Sharp XV-Z3000 (serv.man2) User Manual / Operation Manual ▷ View online
Connections
23
Connecting to Video Equipment
Before connecting, ensure that the power cord of the projector is unplugged from the AC
outlet and turn off the devices to be connected. After making all connections, turn on the
projector first and then the other devices.
outlet and turn off the devices to be connected. After making all connections, turn on the
projector first and then the other devices.
When connecting the component video equipment to the component input termi-
nal on the projector (INPUT1 or INPUT2)
nal on the projector (INPUT1 or INPUT2)
Component cable
(commercially available)
(commercially available)
To component output
(Y, C
(Y, C
B
/P
B
, C
R
/P
R
) terminal
To INPUT1 terminal
DVD, etc.
XV-Z3000_EN_g
06.1.10, 3:14 PM
23
24
To video output terminal
When connecting to equipment with video output terminal (INPUT4)
Video cable
To INPUT4 terminal
DVD, etc.
When connecting to equipment with S-video output terminal (INPUT3)
To S-video output terminal
S-video cable
(commercially available)
(commercially available)
To INPUT3 terminal
DVD, etc.
Connecting to Video Equipment (Continued)
Supplied
accessory
Video cable
XV-Z3000_EN_g
06.1.10, 3:14 PM
24
Connections
25
When connecting the component video equipment to the computer-RGB/
component input terminal on the projector (INPUT5)
component input terminal on the projector (INPUT5)
DVD, etc.
To component output
(Y, C
(Y, C
B
/P
B
, C
R
/P
R
) terminal
To INPUT5 terminal
3 RCA to 15-pin D-sub cable
(optional accessory: AN-C3CP2)
(optional accessory: AN-C3CP2)
When connecting to equipment with HDMI output teminal (INPUT6)
HDMI is a new specialized interface capable of delivering a video and audio signal to
the terminal using just one cable. Since this projector does not support an audio signal
by itself, use an amplifier or other audio device.
For video connection, use a cable that conforms to HDMI standards. Using cables that
do not conform to HDMI standards may result in a malfunction.
the terminal using just one cable. Since this projector does not support an audio signal
by itself, use an amplifier or other audio device.
For video connection, use a cable that conforms to HDMI standards. Using cables that
do not conform to HDMI standards may result in a malfunction.
HDMI compatible device
To HDMI output terminal
To INPUT6 terminal
HDMI cable (type A)
(commercially available)
(commercially available)
Note
• HDMI (High Definition Multimedia Interface) is a digital AV interface that can deliver a high-defini-
tion video signal, multi-channel audio signal, and bi-directional control signal all in just one cable.
• Because it is compatible with the HDCP (High-bandwidth Digital Content Protection) system, the
digital video signal does not degrade when transmitted, and a high-quality image with a simple
connection can be enjoyed.
connection can be enjoyed.
• When a DVI to HDMI conversion cable is connected to the HDMI terminal, a proper picture may not
be displayable.
XV-Z3000_EN_g
06.1.10, 3:14 PM
25
26
Connecting to a Computer
To RGB output terminal
RGB cable
(commercially available)
(commercially available)
When connecting a computer, ensure that it is the last device to be turned on after all the
connections are made.
connections are made.
Ensure that you have read the operation manuals of the devices to be connected before making
connections.
connections.
• See page 59 “Computer Compatibility Chart” for a list of computer signals compatible with the projec-
tor. Use with computer signals other than those listed may cause some of the functions to not work.
• A Macintosh adaptor may be required for use with some Macintosh computers. Contact your near-
est Macintosh Dealer.
• Depending on the computer you are using, an image may not be projected unless the
computer’s external output port is switched on. (e.g. Press “Fn” and “F5” keys simultaneously
when using a SHARP notebook computer). Refer to the specific instructions in your computer's
operation manual to enable your computer’s external output port.
when using a SHARP notebook computer). Refer to the specific instructions in your computer's
operation manual to enable your computer’s external output port.
Note
To INPUT5 terminal
Supplied
accessory
Computer
XV-Z3000_EN_g
06.1.10, 3:14 PM
26
Click on the first or last page to see other XV-Z3000 (serv.man2) service manuals if exist.