Sony NW-ZX100 / NW-ZX100HN Service Manual ▷ View online
NW-ZX100/ZX100HN
29
4-2-13. User specifi cation contents playback 3 (USER3)
This mode can be check the user specifi cation contents playback.
This mode is not used for the servicing. Please check in normal
mode.
Refer to “4-2-11. User specifi cation contents playback 1 (USER1)”
on page 28 for normal mode checking method.
This mode can be check the user specifi cation contents playback.
This mode is not used for the servicing. Please check in normal
mode.
Refer to “4-2-11. User specifi cation contents playback 1 (USER1)”
on page 28 for normal mode checking method.
4-2-14. Hi-Res output (HIRES)
“1kHz 0dBs 48kHz sampling L-ch/R-ch VOLUME: 30” audio sig-
nal is outputted.
“1kHz 0dBs 48kHz sampling L-ch/R-ch VOLUME: 30” audio sig-
nal is outputted.
Checking method:
1. Enter the test mode.
1. Enter the test mode.
(Refer to “1. SETTING THE TEST MODE” on page 23)
2. Press the [
v
]/[
V
] keys to select the “AUDIO”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “HIRES”.
4. Press the [
u
] key, “1kHz 0dBs 48kHz sampling L-ch/R-ch
VOLUME: 30” audio signal is outputted.
AUDIO HIRES
1kHz 0dBs L/Rch 48k
HPOUT [ VOL: 30 ]
START
Screen display
5. Press the [BACK] key, return to minor item selection screen.
4-3. Video (VIDEO)
MPTAPP (X.XX.XX)
Screen display
POWER
AUDIO
VIDEO
OTHER
CLESTE
DIREC
BLUETOOTH
NFC
USB HOST
SD
NC
SHUTDOWN
EXITTEST
LCD
USER1
USER2
USER3
USER1
USER2
USER3
4-3-1. LCD display check (LCD)
This mode can be check the screen display.
This mode can be check the screen display.
Checking method:
1. Enter the test mode.
1. Enter the test mode.
(Refer to “1. SETTING THE TEST MODE” on page 24)
2. Press the [
v
]/[
V
] keys to select the “VIDEO”, and press the
[
B
] key to select the “LCD”.
3. Press the [
u
] key, all black is displayed on the screen.
4. In this state, each time the [OPTION] or [VOL +] key is
pressed, the screen display changes in the below order.
All black (default)
Color bar (standard) Color bar
(brightness minimum)
Color bar (brightness maximum)
All red
All green All blue All white Maximum
drawing size confi rmation
diagonal gradation (red) di-
agonal gradation (green)
diagonal gradation (blue) di-
agonal gradation (white)
Maximum drawing size confi rmation:
All blue (All sides are red) is displayed. Whether red in all
sides is seen is confi rmed.
sides is seen is confi rmed.
5. In this state, each time the [
B
] key is pressed, brightness
changes in the below order.
brightness 3 (default)
brightness 4 brightness 5
brightness 1
brightness 2
6. Press the [BACK] key, return to minor item selection screen.
NW-ZX100/ZX100HN
30
4-3-2. User specifi cation contents playback 1 (USER1)
Note: Not used in this model.
4-3-3. User specifi cation contents playback 2 (USER2)
Note: Not used in this model.
4-3-4. User specifi cation contents playback 3 (USER3)
Note: Not used in this model.
4-4. Other (OTHER)
MPTAPP (X.XX.XX)
Screen display
POWER
AUDIO
VIDEO
OTHER
CLESTE
DIREC
BLUETOOTH
NFC
USB HOST
SD
NC
SHUTDOWN
EXITTEST
CLOCK
KEY
KEYNUM
FORMAT
DEST
SPSET
FWVER
NCAPCHK
KEY
KEYNUM
FORMAT
DEST
SPSET
FWVER
NCAPCHK
4-4-1. Clock check (CLOCK)
This mode can be check the movement of an internal clock.
This mode can be check the movement of an internal clock.
Checking method:
1. Enter the test mode.
1. Enter the test mode.
(Refer to “1. SETTING THE TEST MODE” on page 24)
2. Press the [
v
]/[
V
] keys to select the “OTHER”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “CLOCK”.
4. Press the [
u
] key, date and time are displayed.
“START” changes into “OK” if the movement of an internal
clock is confi rmed.
clock is confi rmed.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
OTHER CLOCK
Thu, Jul 09 2015
19:01:11.824304
19:01:11.824304
OK
Screen display
Date
Time
5. Press the [BACK] key, return to minor item selection screen.
4-4-2. Key check (KEY)
This mode can be check the operation of the keys.
