Sharp XV-Z201E (serv.man31) User Manual / Operation Manual ▷ View online
Connections and Setup
-27
90
°
90
°
90
°
90
°
Upper and Lower Lens Shift Position
• This projector is equipped with a lens shift function that lets you adjust the projection height.
• Adjust the projection height to match the setup configuration.
• The screen can be moved maximum the length of one screen vertically using the lens shift.
• Adjust the projection height to match the setup configuration.
• The screen can be moved maximum the length of one screen vertically using the lens shift.
Note
• Optimal image quality is produced with the projector positioned perpendicular to the screen with all feet flat and level.
Tilting or angling the projector will reduce the effectiveness of the lens shift function.
Screen size: 254 cm
Aspect ratio: 16:9
Aspect ratio: 16:9
Screen
Upper and Lower Lens Shift Position (Ceiling Mount)
When the projector is in the inverted position, use the upper edge of the screen as the base line,
and exchange the lower and upper lens shift values.
and exchange the lower and upper lens shift values.
Screen
Lower lens shift position
(High mount setup)
(High mount setup)
Upper lens shift position
(Desktop setup)
(Desktop setup)
Lens centre
Lens centre
Screen size: 254 cm
Aspect ratio: 16:9
Aspect ratio: 16:9
Lower edge of screen (White portion) =
Standard (0) point
Standard (0) point
XV_Z201E_E_p25_28.p65
03.10.30, 12:17AM
27
-28
Rear Projection
■ Place a translucent screen between the projector and the au-
dience.
■ Use the projector’s menu screen to reverse the projected im-
age. (See page 56
for use of this func-
tion.)
for use of this func-
tion.)
Note
• Optimal image quality can be achieved when the projector is
positioned perpendicular to the screen with all feet flat and lev-
eled.
eled.
Projection using a mirror
■ Place a mirror (normal flat type) in front of the lens.
Info
• When using a mirror, be sure to carefully position both the
projector and the mirror so the light does not shine into the
eyes of the audience.
eyes of the audience.
Ceiling-mount setup
■ It is recommended that you use the optional Sharp ceiling-mount
bracket for this installation.
■ Before mounting the
projector, remove the
Swivel Stand. (See pages
24 and 25 for removing and
attaching the Swivel Stand.)
Swivel Stand. (See pages
24 and 25 for removing and
attaching the Swivel Stand.)
■ Before mounting the
projector, contact your
nearest Sharp Authorised
Projector Dealer or Service
Centre to obtain the recommended ceiling-mount bracket (sold
separately). (AN-TK202 ceiling-mount bracket, AN-TK201
extension tube, AN-60KT ceiling adaptors for AN-TK202 or AN-
TK201)
nearest Sharp Authorised
Projector Dealer or Service
Centre to obtain the recommended ceiling-mount bracket (sold
separately). (AN-TK202 ceiling-mount bracket, AN-TK201
extension tube, AN-60KT ceiling adaptors for AN-TK202 or AN-
TK201)
■ When the projector is in the inverted position, use the upper
edge of the screen as the base line.
■ Use the projector’s menu screen to select the appropriate pro-
jection mode. (See page 56 for use of this function.)
When using the default setting.
▼On-screen Display
Image Projection
The image is reversed.
When using the default setting.
▼On-screen Display
The image is inverted.
Setup
XV_Z201E_E_p25_28.p65
03.10.30, 12:17AM
28
Basic Operation
Basic Operation
XV_Z201E_E_p29_43.p65
03.10.30, 12:17AM
29
-30
Image Projection
-30
Basic Procedure
Connect the required external equipment to
the projector before operating the following
procedures.
the projector before operating the following
procedures.
Info
• The language preset at the factory is English.
If you want to change the on-screen display
to another language, reset the language ac-
cording to the procedure on page 31.
to another language, reset the language ac-
cording to the procedure on page 31.
1
Plug the power cord into the
wall outlet.
wall outlet.
• The POWER indicator illuminates red,
and the projector enters standby mode.
2
Press
on the remote control
or
on the projector.
• The blinking green LAMP indicator
shows that the lamp is warming up.
Wait until the indicator stops blinking
before operating the projector.
Wait until the indicator stops blinking
before operating the projector.
• If the power is turned off and then im-
mediately turned on again, it may take
a short while before the lamp turns on.
a short while before the lamp turns on.
Note
• After the projector is unpacked and
turned on for the first time, a slight
odour may be emitted from the ex-
haust ventilative holes. This odor will
soon disappear with use.
odour may be emitted from the ex-
haust ventilative holes. This odor will
soon disappear with use.
When the power is on, the LAMP in-
dicator illuminates, indicating the sta-
tus of the lamp.
Green: Lamp is ready.
Green blinking: Warming up. / Cooling
down.
Red: Change the lamp.
dicator illuminates, indicating the sta-
tus of the lamp.
Green: Lamp is ready.
Green blinking: Warming up. / Cooling
down.
Red: Change the lamp.
TEMP.
LAMP
POWER
LAMP indicator
POWER indicator
ON button
INPUT button
ON button
INPUT buttons
XV_Z201E_E_p29_43.p65
03.10.30, 12:17AM
30
Click on the first or last page to see other XV-Z201E (serv.man31) service manuals if exist.