Sharp XG-V10XE (serv.man32) User Manual / Operation Manual ▷ View online
76
List of Error Messages
The internal temperature is abnormally high.
The internal temperature is high.
Temperature Error
The internal temperature is high.
Temperature Error
[Problem]
Blocked air intake. / Clogged air filter.
Cooling fan breakdown. / Internal circuit failure.
[Possible Solution]
a. Relocate the projector to an area with proper ventilation.
b. Replace the filter.
c. Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or
Blocked air intake. / Clogged air filter.
Cooling fan breakdown. / Internal circuit failure.
[Possible Solution]
a. Relocate the projector to an area with proper ventilation.
b. Replace the filter.
c. Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or
Service Center for repair.
The cooling fan is not operating.
Internal Cooling Fan Error
Internal Cooling Fan Error
[Problem]
Cooling fan breakdown.
[Possible Solution]
Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or
Service Center for repair.
Cooling fan breakdown.
[Possible Solution]
Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or
Service Center for repair.
The filter cover is open.
Filter Cover Error
Filter Cover Error
[Problem]
Filter cover is not properly mounted, or filter is not properly mounted.
[Possible Solution]
Mount the filter cover and filter properly.
Filter cover is not properly mounted, or filter is not properly mounted.
[Possible Solution]
Mount the filter cover and filter properly.
The remaining lamp life is below 100 hours.
[Possible Solution]
a. Carefully replace the lamp.
b. Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or
a. Carefully replace the lamp.
b. Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or
Service Center for repair.
The lamp is burnt-out.
[Possible Solution]
a. Carefully replace the lamp.
b. Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or
a. Carefully replace the lamp.
b. Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or
Service Center for repair.
Lamp Error
The lamp does not ignite.
The lamp does not ignite.
[Problem]
Burnt-out lamp. / Lamp circuit failure.
[Possible Solution]
a. Carefully replace the lamp.
b. Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or
Burnt-out lamp. / Lamp circuit failure.
[Possible Solution]
a. Carefully replace the lamp.
b. Take the projector to your nearest Authorized Sharp Industrial LCD Products Dealer or
Service Center for repair.
77
T
roubleshooting
No response from the projector.
Communication Error
Communication Error
[Problem]
Communications with the projector cannot be established for some reason.
[Possible Solution]
Set the computer and projector to the same communications speed.
Check the connections of the cables.
Communications with the projector cannot be established for some reason.
[Possible Solution]
Set the computer and projector to the same communications speed.
Check the connections of the cables.
COM1 is already used by other application software.
[Possible Solution]
Use a COM port not being used by another application software.
Use a COM port not being used by another application software.
This command cannot be used with this projector now.
[Problem]
A suitable projector has not been selected at “Projector Setting”.
[Possible Solution]
Select a suitable projector at “Projector Setting”.
A suitable projector has not been selected at “Projector Setting”.
[Possible Solution]
Select a suitable projector at “Projector Setting”.
Some functions may not be usable under certain circumstances. For example, the “Auto
Sync.” function cannot be used if no image source is being input to the projector. The
above error message appears in such cases as well.
Sync.” function cannot be used if no image source is being input to the projector. The
above error message appears in such cases as well.
Unable to connect to server.
[Problem]
Could not connect to e-mail server for sending e-mail messages.
[Possible Solution]
There may be no such e-mail server in the network or the server may be down. For
details, contact the system operator.
Could not connect to e-mail server for sending e-mail messages.
[Possible Solution]
There may be no such e-mail server in the network or the server may be down. For
details, contact the system operator.
Incorrect sender e-mail address
[Problem]
E-mail sender’s e-mail address has not been properly input.
[Possible Solution]
Input the proper e-mail address.
E-mail sender’s e-mail address has not been properly input.
[Possible Solution]
Input the proper e-mail address.
Incorrect recipient e-mail address.
[Problem]
E-mail recipient’s e-mail address has not been properly input.
[Possible Solution]
Input the proper e-mail address.
E-mail recipient’s e-mail address has not been properly input.
[Possible Solution]
Input the proper e-mail address.
IP Address is imperfect.
Please input the correct IP Address.
Please input the correct IP Address.
[Problem]
The IP address input at “Scan Setting” is not correct.
[Possible Solution]
Input the proper IP address.
The IP address input at “Scan Setting” is not correct.