This mode can be check the operation of the keys.
Checking method:
1. Enter the test mode.
1. Enter the test mode.
(Refer to “1. SETTING THE TEST MODE” on page 24)
2. Press the [
v
]/[
V
] keys to select the “OTHER”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “KEY”.
4. Press the [
u
] key, all keys are displayed.
Note: There is a display of “BT”, but there is no [BT] key on this unit.
OTHER KEY
UP
PLAY
DOWN
BT
VOL+
FF VOL-
REW
OPTION
HOLD
BACK
Screen display
5. The character corresponding to the key is selected every time
the key is pressed.
6. Slide the [HOLD] switch from ON to OFF, return to minor
item selection screen.
4-4-3. Frequency check that presses key (KEYNUM)
Note: Not used for the servicing.
If you have entered this mode by mistake, press the [BACK] key in
a state in which slide the [HOLD] switch from OFF to ON, return to
minor item selection screen.
a state in which slide the [HOLD] switch from OFF to ON, return to
minor item selection screen.
4-4-4. Format (FORMAT)
Note: Not used for the servicing.
Format the this unit from “Settings”
“Common settings” “Re-
set/Format”
“Format System Storage” in the home menu of the
normal mode when the this unit should format.
4-4-5. Destination setting (DEST)
Note: Not used for the servicing.
4-4-6. Sound pressure regulation setting (SPSET)
Note: Not used for the servicing.
NW-ZX100/ZX100HN
31
4-4-7. Firmware version check (FWVER)
This mode can be check the fi rmware version.
This mode can be check the fi rmware version.
Checking method:
1. Enter the test mode.
1. Enter the test mode.
(Refer to “1. SETTING THE TEST MODE” on page 24)
2. Press the [
v
]/[
V
] keys to select the “OTHER” and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “FWVER”.
4. Press the [
u
] key, the fi rmware version is displayed.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
OTHER FWVER
X.XX.XX
MODEL NAME
NW-ZX100
SERIAL NO
XXXXXXX
BT MAC ADR
XX-XX-XX-XX-XX-XX
Screen display
Firmware version
Model name
Serial No.
Bluetooth MAC address
5. Press the [BACK] key, return to minor item selection screen.
4-4-8. NAND capacity check (NCAPCHK)
This mode can be check the capacity of NAND fl ash memory,
present bad block, maximum bad block, and vender ID.
This mode can be check the capacity of NAND fl ash memory,
present bad block, maximum bad block, and vender ID.
Checking method:
1. Enter the test mode.
1. Enter the test mode.
(Refer to “1. SETTING THE TEST MODE” on page 24)
2. Press the [
v
]/[
V
] keys to select the “OTHER”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “NCAPCHK”.
4. Press the [
u
] key, capacity of NAND fl ash memory, present
bad block, maximum bad block, and vender ID are displayed.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
OTHER NCAPCHK
115.5GB
BADBLOCK
CUR(0)/MAX(0)
VENDOR(XxXXXXXX)
XXXXXXXX
Screen display
Capacity of NAND flash memory
Number of present bad block
(It makes an error the acquisition of
the number of bad blocks at “-1”)
Number of maximum bad block
(It makes an error the acquisition of
the vendor information at “-1”)
Vendor ID of NAND flash memory
(It makes an error the acquisition of
the number of bad blocks at “-1”)
Number of maximum bad block
(It makes an error the acquisition of
the vendor information at “-1”)
Vendor ID of NAND flash memory
Vendor name of NAND flash memory
5. Press the [BACK] key, return to minor item selection screen.
4-5. Clear stereo (CLESTE)
MPTAPP (X.XX.XX)
Screen display
POWER
AUDIO
VIDEO
OTHER
CLESTE
DIREC
BLUETOOTH
NFC
USB HOST
SD
NC
SHUTDOWN
EXITTEST
WCABLE
WOCABLE
WOCABLE
4-5-1. Clear stereo setting (With cable) (WCABLE)
Note: Not used for the servicing.
4-5-2. Clear stereo setting (No cable) (WOCABLE)
Note: Not used for the servicing.
4-6. Direct recording (DIREC)
MPTAPP (X.XX.XX)
Screen display
POWER
AUDIO
VIDEO
OTHER
CLESTE
DIREC
BLUETOOTH
NFC
USB HOST
SD
NC
SHUTDOWN
EXITTEST
OUTPUT
REC
PLAY
FORMAT
MICCHK
REC
PLAY
FORMAT
MICCHK
4-6-1. Direct recording output check (OUTPUT)
Note: Not used in this model.
