Sharp XG-NV7XE (serv.man11) User Manual / Operation Manual ▷ View online
24
2
The default setting is “Image Transfer”. To send a custom
image, select “Startup Image Transfer”. Then click “OK”.
image, select “Startup Image Transfer”. Then click “OK”.
When selecting “Startup Image Transfer”, the following dialogue
box will appear to notify you that the compression rate is set
automatically to high quality (slow transmission) mode.
box will appear to notify you that the compression rate is set
automatically to high quality (slow transmission) mode.
3
Click the “File” menu to select “Wireless (IrCOM) or
RS-232C...”
RS-232C...”
.
The image can be sent either wirelessly (via IrCOM) or via the
RS-232C serial port of the projector and PC.
RS-232C serial port of the projector and PC.
4
Select the desired image and transfer it to the projector.
Then saving is completed.
Then saving is completed.
w
To execute this procedure via Presentation Transfer,
see page 25
.
w
To execute this procedure via Capture & Transfer,
see page 29
.
The “Startup Image Transfer” mode saves one image file only and
overwrites the previously transferred image if you send another image
file.
To avoid erasing the custom image, you should change the transfer
mode to “Image Transfer” after sending the custom image.
overwrites the previously transferred image if you send another image
file.
To avoid erasing the custom image, you should change the transfer
mode to “Image Transfer” after sending the custom image.
25
Transferring Images
Transferring Images
Presentation Transfer
This mode makes it possible to transfer images saved as BMP or JPEG
files to the projector. A preview of the slides in the file folder selected is
displayed on the PC monitor.
files to the projector. A preview of the slides in the file folder selected is
displayed on the PC monitor.
Before Presentation
●
Both infrared communications and serial (RS-232C) cable
communications are available for this mode. Select the connection
type
communications are available for this mode. Select the connection
type
(page 20)
.
●
Specify the projector model to which you will transfer images
(page 20)
.
●
Select the method for sending images. You can automatically send
all images in order at desired intervals, while sending a selected image
one by one
all images in order at desired intervals, while sending a selected image
one by one
(page 21)
.
●
Save the slides as BMP or JPEG files. The image size must be
1024
1024
×
768 or lower.
If you are using Microsoft PowerPoint or similar presentation software,
ensure the slide or page size is 1024
ensure the slide or page size is 1024
×
768 or lower. If the saved JPEG
slide size is too big, Sharp Advanced Presentation Software will prompt
you to reduce the slide size. You can lower the slide size in the “File”
menu, “Page Setup” or “Slide Setup” before converting to JPEG. (For
more details, refer to your presentation software’s operation manual.)
you to reduce the slide size. You can lower the slide size in the “File”
menu, “Page Setup” or “Slide Setup” before converting to JPEG. (For
more details, refer to your presentation software’s operation manual.)
1) Open the desired presentation file.
2) Select “File”, then “Page Setup” or “Slide Setup”.
3) Change the page width and height to a smaller size.
4) Click “OK” for the new settings and save the slides in BMP or
2) Select “File”, then “Page Setup” or “Slide Setup”.
3) Change the page width and height to a smaller size.
4) Click “OK” for the new settings and save the slides in BMP or
JPEG format again.
●
For Microsoft PowerPoint users:
1) Open the desired PowerPoint presentation.
2) Select “File”, then select “Save As”.
1) Open the desired PowerPoint presentation.
2) Select “File”, then select “Save As”.
w
This opens the “Save As” dialogue box.
3) Click “
” in “Save as type”.
4) Select “JPEG”.
5) Specify a “File name” for the JPEG Images of your presentation.
6) Specify a “Save In” location.
7) Click “Save”.
8) A “PowerPoint” dialogue box appears. To convert the entire
5) Specify a “File name” for the JPEG Images of your presentation.
6) Specify a “Save In” location.
7) Click “Save”.
8) A “PowerPoint” dialogue box appears. To convert the entire
presentation as JPEG images, click “Yes”. To convert only the
current slide, click “No”.
current slide, click “No”.
26
1
Select the “Presentation Transfer” mode.
See section “Opening Modes”
(page 17)
.
w
The “Presentation Transfer” window will open.
1
4
5
3
2
1
Images in the selected folder (step 3)
2
Information of the selected image
3
Displays the type of “Transfer Mode” (step 4)
4
Starts the “Self Run” transfer
(page 21)
.
5
“Send Image” Transfer
(page 27)
.
2
Click the “File” menu, and select “Open...”.
w
The “Browse for Folder” window will open.
3
Select the folder in which the image files (Presentation
Slides) are saved. And click “OK”.
Slides) are saved. And click “OK”.
w
The images in the selected folder are previewed in
the
“Presentation Transfer” window
.
If the size of image does not fill the box (800
×
500), the image will
be displayed with black space. However, the software will transfer
the image at the original resolution.
the image at the original resolution.
27
4
Click the “Option” menu, and select “Transfer Mode...”.
w
The “Transfer Mode” dialogue box will open.
5
Select “Image Transfer” and click “OK”.
For details of the “Startup Image Transfer”,
see page 24
.
6
The projector must be in IrCOM mode to receive the
images. Press the “IrCOM” button on the projector or the
remote control.
images. Press the “IrCOM” button on the projector or the
remote control.
For the “Self Run” transfer
(page 21)
, skip over here to section “To
send all the images (“Self Run”)” on the next page.
To send a single image (“Send Image”)
1
Select an image in the “Presentation Transfer” window
to transfer.
to transfer.
If you want to change the compression rate, see the section
“Changing Compression Rate”
“Changing Compression Rate”
(page 22)
.
●
The compression rate is applied to all the images in the selected folder.
●
Changing the compression rate will change the image picture
quality and transfer speed.
quality and transfer speed.
2
Click the “Current” button in the “Send Image” box.
w
The “Transmitted File Information” dialogue box appears and
the transfer begins. If you want to stop the transfer, click “CANCEL”.
Transferring Images
Click on the first or last page to see other XG-NV7XE (serv.man11) service manuals if exist.