[Possible Solution]
Input the proper IP address.
78
22
21
29
71
2
68
8
63
71
71
61
42
22
22
59
59
31
22
23
64
24
24
7
7
7
2
Glossary
Version information
Specify if this software launches automatically upon startup
Function turning both “Black Screen” and “Mute” on.
Image displayed when no signal is input.With the
XG-V10 Series projector
, same as startup image.
Image file format
Transfer an image of what is currently displayed on a monitor.
Communication port
Rate of compression of the images transmitted from a
PC to the projector
PC to the projector
General term for background image and startup image
Transfer the custom image to the projector. (Unless the custom image is
transferred again (overwritten), the screen is retained in the projector’s memory.)
transferred again (overwritten), the screen is retained in the projector’s memory.)
Select an item and modify it using the mouse.
Browse the log of errors generated in the multiple projector operation mode.
Exit from this software
Main menu item
Projector’s specific values of specified colours
Adjust the projector’s gamma values from PC
Make the settings for controlling groups of projectors in
the multiple operation mode.
the multiple operation mode.
Help in using this software
For specifying the individual projectors when controlling
multiple projectors simultaneously.
multiple projectors simultaneously.
Transfer the image to the projector. (Unlike custom image
transfer, not stored in projector.)
transfer, not stored in projector.)
Abbreviation of “Internet Protocol”
Address for specifying computer on network.
Sharp infrared wireless communication
Abbreviation of “Infrared Data Association”. Name of infrared
communications standardization group and name of standards
communications standardization group and name of standards
Standard format (protocol) for transmission of images
Abbreviation of “Joint Photographic Experts Group”
“JPEG” is an image file format.
“JPEG” is an image file format.
About This Software
Auto-Launch ON/OFF
AV Mute
Background Image
BMP
Capture & Transfer
COM
Compression Rate
Custom Image
Custom Image Transfer
Drag & Drop
Error Log Viewer
Exit
File
Gamma
Gamma Correction
Group Setting
Help
ID
Image Transfer
IP
IP Address
IrCOM
IrDA
IrTran-P
JPEG
Word
Explanation
Page
79
Glossary/
Services
Word
Explanation
Page
Keylock Level
LAN
Mode
Multiple Control
Multiple Operation Panel
Open
Operation Mode
Option
Password
Presentation Transfer
Projector Name
Projector Setting
Projector & Unique Name
Quick Transfer
RS-232C
Single Control
Scan
Scan Setting
Self Run
Serial Number
Startup Image
Transfer Mode
Transmission Speed
Unique Name
35
8
21
29
29
65
20
21
33
64
36
26
36
70
7
49
24
24
67
24
71
71
24
36
Set whether to enable or disable operating buttons on projector.
Local Area Network
Main menu item
Simultaneous control of multiple projectors from PC.
Operating panel for integrated control of projectors in
multiple projector operation mode.
multiple projector operation mode.
Open file folder containing images to be transmitted to
the projector (for Presentation Transfer)
the projector (for Presentation Transfer)
Set whether to control a single projector or multiple projectors.
Main menu item
When a password is set, some functions can only be
changed by the person with the password.
changed by the person with the password.
Transfer a series of images (BMP or JPEG) to the projector
Names freely given to individual projectors. Unlike
“Unique Name”, can be changed freely by anyone.
“Unique Name”, can be changed freely by anyone.
Set the method of communication with the projector.
Make and change the “Projector Name” and “Unique Name” settings.
Shortcut to transferring an image of what is currently displayed on a monitor
Serial interface protocol with which many PCs are equipped.
Control a single projector from a PC.
Function for searching for all connecting projectors and
automatically identifying them.
automatically identifying them.
Set the COM port and IP address for searching with the
scan function.
scan function.
Scan slides in a specified folder one after another to the projector
Serial numbers assigned to individual projectors
Image displayed when projector turned on. With the
XG-V10 Series projector
, same as background image.
Change the function from “Custom image Transfer” and/
or “Image Transfer”
or “Image Transfer”
Transmission speed via the projector’s RS-232C port and
PC’s serial port.
PC’s serial port.
Names given to individual projectors. Unlike “Projector
Name”, when the password setting is set, can only be
changed by person with password.
Name”, when the password setting is set, can only be
changed by person with password.
Click on the first or last page to see other XG-V10XE (serv.man32) service manuals if exist.