Sharp MX-PE10 FIERY (serv.man36) Service Manual / Technical Bulletin ▷ View online
Page 1 of 2
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
©2012 Electronics For Imaging
Customer Support
Release Note
Fiery Patch Release Notes
General information
Defect ID number
FIT208794
Product name
MX-PE10
Release date
24 April 2104
Files included in this release
File name
File size
Md5 Checksum
FIT208794.exe
2325248 bytes
29f87dba5aa8838759ca9463867b47b2
Issue(s) addressed with this release
• FIT208794: Fiery patch to update Product Name when queried from MIB browser.
Steps to reproduce the Issue(s)
1 Launch any MIB browser.
2 Enter the IP of the Fiery Server.
3 Query for sysName, sysDescr and sysObjectID
2 Enter the IP of the Fiery Server.
3 Query for sysName, sysDescr and sysObjectID
Result: The information of these queries is incorrect.
Before installing FIT208794.exe
1 Known issues listed below, read before installing FIT208794.exe patch:
•
None.
2 The following prerequisite(s) must be installed in the order specified before applying
FIT208794 patch:
• None
• None
3 Do NOT install any of the following patch(es) after installing FIT208794 patch. If you must
install any of the patch(es) below, do so before installing FIT208794 patch:
• None.
• None.
4 This patch is exclusive which means it must be installed independently and the server
rebooted/restarted once. After which, other patches can be applied to the server.
Page 2 of 2
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
Customer Support
Release Note
Patch installation instructions
1 Make sure that the Fiery printer controller reaches Idle.
2 Execute FIT208794.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
2 Execute FIT208794.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
a. Logon must be admin. This is fixed and cannot be modified.
b. Password is the Fiery administrator login password.
c. Hostname can be the IP address or the Fiery server name.
4 After the patch is downloaded and when prompted by the Fiery Patch Downloader, choose
Reboot. (If you choose to Restart later, make sure you manually reboot the server for the
changes to take effect)
changes to take effect)
5 Wait until the Fiery controller reaches Idle and print the Configuration page.
6 Verify that the System Updates Log section contains the patch number FIT208794.
6 Verify that the System Updates Log section contains the patch number FIT208794.
Display