Sharp MX-PE10 FIERY (serv.man28) Service Manual / Technical Bulletin ▷ View online
Page 1 of 2
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
©2012 Electronics For Imaging
Customer Support
Release Note
Fiery Patch Release Notes
General information
Defect ID number
FIT100592694
Product name
MX-PE10
Release date
21 November 2014
Files included in this release
File name
File size
Md5 Checksum
FIT100592694.exe
12314816 bytes
eaef5b844bc6143116cb10d51282e43f
Issue(s) addressed with this release
• FIT100592694: Fiery patch to support media weight upto 300gsm from Multi Bypass
tray of LCT.
• FIT100699254 - Right exit tray cannot select when Booklet Maker is attached
Steps to use the new feature
• FIT100592694: Fiery patch to support media weight upto 300gsm from Multi Bypass
tray of LCT.
1 Import any multipage PDF file to Command WorkStation Hold queue.
2 Open Job Properties and go to Media Tab Paper size A4 LEF; Media Type Heavy
2 Open Job Properties and go to Media Tab Paper size A4 LEF; Media Type Heavy
paper 3; Paper Source
Multi Bypass tray for LCT.
3 Print the job
Result: The Job is printed from Multi Bypass tray for LCT.
• FIT100699254 - Right exit tray cannot select when Booklet Maker is attached
Engine Configuration: 100 sheet finisher for booklet maker + Curl correction unit + Plockmatic
booklet maker + Exit tray (right)
1 Import any multipage PDF file to Command WorkStation Hold queue.
booklet maker + Exit tray (right)
1 Import any multipage PDF file to Command WorkStation Hold queue.
2 Open Job Properties and go to Finishing Tab Select Output tray
Result: Unable to select Right exit tray as output option. Option is grayed off
Page 2 of 2
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
Customer Support
Release Note
Before installing FIT100592694.exe
1 Known issues listed below, read before installing FIT100592694 patch:
• None
2 The following prerequisite(s) must be installed in the order specified before applying
FIT100592694 patch:
• FIT206157
• FIT211917
• FIT206157
• FIT211917
• FIT207489
• FIT208794
• FIT208794
3 Do NOT install any of the following patch(es) after installing FIT100592694 patch. If you must
install any of the patch(es) below, do so before installing FIT100592694 patch:
• None.
• None.
4 This patch is exclusive which means it must be installed independently and the server
rebooted/restarted once. After which, other patches can be applied to the server.
Patch installation instructions
1 Make sure that the Fiery printer controller reaches Idle.
2 Execute FIT100592694.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
2 Execute FIT100592694.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
a. Logon must be admin. This is fixed and cannot be modified.
b. Password is the Fiery administrator login password.
c. Hostname can be the IP address or the Fiery server name.
4 After the patch is downloaded and when prompted by the Fiery Patch Downloader, choose
Reboot. (If you choose to Restart later, make sure you manually reboot the server for the
changes to take effect)
changes to take effect)
5 Wait until the Fiery controller reaches Idle and print the Configuration page.
6 Verify that the System Updates Log section contains the patch number FIT100592694.
6 Verify that the System Updates Log section contains the patch number FIT100592694.
Display