Sharp XV-Z201E (serv.man31) User Manual / Operation Manual ▷ View online
Connections and Setup
-23
Controlling the
Projector Using an
RS-232C Cable
Projector Using an
RS-232C Cable
When the RS-232C terminal on the projector
is connected to a computer with an RS-232C
cable (null modem, cross type, commercially
available), the computer can be used to con-
trol the projector and check the status of the
projector. See page 65 for details.
is connected to a computer with an RS-232C
cable (null modem, cross type, commercially
available), the computer can be used to con-
trol the projector and check the status of the
projector. See page 65 for details.
1
Connect an RS-232C cable to
the projector.
the projector.
2
Connect the above cable to the
computer.
computer.
Note
• Do not connect or disconnect an RS-232C
cable to or from the computer while it is
on. This may damage your computer.
on. This may damage your computer.
• The RS-232C function may not operate if
your computer terminal is not correctly set
up. Refer to the operation manual of the
computer for details.
up. Refer to the operation manual of the
computer for details.
• Refer to “Computer Compatibility Chart”
on page 66 for a list of computer signals
compatible with the projector. Use with
computer signals other than those listed
may cause some of the functions not to
work.
compatible with the projector. Use with
computer signals other than those listed
may cause some of the functions not to
work.
Controlling the Projector by a Computer
Desktop computer
To RS-232C terminal
To RS-232C terminal
RS-232C cable
(commercially available)
XV_Z201E_E_p13_24.p65
03.10.30, 12:17AM
23
-24
1
2
3
Setup
Caution
• Do not hold the lens when lifting, lower-
ing or rotating the projector.
• When lowering the projector, be careful not
to get your fingers caught in the area be-
tween the Swivel Stand and the projector.
tween the Swivel Stand and the projector.
Note
• When the height or direction of the pro-
jector is adjusted, the image may become
distorted (keystoned), depending on the
relative positions of the projector and the
screen. See page 33 for details on the
keystone correction.
distorted (keystoned), depending on the
relative positions of the projector and the
screen. See page 33 for details on the
keystone correction.
Using the Swivel Stand
You can adjust the angle and direction of the
projected image by using the Swivel Stand.
projected image by using the Swivel Stand.
1
Unlock the lever on the Swivel
Stand.
Stand.
2
Adjust the angle and direction
of the projected image as you
want by lifting up the projec-
tor and rotating the projector
on the Swivel Stand.
of the projected image as you
want by lifting up the projec-
tor and rotating the projector
on the Swivel Stand.
3
Lock the lever on the Swivel
Stand.
Stand.
Removing the Swivel
Stand
Stand
1
Lift the projector (2 ) with
pressing the removing-stand
button on the back of the pro-
jector (1).
pressing the removing-stand
button on the back of the pro-
jector (1).
Adjustable up to
±10° from the
standard position.
±10° from the
standard position.
Adjustable up to
±25° from the
standard position.
±25° from the
standard position.
Adjustable up to
±3° from the
standard position.
±3° from the
standard position.
Swivel Stand
LOCK/UNLOCK
lever
LOCK/UNLOCK
lever
1
2
Removing-
stand button
stand button
-24
XV_Z201E_E_p13_24.p65
03.10.30, 12:17AM
24
Connections and Setup
-25
Attaching the Swivel
Stand
Stand
1
Align the tabs on the front bot-
tom of the projector (1).
tom of the projector (1).
2
While holding down the button
(2), place the projector onto
the Swivel Stand (3) to attach.
(2), place the projector onto
the Swivel Stand (3) to attach.
3
Press the projector down
firmly to attach it to the Swivel
Stand to make sure it is se-
curely attached to the Swivel
Stand.
firmly to attach it to the Swivel
Stand to make sure it is se-
curely attached to the Swivel
Stand.
Focusing and Zooming
The picture can be focused and zoomed in or
out by using the Focus ring and the Zoom
knob.
out by using the Focus ring and the Zoom
knob.
1
Rotate the Focus ring until the
image on the screen comes
into focus.
image on the screen comes
into focus.
2
Slide the Zoom knob. The im-
age can be adjusted to the de-
sired size within the zoom
range.
age can be adjusted to the de-
sired size within the zoom
range.
Using the Lens Shift
The picture can be adjusted within the shift
range of the lens by rotating the lens shift dial
on the top of the projector using your finger.
range of the lens by rotating the lens shift dial
on the top of the projector using your finger.
