Sharp MX-PE10 FIERY (serv.man45) Service Manual / Technical Bulletin ▷ View online
Page 8 of 8
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
2 Functionality to access to digital contents stored on copy-protected read-only media
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
©2012 Electronics For Imaging
Customer Support
Release Note
Before installing MX_PE_10_SP2.exe
1 Known issues listed below, read before installing MX_PE_10_SP2.exe patch:
•
None
2 The following prerequisite(s) must be installed in the order specified before applying 1-
MX_PE_10_SP2.exe patch:
• SP1
3 Do NOT install any of the following patch(es) after installing MX_PE_10_SP2.exe patch. If
you must install any of the patch(es) below, do so before installing MX_PE_10_SP2.exe
patch:
patch:
• 1-1KM7HP.exe
• SP1
• SP1
4 This patch is Exclusive which means it must be installed independently and the server
rebooted/restarted once. After which, other patches can be applied to the server.
Patch installation instructions
1 Make sure that the Fiery printer controller reaches Idle.
2 Execute MX_PE_10_SP2.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
2 Execute MX_PE_10_SP2.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
a. Logon must be admin. This is fixed and cannot be modified.
b. Password is the Fiery administrator login password.
c. Hostname can be the IP address or the Fiery server name.
4 After the patch is downloaded and when prompted by the Fiery Patch Downloader, choose
Reboot. (If you choose to Restart later, make sure you manually reboot the server for the
changes to take effect)
changes to take effect)
5 Wait until the Fiery controller reaches Idle and print the Configuration page.
6 Verify that the System Updates Log section contains the patch Id as SP2.
6 Verify that the System Updates Log section contains the patch Id as SP2.
Page 1 of 2
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
2 Functionality to access to digital contents stored on copy-protected read-only media
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
©2012 Electronics For Imaging
Customer Support
Release Note
Fiery Patch Release Notes
General information
Defect ID number
FIT191743
Product name
MX-PE10
Release date
18 Oct 2013
Files included in this release
File name
File size
Md5 Checksum
FIT191743.exe
5.62MB
8ae938dafcb54ac1a6e6942f4df2ff7c
Issue(s) addressed with this release
• FIT191743: Blank page printing on 13"x19" at 1200dpi
Steps to reproduce the Issue(s)
1 Open any PDF File
2 Select Properties Quick Access tab Paper Size 13X19.
3 Image tab Resolution 1200dpi
4 Click Ok
5 Print the file.
Result: The output page is blank. The issue only happens with 1200dpi.
Before installing FIT191743.exe
1 Known issues listed below, read before installing FIT191743.exe patch:
•
None.
2 The following prerequisite(s) must be installed in the order specified before applying
FIT191743 patch:
• SP1
• SP2
• SP1
• SP2
Page 2 of 2
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
Customer Support
Release Note
3 Do NOT install any of the following patch(es) after installing FIT191743 patch. If you must
install any of the patch(es) below, do so before installing FIT191743 patch:
• None
• None
4 This patch is exclusive which means it must be installed independently and the server
rebooted/restarted once. After which, other patches can be applied to the server.
Patch installation instructions
1 Make sure that the Fiery printer controller reaches Idle.
2 Execute FIT191743.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
2 Execute FIT191743.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
a. Logon must be admin. This is fixed and cannot be modified.
b. Password is the Fiery administrator login password.
c. Hostname can be the IP address or the Fiery server name.
4 After the patch is downloaded and when prompted by the Fiery Patch Downloader, choose
Reboot. (If you choose to Restart later, make sure you manually reboot the server for the
changes to take effect)
changes to take effect)
5 Wait until the Fiery controller reaches Idle and print the Configuration page.
6 Verify that the System Updates Log section contains the patch number FIT191743.
6 Verify that the System Updates Log section contains the patch number FIT191743.
Page 2 of 2
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
Customer Support
Release Note
3 Do NOT install any of the following patch(es) after installing FIT191743 patch. If you must
install any of the patch(es) below, do so before installing FIT191743 patch:
• None
• None
4 This patch is exclusive which means it must be installed independently and the server
rebooted/restarted once. After which, other patches can be applied to the server.
Patch installation instructions
1 Make sure that the Fiery printer controller reaches Idle.
2 Execute FIT191743.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
2 Execute FIT191743.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
a. Logon must be admin. This is fixed and cannot be modified.
b. Password is the Fiery administrator login password.
c. Hostname can be the IP address or the Fiery server name.
4 After the patch is downloaded and when prompted by the Fiery Patch Downloader, choose
Reboot. (If you choose to Restart later, make sure you manually reboot the server for the
changes to take effect)
changes to take effect)
5 Wait until the Fiery controller reaches Idle and print the Configuration page.
6 Verify that the System Updates Log section contains the patch number FIT191743.
6 Verify that the System Updates Log section contains the patch number FIT191743.