Sharp XV-Z201E (serv.man31) User Manual / Operation Manual ▷ View online
Introduction
-7
The power indicator
illuminates green.
illuminates green.
In this page, connection of the projector and the video equipment is explained as an example
for the procedure from setup to projection. Refer to each page for details.
for the procedure from setup to projection. Refer to each page for details.
Quick Guide
Required equipments
Video cable
Projector
Power cord
1. Place the projector facing a wall or a screen.
2. Connect to video equipment. (Page 16)
6. Turn the projector on using
on the remote
control. (Page 30)
3. Connect the output terminal of the video equip-
ment to the input terminal of the audio equip-
ment using an audio cable.
ment using an audio cable.
4. Plug the power cord into the AC socket of the
projector and into the wall outlet. (Page 14)
5. Remove the lens cap from the lens.
7. Press
on the remote control to select the
INPUT 4 mode. (Page 31)
"On-screen Display
8. Turn on the video equipment.
To INPUT 4
terminal
terminal
To video out
put terminal
put terminal
INPUT 4 button
ON button
ON
Video equipment
Video cable
○○○○○○
○○○○○○○
9. Play the video.
10.Adjust the image size, image position and the
focus. (Page 25)
Note
•
This projector can also be connected to a computer
as well as to video equipment. (Page 21)
as well as to video equipment. (Page 21)
Power cord
Lens cap
Adjust the height of the image
by rotating the lens shift dial.
by rotating the lens shift dial.
Adjust the focus by
rotating the focus ring.
rotating the focus ring.
Adjust the zooming by
moving the zoom knob.
moving the zoom knob.
Remote control
• Insert the batteries.
• Insert the batteries.
(Page 11)
XV_Z201E_E_p04_12.p65
03.10.30, 12:16AM
7
-8
Projector (Front and Top View)
30
58
58
POWER indicator
6
Exhaust ventilative hole
LAMP indicator
TEMPERATURE
WARNING indicator
WARNING indicator
39
ADJUSTMENT buttons
(ƒ/∂/ß/©)
39
UNDO button
38
MENU button
35
RESIZE button
31
INPUT button
24
Swivel Stand
LOCK/UNLOCK lever
LOCK/UNLOCK lever
11
Remote control sensor
Lens cap
Zoom knob
25
Exhaust ventilative hole
6
Focus ring
25
25
Lens shift dial
39
ENTER button
33
KEYSTONE button
ON button
30
STANDBY
button
button
32
47
PICTURE SETTING button
Attaching the Lens Cap
The lens cap can be attached to the
projector using commercially
available straps (for cellular phones
etc.), as shown in the figure.
The lens cap can be attached to the
projector using commercially
available straps (for cellular phones
etc.), as shown in the figure.
Projector (Side and Rear View)
Numbers in
refer to the main pages in this operation manual where the topic is explained.
Part Names
XV_Z201E_E_p04_12.p65
03.10.30, 12:16AM
8
Introduction
-9
Projector (Rear View)
Using the Terminal Cover
When the projector is used on a desktop, high mounted or ceiling mounted, attach the terminal cover (supplied)
to hide the connecting cables.
When the projector is used on a desktop, high mounted or ceiling mounted, attach the terminal cover (supplied)
to hide the connecting cables.
17
16
62
Intake ventilative hole
AC socket
Intake ventilative hole
62
18
INPUT 2/DIGITAL INPUT
terminal
INPUT 1 COMPONENT
terminals (RCA)
INPUT 4 VIDEO terminal (RCA)
20
DIGITAL INPUT
TYPE switch
TYPE switch
15
INPUT 3 S-VIDEO terminal
(4-pin Mini DIN)
23
RS-232C terminal
(9-pin D-sub)
(9-pin D-sub)
11
Remote control sensor
14
Attaching the Terminal
Cover
1 Align with the tabs on
Cover
1 Align with the tabs on
the projector and
then press the
terminal cover in the
direction of the arrow.
then press the
terminal cover in the
direction of the arrow.
2 Tighten the two
screws on the bottom
of the projector.
of the projector.
Removing the Terminal
Cover
1 Loosen the two screws
Cover
1 Loosen the two screws
on the bottom of the
projector.
projector.
2 Raise the terminal cover
and pull it out in the
direction of the arrow.
direction of the arrow.
2 Tighten the screws
1 Loosen the screws
1
2
XV_Z201E_E_p04_12.p65
03.10.30, 12:16AM
9
-10
Part Names
Remote Control (Front View)
Remote Control (Top View)
FREEZE button
32
31
50
52
39
39
38
39
31
31
31
31
35
47
35
STANDBY button
ENTER button
33
KEYSTONE button
UNDO button
INPUT 1 button
INPUT 2 button
INPUT 4 button
AUTO SYNC button
RESIZE button
PICTURE SETTING button
MENU button
30
ON button
ADJUSTMENT buttons
(ƒ/∂/ß/©)
(ƒ/∂/ß/©)
INPUT 3 button
DIGITAL INPUT button
RGB/COMP. button
Remote control signal transmitters
XV_Z201E_E_p04_12.p65
03.10.30, 12:16AM
10
Click on the first or last page to see other XV-Z201E (serv.man31) service manuals if exist.