Sony SDM-HS95 Service Manual ▷ View online
SDM-HS95
AEP Model
Chinese Model
TFT LCD COLOR COMPUTER DISPLAY
SERVICE MANUAL
– 2 –
SDM-HS95 (E)
There are some different LCD panels are used in the model SDM-HS95 .
Therefore the repair parts are also different .
Please confirm the serial number before repairing.
Therefore the repair parts are also different .
Please confirm the serial number before repairing.
No.
Model name
Colour
Destination
Serial Range
Panel
Plant
SDM-HS95
SILVER
AEP
6,000,001-6,150,000
AUO
LGE
SDM-HS95
SILVER
AEP
6,300,001-6,450,000
LPL
LGE
SDM-HS95
BLACK
AEP
6,500,001-6,600,000
AUO
LGE
SDM-HS95
BLACK
AEP
6,700,001-6,800,000
LPL
LGE
SDM-HS95
SILVER
CHINA
6,000,001-6,150,000
AUO
LGE
SDM-HS95
SILVER
CHINA
6,300,001-6,450,000
LPL
LGE
SDM-HS95
BLACK
CHINA
6,500,001-6,600,000
AUO
LGE
SDM-HS95
BLACK
CHINA
6,700,001-6,800,000
LPL
LGE
– 3 –
SDM-HS95 (E)
1. LCD CHARACTERISTICS
Type
: TFT Color LCD Module
Active Display Area
: 19 inch(376.32(H) x 301.056(V))
Size
: 404.2(W) x 330(H) x 20(D)
Pixel Pitch
: (0.098 x 3) x 0.294
Color Depth
: 16.2M Colors
Electrical Interface
: LVDS
Surface Treatment
: Glare
Backlight Unit
: 4-CCFL
(Cold Cathode Fluorescent Lamp)
(Cold Cathode Fluorescent Lamp)
2. OPTICAL CHARACTERISTICS
2-1. Viewing Angle by Contrast Ratio
≥
10
Right : +60
°(Min.), +70°(TYP) Left : +60°(Min.), +70°(TYP)
Top :+65
° min., +75°(Typ) Bottom : +55°min., +65°(Typ)
2-2. Luminance
: 250(Typ)
2-3. Contrast Ratio
: 600(Typ)
3. SIGNAL (Refer to the Timing Chart)
3-1. Sync Signal
• Type
: Separate Sync
3-2. Video Input Signal
1) Type
: R, G, B Analog
2) Voltage Level
: 0~0.70 V(
± 5%)
3) Input Impedance
: 75
Ω
3-3. Operating Frequency
Horizontal(Analog): 28 ~ 80kHz
Vertical(Analog)
Vertical(Analog)
: 48 ~ 75Hz
4
.
Max. Resolution
Analog
: 1280 x 1024 / 75Hz
5. POWER SUPPLY
5-1. Power : AC 100~240V, 50/60Hz , 1.0A
5-2. Power Consumption
6. ENVIRONMENT
6-1. Operating Temperature: 5
°C~35°C (41°F~95°F)
(Ambient)
6-2. Relative Humidity
: 10%~80%
(Non-condensing)
7. DIMENSIONS (with TILT/SWIVEL)
Width
: 435 mm
Depth
: 146 mm
Height
: 418 mm
8. WEIGHT (with TILT/SWIVEL)
Net. Weight
: 6.0 kg
Gross Weight
: 8.36 kg
SPECIFICATIONS
MODE
POWER ON (NORMAL)
STAND-BY
SUSPEND
DPMS OFF
POWER S/W OFF
H/V SYNC
ON/ON
OFF/ON
ON/OFF
OFF/OFF
-
POWER CONSUMPTION
less than 50 W
less than 1 W
less than 1 W
less than 1 W
less than 1 W
LED COLOR
GREEN
AMBER
AMBER
AMBER
OFF
VIDEO
ACTIVE
OFF
OFF
OFF
-
CONTENTS
SPECIFICATIONS ................................................... 3
PRECAUTIONS ....................................................... 4
TIMING CHART ....................................................... 8
OPERATING INSTRUCTIONS .................................9
PRECAUTIONS ....................................................... 4
TIMING CHART ....................................................... 8
OPERATING INSTRUCTIONS .................................9
DISASSEMBLY ..................................................... 10
SERVICE OSD ..................................................... 12
EXPLODED VIEW ...................................................13
EXPLODED VIEW PARTS LIST .............................14
– 4 –
SDM-HS95 (E)
WARNING FOR THE SAFETY-RELATED COMPONENT.
• There are some special components used in LCD
monitor that are important for safety.
These parts are
marked on the schematic diagram and the
replacement parts list. It is essential that these critical
parts should be replaced with the manufacturer’s
specified parts to prevent electric shock, fire or other
hazard.
replacement parts list. It is essential that these critical
parts should be replaced with the manufacturer’s
specified parts to prevent electric shock, fire or other
hazard.
• Do not modify original design without obtaining written
permission from manufacturer or you will void the
original parts and labor guarantee.
original parts and labor guarantee.
TAKE CARE DURING HANDLING THE LCD MODULE
WITH BACKLIGHT UNIT.
WITH BACKLIGHT UNIT.
• Must mount the module using mounting holes arranged
in four corners.
• Do not press on the panel, edge of the frame strongly
or electric shock as this will result in damage to the
screen.
screen.
• Do not scratch or press on the panel with any sharp
objects, such as pencil or pen as this may result in
damage to the panel.
damage to the panel.
• Protect the module from the ESD as it may damage the
electronic circuit (C-MOS).
• Make certain that treatment person’s body are
grounded through wrist band.
• Do not leave the module in high temperature and in
areas of high humidity for a long time.
• The module not be exposed to the direct sunlight.
• Avoid contact with water as it may a short circuit within
the module.
• If the surface of panel become dirty, please wipe it off
with a softmaterial. (Cleaning with a dirty or rough cloth
may damage the panel.)
may damage the panel.)
WARNING
BE CAREFUL ELECTRIC SHOCK !
• If you want to replace with the new backlight (CCFL) or
inverter circuit, must disconnect the AC adapter
because high voltage appears at inverter circuit about
650Vrms.
because high voltage appears at inverter circuit about
650Vrms.
• Handle with care wires or connectors of the inverter
circuit. If the wires are pressed cause short and may
burn or take fire.
burn or take fire.
Leakage Current Hot Check Circuit
PRECAUTION
CAUTION
Please use only a plastic screwdriver to protect yourself
from shock hazard during service operation.
from shock hazard during service operation.
1.5 Kohm/10W
To Instrument's
exposed
METALLIC PARTS
exposed
METALLIC PARTS
Good Earth Ground
such as WATER PIPE,
CONDUIT etc.
such as WATER PIPE,
CONDUIT etc.
AC Volt-meter
