Sharp MX-TM10 (serv.man3) Service Manual ▷ View online
4
4
4-25
4-25
Disassembly and assembly > Sensors > Removing the waste paper full sensor (light receiving/S011(PCB3))
Disassembly and assembly > Sensors > Removing the waste paper full sensor (light receiving/S011(PCB3))
Removing the waste paper full sensor (light receiving/S011(PCB3))
1) Open the finisher front door.
F-4-58
2) Pull out the saddle unit.
F-4-59
3)Remove 1 screw and pull out the connector.
x1
x1
F-4-60
4
4
4-26
4-26
Disassembly and assembly > Sensors > Removing the waste paper full sensor (light receiving/S011(PCB3))
Disassembly and assembly > Sensors > Removing the waste paper full sensor (light receiving/S011(PCB3))
4)Remove 2 hooks and remove the waste paper full sensor.
x2
F-4-61
4
4
4-27
4-27
Disassembly and assembly > PCBs > Removing the trimmer controller PCB (PCB1)
Disassembly and assembly > PCBs > Removing the trimmer controller PCB (PCB1)
PCBs
Removing the trimmer controller PCB (PCB1)
1) Remove the trimmer unit from the finisher.
2) Remove 3 screws and remove the PCB cover.
x1
x2
F-4-62
3) Pull out all connectors on the trimmer controller PCB.
x7
F-4-63
4) Remove 3 screws, 1 locking support, and remove the trimmer controller PCB.
x3
F-4-64
5
5
Actual wiring chart
A c t u a l w i r i n g
chart
chart
■
Actual wiring chart
Click on the first or last page to see other MX-TM10 (serv.man3) service manuals if exist.