1
3
2
Focus ring
Zoom knob
Lens shift dial
UP
DOWN
Projected Image
XV_Z201E_E_p25_28.p65
03.10.30, 12:17AM
25
-26
Adjusting the Projection Distance
Setup
• Refer to pages 33 and 34 about the function of Keystone correction and placement of projector using the
correction.
• Decide the placement of the projector referring to the figures on the table and the diagram below
according to the size of your screen and input signal.
Centre of the screen
(a)
(b)
(c)
(d)
(f)
Placement range
(e)
±10°
(a) Maximum projection distance
(b) Minimum projection distance
(c) Horizontal placement range when projection distance is maximum.
(d) Horizontal placement range when projection distance is minimum.
(e) Vertical placement range when projection distance is maximum.
( f ) Vertical placement range when projection distance is minimum.
(b) Minimum projection distance
(c) Horizontal placement range when projection distance is maximum.
(d) Horizontal placement range when projection distance is minimum.
(e) Vertical placement range when projection distance is maximum.
( f ) Vertical placement range when projection distance is minimum.
Note
• The aspect ratio of the projected image shifts slightly when
the lens shift is at a position other than the top position.
• The aspect ratio of the projected image also shifts slightly
when the “H Keystone” and “V Keystone” functions are
adjusted simultaneously.
adjusted simultaneously.
• When adjusting “H Keystone” and “V Keystone” at the same
time, the values of adjustable angles for each setting
become smaller.
become smaller.
• Keystone correction cannot be applied to On-screen
Display.
• When Keystone correction is applied, the resolution of image
can be deteriorated to some extent.
• There are errors of
±3% in the formulas below.
3
4
: Screen area
: Picture area
: Picture area
9
16
: Picture area
When using a wide
screen (16:9)
In case of displaying
the 16:9 picture on the
whole of the 16:9
screen.
screen (16:9)
In case of displaying
the 16:9 picture on the
whole of the 16:9
screen.
When using a normal
screen (4:3)
In case of setting the
16:9 picture to the full
horizontal width of the
4:3 screen.
screen (4:3)
In case of setting the
16:9 picture to the full
horizontal width of the
4:3 screen.
Screen size
(16:9)(x)
Projection distance and Keystone correction
Maximum projection distance
Minimum projection distance
Diag.
Projection
distance (a)
Composite, S-video
480
I
/P, 1080
I
720P
RGB
Vertical
placement range
(e)
Projection
distance (b)
Composite, S-video
480
I
/P, 1080
I
720P
RGB
Vertical
placement range
(f)
Horizontal Placement range (d)
Horizontal Placement range (c)
Screen size
(4:3)(x)
Projection distance and Keystone correction
Maximum projection distance
Minimum projection distance
Diag.
Horizontal Placement range (c)
Projection
distance (a)
Composite, S-video
480
I
/P, 1080
I
720P
RGB
Vertical
placement range
(e)
Projection
distance (b)
Composite, S-video
480
I
/P, 1080
I
720P
RGB
Vertical
placement range
(f)
