DOWNLOAD Sharp XV-Z201E (serv.man31) Service Manual ↓ Size: 7.67 MB | Pages: 73 in PDF or view online for FREE

Optional
accessory

DVI to 15-pin D-sub adaptor
Type: AN-A1DV (20 cm)

• Secure the connectors by tightening the

thumbscrews.

Note

• When connecting this projector to DVI out-

put of the DTV decoder, select “RGB” for
“Signal Type” on the OSD menu or press

on the remote control. (See page 52.)

To RGB output terminal

RGB cable
(commercially 
available)

To INPUT 2 terminal

DVD player or
DTV decoder

DVI to 15-pin
D-sub adaptor
(sold separately)

XV_Z201E_E_p13_24.p65

03.10.30, 12:17AM

19

Optional
accessory

DVI cable
Type: AN-C3DV

(3.0 m)

• Secure the connectors by tightening the

thumbscrews.

Note

• Select DIGITAL INPUT mode when con-

necting to video equipment with the digi-
tal output terminal. (See page 31.)

• Make sure to turn both the projector and

the video equipment off before switching
the  “DIGITAL INPUT TYPE” switch and
connecting.

To DIGITAL INPUT 
terminal

DIGITAL INPUT 
TYPE switch

DVD player or
DTV decoder

To DVI digital output terminal

DVI cable
(sold separately)

XV_Z201E_E_p13_24.p65

03.10.30, 12:17AM

20

To INPUT 2 terminal

Notebook computer

To RGB output terminal

RGB cable
(commercially available)

DVI to 15-pin D-sub adaptor

(sold separately)

Optional
accessory

DVI to 15-pin D-sub adaptor
Type: AN-A1DV (20 cm)

• Secure the connectors by tightening the

thumbscrews.

Note

• Refer to “Computer Compatibility Chart” on

page  66 for a list of computer signals
compatible with the projector. Use with
computer signals other than those listed may
cause some of the functions not to work.

• When connecting the projector to a computer

in this way, select “RGB” for “Signal Type” on
the OSD menu or press 

 on the remote

control. (See page 52.)

• A Macintosh adaptor may be required for use

with some Macintosh computers. Contact your
nearest Sharp Authorised Projector Dealer or
Service Centre.

• Depending on the computer you are using, an

image may not be projected unless the signal
output setting of the computer is switched to
the external output. Refer to the computer op-
eration manual for switching the computer sig-
nal output settings.

■ Connect the thumbscrew cable making sure that it fits cor-

rectly into the terminal. Then, firmly secure the connec-
tors by tightening the screws on both sides of the plug.

■ Do not remove the ferrite core attached to the RGB cable.

XV_Z201E_E_p13_24.p65

03.10.30, 12:17AM

21

• Secure the connectors by tightening the

thumbscrews.

Note

• Select DIGITAL INPUT mode when con-

necting to digital output terminal of the
computer. (See page 31.)

• Before switching the “DIGITAL INPUT

TYPE” switch and connecting, be sure to
unplug the power cord of the projector
from the AC outlet and turn off the com-
puter to be connected. After making all
connections, turn on the projector and
then the computer.

• Be sure that the computer is the last de-

vice to be turned on after all the connec-
tions are made.

■ This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC

compatible computer will communicate their setting requirements, allowing for quick and easy setup.

■ Before using the “Plug and Play” function, be sure to turn on the projector first and the con-

Note

• The DDC “Plug and Play” function of this projector operates only when used in conjunction with a VESA

DDC compatible computer.

Optional
accessory

DVI cable
Type: AN-C3DV

(3.0 m)

To DIGITAL INPUT
terminal

To DVI digital output terminal

DVI cable
(sold separately)

Desktop computer

DIGITAL INPUT 
TYPE switch

XV_Z201E_E_p13_24.p65

03.10.30, 12:17AM

22