4-6-2. Direct recording recording (REC)
Note: Not used in this model.
4-6-3. Direct recording playback (PLAY)
Note: Not used in this model.
4-6-4. Direct recording format select (FORMAT)
Note: Not used in this model.
4-6-5. Built-in microphone check (MICCHK)
Note: Not used in this model.
NW-ZX100/ZX100HN
32
4-7. Bluetooth (BLUETOOTH)
MPTAPP (X.XX.XX)
Screen display
POWER
AUDIO
VIDEO
OTHER
CLESTE
DIREC
BLUETOOTH
NFC
USB HOST
SD
NC
SHUTDOWN
EXITTEST
SETADR
CONNECT
SETFRQ
USER1
USER2
USER3
CONNECT
SETFRQ
USER1
USER2
USER3
4-7-1. Bluetooth address setting (SETADR)
This mode can be set the Bluetooth address setting.
This mode is not used for the servicing. Please check in normal
mode.
This mode can be set the Bluetooth address setting.
This mode is not used for the servicing. Please check in normal
mode.
Normal mode checking method:
1. By releasing the test mode, please to the normal mode.
1. By releasing the test mode, please to the normal mode.
(Refer to “2. RELEASING THE TEST MODE” on page 24)
2. Connect the PC and this unit, and copy the audio fi le (User1.
wav) to root of this unit.
Copy the file to root of this unit.
(drag and drop)
(drag and drop)
3. Disconnect the PC and this unit.
4. Press the [BACK] key for more 1.5 seconds, the home menu is
4. Press the [BACK] key for more 1.5 seconds, the home menu is
displayed.
5. Press the [
b
]/[
B
] keys to select the “Bluetooth”, and press the
[
u
] key.
6. Press the [
v
]/[
V
] keys to select the “Add Device (Pairing)”,
and press the [
u
] key.
7. Put the Bluetooth device you want to connect with in discover-
able mode.
(Refer to the operating instructions supplied with the Blue-
tooth device for details on procedures for putting it in discov-
erable mode)
tooth device for details on procedures for putting it in discov-
erable mode)
8. Select the that Bluetooth device to pairing from the list, and
press the [
u
] key.
9. Confi rm that the screen of connection completion is displayed.
10. Press the [BACK] key for more 1.5 seconds, the home menu is
10. Press the [BACK] key for more 1.5 seconds, the home menu is
displayed.
11. Press the [
b
]/[
B
] keys to select the “Music”, and press the
[
u
] key.
12. Press the [
v
]/[
V
] keys to select the “All Songs”, and press the
[
u
] key.
13. Press the [
v
]/[
V
] keys to select the copied fi le in step 2.
14. Press the [
u
] key, check that the audio fi le is playback.
4-7-2. Bluetooth connection check (CONNECT)
Connected confi rmation to the address selected in “SETADR” can
be done in this mode.
This mode is not used for the servicing. Please check in normal
mode.
Refer to “4-7-1. Bluetooth address setting (SETADR)” for normal
mode checking method.
Connected confi rmation to the address selected in “SETADR” can
be done in this mode.
This mode is not used for the servicing. Please check in normal
mode.
Refer to “4-7-1. Bluetooth address setting (SETADR)” for normal
mode checking method.
4-7-3. Bluetooth frequency setting (SETFRQ)
Note: Not used for the servicing.
4-7-4. User specifi cation contents playback 1 (USER1)
This mode can be user specifi cation contents playback to the de-
vice with the Bluetooth address described in “SETADR”.
This mode is not used for the servicing. Please check in normal
mode.
Refer to “4-7-1. Bluetooth address setting (SETADR)” for normal
mode checking method.
This mode can be user specifi cation contents playback to the de-
vice with the Bluetooth address described in “SETADR”.
This mode is not used for the servicing. Please check in normal
mode.
Refer to “4-7-1. Bluetooth address setting (SETADR)” for normal
mode checking method.
4-7-5. User specifi cation contents playback 2 (USER2)
This mode can be user specifi cation contents playback to the de-
vice with the Bluetooth address described in “SETADR”.
This mode is not used for the servicing. Please check in normal
mode.
Refer to “4-7-1. Bluetooth address setting (SETADR)” for normal
mode checking method.
This mode can be user specifi cation contents playback to the de-
vice with the Bluetooth address described in “SETADR”.
This mode is not used for the servicing. Please check in normal
mode.
Refer to “4-7-1. Bluetooth address setting (SETADR)” for normal
mode checking method.
Click on the first or last page to see other NW-ZX100 / NW-ZX100HN service manuals if exist.