Sharp XV-Z201E (serv.man31) User Manual / Operation Manual ▷ View online
Connections and Setup
-15
Connecting to Video Equipment
Connecting to Video
Equipment Using an
S-video Cable (INPUT 3)
Equipment Using an
S-video Cable (INPUT 3)
Using an S-video cable, a VCR, DVD player or
other video equipment can be connected to
INPUT 3 input terminal.
other video equipment can be connected to
INPUT 3 input terminal.
1
Connect an S-video cable to
the projector.
the projector.
2
Connect the S-video cable to
the video equipment.
the video equipment.
Note
• The INPUT 3 (S-VIDEO) terminal uses a
video signal system in which the picture
is separated into color and luminance sig-
nals to realize a higher-quality image. To
view a higher-quality image, use a com-
mercially available S-video cable to con-
nect the INPUT 3 terminal on the projec-
tor and the S-video output terminal on the
video equipment.
is separated into color and luminance sig-
nals to realize a higher-quality image. To
view a higher-quality image, use a com-
mercially available S-video cable to con-
nect the INPUT 3 terminal on the projec-
tor and the S-video output terminal on the
video equipment.
S-video cable
(commercially available)
(commercially available)
To S-video output terminal
To INPUT 3 terminal
VCR or other video equipment
XV_Z201E_E_p13_24.p65
03.10.30, 12:17AM
15
Connecting to Video
Equipment Using a
Composite Video Cable
(INPUT 4)
Equipment Using a
Composite Video Cable
(INPUT 4)
Using a composite video cable, a VCR, DVD
player or other video equipment can be con-
nected to INPUT 4 input terminal.
player or other video equipment can be con-
nected to INPUT 4 input terminal.
1
Connect a composite video
cable to the projector.
cable to the projector.
2
Connect the composite video
cable to the video equipment.
cable to the video equipment.
To INPUT 4 terminal
VCR or other video equipment
To video output terminal
Composite video cable
-16
Connecting the Projector to Other Devices
XV_Z201E_E_p13_24.p65
03.10.30, 12:17AM
16
Connections and Setup
-17
Connecting to
Component Video
Equipment Using a
Component Cable
(INPUT 1)
Component Video
Equipment Using a
Component Cable
(INPUT 1)
Use a component cable when connecting com-
ponent video equipment such as DVD players
and DTV decoders to INPUT 1 terminals.
ponent video equipment such as DVD players
and DTV decoders to INPUT 1 terminals.
1
Connect a component cable to
the projector.
the projector.
2
Connect the above cable to the
component video equipment.
component video equipment.
Note
• Make sure to turn both the projector and
the video equipment off before connect-
ing.
ing.
Connecting to a DVD Player and DTV Decoder
To analog component
output terminal
output terminal
To INPUT 1 terminals
DVD player or
DTV decoder
DTV decoder
Component cable
(commercially available)
XV_Z201E_E_p13_24.p65
03.10.30, 12:17AM
17
Connecting to Compo-
nent Video Equipment
Using a 3 RCA to 15-pin
D-sub Cable and the
DVI to 15-pin D-sub
Adaptor (INPUT 2)
nent Video Equipment
Using a 3 RCA to 15-pin
D-sub Cable and the
DVI to 15-pin D-sub
Adaptor (INPUT 2)
Use a 3 RCA to 15-pin D-sub cable and the
DVI to 15-pin D-sub adaptor when connecting
component video equipment such as DVD
players and DTV decoders to INPUT 2 termi-
nal.
DVI to 15-pin D-sub adaptor when connecting
component video equipment such as DVD
players and DTV decoders to INPUT 2 termi-
nal.
1
Connect a DVI to 15-pin D-sub
adaptor to the projector.
adaptor to the projector.
2
Connect a 3 RCA to 15-pin D-
sub cable to the above adaptor.
sub cable to the above adaptor.
• Secure the connectors by tightening the
thumbscrews.
3
Connect the above cable to the
video equipment.
video equipment.
Note
• When connecting this projector to com-
ponent output terminal of the DTV de-
coder, select “Component” for “Signal
Type” on the OSD menu or press
coder, select “Component” for “Signal
Type” on the OSD menu or press
on
the remote control. (See page 52.)
• Make sure to turn both the projector and
the video equipment off before connect-
ing.
ing.
3 RCA to 15-pin
D-sub cable
Type: AN-C3CP
(3.0 m)
D-sub cable
Type: AN-C3CP
(3.0 m)
DVI to 15-pin
D-sub adaptor
Type: AN-A1DV
(20 cm)
D-sub adaptor
Type: AN-A1DV
(20 cm)
Optional
accessories
accessories
To analog component
output terminal
To INPUT 2 terminal
DVD player or
DTV decoder
DTV decoder
DVI to 15-pin
D-sub adaptor
(sold separately)
D-sub adaptor
(sold separately)
3 RCA to 15-pin
D-sub cable
(sold separately)
D-sub cable
(sold separately)
Connecting the Projector to Other Devices
-18
XV_Z201E_E_p13_24.p65
03.10.30, 12:17AM
18
Click on the first or last page to see other XV-Z201E (serv.man31) service manuals if exist.