Horizontal Placement range (d)
(a) = (0.029330688
x
- 0.038639669)
x
: Screen size (diag.)(in)
(b) =(0.02434978
x
- 0.034646716)
6.4m (20'10'')
4.8m (15' 7'')
4.2m (13'10'')
3.4m (11'
3''
)
3.2m (10' 4'')
2.9m (9' 6'')
2.7m (8' 8'')
2.3m (7' 5'')
1.9m (6' 2'')
1.2m (4' 1'')
–
4.4m (14' 4'')
2.9m (9' 6'')
2.4m (7' 12'')
2.1m (6' 10'')
1.7m (5' 8'')
1.1m (3' 9'')
–
0.7m (2'
4'')
0.5m (1'
8'')
0.4m (1'
4'')
0.3m (
1'
12'')
0.3m (
1'
12'')
0.2m (
1'
8'')
–
0.7m (2'
4'')
0.5m (1'
8'')
0.4m (1'
4'')
0.3m (
1'
12'')
0.3m (
1'
12'')
0.2m (
1'
8'')
4.8m (15' 10'')
3.6m (11' 10'')
2.4m (7' 11'')
2.0m (6'
7'')
1.7m (5'
8'')
1.4m (4'
8'')
0.9m (3'
1'')
0.8m (2'
7'')
0.6m (1' 12'')
0.4m (1'
4'')
0.3m (
1'
12'')
0.3m (
1'
12'')
0.2m (
1'
8'')
0.1m (
1'
4'')
0.9m (2' 11'')
0.7m (2'
4'')
0.4m (1'
4'')
0.4m (1'
4'')
0.3m (
1'
12'')
0.2m (
1'
8'')
0.1m (
1'
4'')
0.6m (1' 12'')
0.5m (1'
8'')
0.3m (
1'
12'')
0.2m (
1'
8'')
0.2m (
1'
8'')
0.1m (
1'
4'')
0.1m (
1'
4'')
0.8m (2'
7'')
0.6m (1' 12'')
0.4m (1'
4'')
0.3m (
1'
12'')
0.3m (
1'
12'')
0.2m (
1'
8'')
0.1m (
1'
4'')
–
0.8m (2' 7'')
0.5m (1' 8'')
0.4m (1' 4'')
0.4m (1' 4'')
0.3m (
1'
12'')
0.2m (
1'
8'')
–
1.0m (3' 3'')
0.6m (1' 12'')
0.5m (1' 8'')
0.4m (1' 4'')
0.4m (1' 4'')
0.2m (
1'
8'')
1.1m (3'
7'')
0.8m (2'
7'')
0.7m (2' 4'')
0.6m (1' 12'')
0.5m (1'
8'')
0.5m (1'
8'')
0.4m (1'
4'')
0.4m (1'
4'')
0.3m (
2'
12'')
0.2m (
1'
8'')
1.1m (3'
7'')
0.8m (2'
7'')
0.7m (2' 4'')
0.5m (1'
8'')
0.5m (1'
8'')
0.5m (1'
8'')
0.4m (1'
4'')
0.4m (1'
4'')
0.3m (
2'
12'')
0.2m (
1'
8'')
5.3m (17' 4'')
3.9m (12' 11'')
3.5m (11' 6'')
2.8m
(9' 1'')
2.6m
(8' 7'')
2.4m
(7' 11'')
2.2m
(7' 2'')
1.9m
(6' 2'')
1.6m
(5' 1'')
1.0m
(3' 4'')
1.5m (4' 11'')
1.1m (3'
7'')
0.9m (2' 11'')
0.7m (2' 4'')
0.7m (2' 4'')
0.6m (1' 12'')
0.6m (1' 12'')
0.5m (1'
8'')
0.4m (1'
4'')
0.2m (
1'
8'')
0.9m (2' 11'')
0.6m (1' 12'')
0.6m (1' 12'')
0.4m (1'
4'')
0.4m (1'
4'')
0.4m (1'
4'')
0.3m (
2'
12'')
0.3m (
2'
12'')
0.2m (
1'
8'')
0.1m (
1'
4'')
1.0m (3'
3'')
0.7m (2' 4'')
0.6m (1' 12'')
0.5m (1'
8'')
0.5m (1'
8'')
0.4m (1'
4'')
0.4m (1'
4'')
0.3m (
2'
12'')
0.3m (
2'
12'')
0.1m (
1'
4'')
0.7m (2' 4'')
0.5m (1'
8'')
0.4m (1'
4'')
0.3m (
2'
12'')
0.3m (
2'
12'')
0.3m (
2'
12'')
0.3m (
2'
12'')
0.2m (
1'
8'')
0.2m (
1'
8'')
0.1m (
1'
4'')
0.9m (2' 11'')
0.6m (1' 12'')
0.6m (1' 12'')
0.4m (1'
4'')
0.4m (1'
4'')
0.4m (1'
4'')
0.3m (
2'
12'')
0.3m (
2'
12'')
0.2m (
1'
8'')
0.1m (
1'
4'')
1.3m (4' 3'')
0.9m (2' 11'')
0.8m (2' 7'')
0.6m (1' 12'')
0.6m (1' 12'')
0.5m (1' 8'')
0.5m (1' 8'')
0.4m (1' 4'')
0.3m (
2'
12'')
0.2m (
1'
8'')
(a) = (0.031954888
x
- 0.034060187)
x
: Screen size (diag.)(in)
(b) =(0.026528341
x
- 0.034646716)
200" (508cm)
150" (381cm)
133" (338cm)
106" (269cm)
100" (254cm)
92"
(234cm)
84"
(213cm)
72"
(183cm)
60"
(152cm)
40"
(102cm)
200" (508cm)
150" (381cm)
100" (254cm)
84"
(213cm)
72"
(183cm)
60"
(152cm)
40"
(102cm)
XV_Z201E_E_p25_28.p65
03.10.30, 12:17AM
26
Click on the first or last page to see other XV-Z201E (serv.man31) service manuals if exist.