Sharp XV-Z201E (serv.man31) User Manual / Operation Manual ▷ View online
Basic Operation
-31
3
Press
,
,
,
or
on the remote control or
on
the projector to select the IN-
PUT mode.
PUT mode.
• After pressing
once on the projector,
use
to select the desired input mode.
Note
• When no signal is received, “NO SIG-
NAL” will be displayed. When a sig-
nal that the projector is not preset to
receive is received, “NOT REG.” will
be displayed.
nal that the projector is not preset to
receive is received, “NOT REG.” will
be displayed.
About the INPUT modes
Used for projecting im-
ages from equipment
connected to INPUT 1
terminals.
ages from equipment
connected to INPUT 1
terminals.
Used for projecting im-
ages from equipment
connected to INPUT 2
terminal.
ages from equipment
connected to INPUT 2
terminal.
Used for projecting im-
ages from equipment
connected to INPUT 3
terminal.
ages from equipment
connected to INPUT 3
terminal.
Used for projecting im-
ages from equipment
connected to INPUT 4
terminal.
ages from equipment
connected to INPUT 4
terminal.
Used for projecting
images from equipment
connected to DIGITAL
INPUT terminal.
images from equipment
connected to DIGITAL
INPUT terminal.
INPUT 1
(Compo-
nent)
(Compo-
nent)
INPUT 2
(Compo-
nent/RGB)
(Compo-
nent/RGB)
INPUT 3
(S-Video)
(S-Video)
INPUT 4
(Video)
(Video)
DIGITAL
On-screen Display
Selecting the On-
screen Display Lan-
guage
screen Display Lan-
guage
English is the preset language for the On-
screen Display; however, this can be changed
to German, Spanish, Dutch, French, Italian,
Swedish, Portuguese, Chinese, Korean or
Japanese.
screen Display; however, this can be changed
to German, Spanish, Dutch, French, Italian,
Swedish, Portuguese, Chinese, Korean or
Japanese.
Display the “Language” menu and se-
lect the desired Language.
➝For operating the menu screen, see
pages 38 to 41.
lect the desired Language.
➝For operating the menu screen, see
pages 38 to 41.
INPUT 1 Mode
INPUT 2 Mode
INPUT 3 Mode
INPUT 4 Mode
DIGITAL INPUT Mode
"On-screen Display (Example)
XV_Z201E_E_p29_43.p65
03.10.30, 12:17AM
31
-32
-32
Image Projection
Turning the Power off
1
Press
on the remote con-
trol or
on the projector,
then press
or
again
while the confirmation message
is displayed, to put the projec-
tor into the standby mode.
is displayed, to put the projec-
tor into the standby mode.
• A dimly-lit screen is displayed for a
short time to reduce lamp damage.
Note
• If you accidentally pressed
and do not want to put the projector
into the standby mode, wait until the
confirmation message disappears.
into the standby mode, wait until the
confirmation message disappears.
2
Unplug the power cord from the
AC outlet after the cooling fan
stops.
AC outlet after the cooling fan
stops.
Info
• Do not unplug the power cord dur-
ing projection or cooling fan opera-
tion. This can cause damage due
to the rise in internal temperature,
as the cooling fan also stops.
tion. This can cause damage due
to the rise in internal temperature,
as the cooling fan also stops.
• When connected to equipment such
as an amplifier, be sure to turn off
the power to the equipment con-
nected first and then to the projec-
tor.
the power to the equipment con-
nected first and then to the projec-
tor.
STANDBY button
STANDBY button
XV_Z201E_E_p29_43.p65
03.10.30, 12:17AM
32
Basic Operation
-33
Horizontal Keystone Correction
Vertical Keystone Correction
Keystone Correction
This function can be used to adjust the Key-
stone settings.
stone settings.
Note
• For details about using the menu screen,
see pages 38 to 41.
1
Press
on the projector or
on the remote control.
2
Press
/
to select “H Key-
stone” or “V Keystone”.
3
Press
/
to move the mark
on the selected adjustment
item to the desired setting.
item to the desired setting.
Note
• Straight lines and the edges of the
displayed image may appear
jagged, when adjusting the Key-
stone setting.
jagged, when adjusting the Key-
stone setting.
• When adjusting “H Keystone” and
“V Keystone” at the same time, the
values of adjustable angles for each
setting become smaller.
values of adjustable angles for each
setting become smaller.
• The adjustable value of the “V Key-
stone” becomes extremely small
when “H Keystone” is made to be
the maximum value.
when “H Keystone” is made to be
the maximum value.
• Keystone correction is disabled
while the picture mode is set to
“SMART STRETCH”. (See page
35.)
“SMART STRETCH”. (See page
35.)
4
To return to the normal screen,
press
again.
KEYSTONE button
", ',\, |
buttons
buttons
KEYSTONE button
", ',\, |
buttons
buttons
Selected Item
Description
H Keystone
Horizontally adjusts the keystone settings.
V Keystone
Vertically adjusts the keystone settings.
Reset
V and H Keystone adjustments are
returned to the factory preset settings.
returned to the factory preset settings.
XV_Z201E_E_p29_43.p65
03.10.30, 12:18AM
33
-34
Image Projection
-34
Placement of the Pro-
jected Image Using the
Keystone Correction
jected Image Using the
Keystone Correction
Place the projector at a distance from the
screen that allows images to be projected onto
the screen by referring to “Adjusting the Pro-
jection Distance” on pages 26 and 27.
screen that allows images to be projected onto
the screen by referring to “Adjusting the Pro-
jection Distance” on pages 26 and 27.
1
Project the test pattern of the
Keystone correction function
onto the screen. Rotate the Fo-
cus ring until the image on the
screen comes into focus. (See
page 25.)
Keystone correction function
onto the screen. Rotate the Fo-
cus ring until the image on the
screen comes into focus. (See
page 25.)
2
Change the projection angle
using the Swivel Stand to prop-
erly project images onto the
screen. (See page 24).
using the Swivel Stand to prop-
erly project images onto the
screen. (See page 24).
3
Align the edge of the screen
closest to the projector with
the test pattern by adjusting
the zoom and the Swivel Stand.
(See pages 24 and 25.)
closest to the projector with
the test pattern by adjusting
the zoom and the Swivel Stand.
(See pages 24 and 25.)
4
Adjust the Keystone function
so that the size of the projected
image matches the screen
size. (See page 33.)
so that the size of the projected
image matches the screen
size. (See page 33.)
5
Align the image on the screen
by adjusting the zoom function
and the Swivel Stand.
by adjusting the zoom function
and the Swivel Stand.
6
Adjust the focus so that the
projected image is in focus at
the centre of the screen. (See
page 25.)
projected image is in focus at
the centre of the screen. (See
page 25.)
Note
• The aspect ratio of the projected image
shifts slightly when the lens shift is at a
position other than the top position.
position other than the top position.
• The aspect ratio of the projected image
also shifts slightly when the “H Keystone”
and “V Keystone” functions are adjusted
simultaneously.
and “V Keystone” functions are adjusted
simultaneously.
: Screen area
XV_Z201E_E_p29_43.p65
03.10.30, 12:18AM
34
Click on the first or last page to see other XV-Z201E (serv.man31) service manuals if exist.