Error
Amount Adjustment
(Write
⊿SB)
END
5-9. ULTRASONIC
MOTOR HEIGHT
Adjustment
5-8-1. Focus Brush
(A Encoder Brush)
Position Adjustment
5-8-2. MR Adjustment
5-10-1. Zoom Brush
Position Adjustment
Note: Effective lens of amount of spherical aberration
5 Group Ball Frame Block
(A-1962-238-A)
(A-1962-238-A)
Replace the following lens assembly.
Click on the first or last page to see other SAL70200G2 service manuals if exist.