DOWNLOAD Sharp MX-PE10 FIERY (serv.man45) Service Manual ↓ Size: 247.48 KB | Pages: 11 in PDF or view online for FREE

Model
MX-PE10 FIERY (serv.man45)
Pages
11
Size
247.48 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / RELEASE OF A PATCHES SP2 (FIT38065) and FIT191743 FOR A PRINT SERVER AND RELEASE NOTES
File
mx-pe10-fiery-sm45.pdf
Date

Sharp MX-PE10 FIERY (serv.man45) Service Manual / Technical Bulletin ▷ View online

 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
CCE-1218 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1. Model Name: 
MX-PE10 (Option for MX-6500N/7500N) 
 
2. Description:
 
A Software patch for a EFI print server (MX-PE10) has been released. 
 
 
 
Please refer to the attached release note for detail. 
 
 
 
EFI supports only the latest firmware, so please make sure to update to the latest  
 
 
 
firmware before the installation of this patch. 
 
 
 
The patches described below are subject for system update. So please understand there  
 
 
 
may have been notification of the system update prior to the issuance of this report. 
 
 
 
The operation of the MFP will be more stabilized if this patch is installed along with  
 
 
 
the MFP main unit firmware for MX-6500N/7500N with support for SP2.  
 
 
 
(Please refer to the information on main unit firmware version listed below for detail.) 
 
1.  Information on SP2 patch (FIT38605) 
 
 - Name of release note file:   FIT38065_relnote.doc 
 - Name of patch file: 
 FIT38065.zip 
 MX_PE_10_SP2.exe and the release note listed above are included. 
 
2.  Information on FIT191743 patch 
 
 - Name of release note file:   FIT191743_relnote.doc 
 - Name of patch file: 
 FIT191743.zip 
 FIT191743.exe and the release note listed above are included. 
 
 
 
 
- Information on main unit firmware version 
 
ICUM 
ICU1 
PCU 
0301S100 
0300S100 
0202S100 
 
3. Installation: 
Make sure to follow the steps below for update in order to install the patch: 
 
 
 
1. 1-1KM7HP (No need to update since it is included in SP1.) 
 
 
 
2. SP1 (It has been notified in CCE-1194.) 
 
 
 
3. SP2 (FIT38605) 
 
 
 
4. FIT191743 
 
4. Check: 
 
Print out the config in CWS (Command Work Station) after installation of the patch.  
 
 
 
Make sure the name of the relevant patches (SP2, FIT191743) is shown in PATCH ID  
 
 
 
in SYSTEM UPDATES LOG. 
 
RELEASE OF A PATCHES SP2 (FIT38065) and 
FIT191743 FOR A PRINT SERVER
 
TECHNICAL BULLETIN 
 
Date:  
11
th
 December 2013 
Model:  
Fiery MX-PE10 
Ref.:   
CCE-1218 
Colour:  
White 
Page:  
1 of 1 
 
 
 
 
 
 
 
 
 
 
 
 
      
Page 1 of 8
 
  
                                                                      
 
Disclaimer 
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is 
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies): 
1  Functionality to execute copy-protected programs 
2  Functionality to access to digital contents stored on copy-protected read-only media 
3  Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content 
4  Functionality for copying control of copyright protected audio/video data 
5  Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated 
circuits 
©2012 Electronics For Imaging 
Customer Support
 
 
Release Note  
 
 
Fiery Patch Release Notes 
 
 
 
 
 
General information 
Defect ID number 
FIT38605 
Product name 
MX-PE10 65 75 
Release date 
16 Oct 2013 
Files included in this release 
File name 
File size 
Md5 Checksum 
MX_PE_10_65_75_SP2.exe
 
15.3MB 
eef65ad519bdefce46daa317cc4740a2 
Issue(s) addressed with this release 
•  FIT38605: Release SP2 for Northstar1.0 
•  FIT38796: Load Custom paper message appears if print job as 8x20 inch paper size 
•  FIT38273: Key continue typing when waked up from windows7 sleep mode 
•  FIT191568:  Check copier power and cable connection message is shown when turn 
on MFP power 
•  FIT191557: Fiery cannot response and fall in no printing when remove ethernet 
cable during scanner calibration 
•  FIT191570: When printing out with Saddle fold+staple over 20 counts limitation 
setting, occasionally an error message display timing is not proper or it doesn't 
recovery (error release) on CWS 
•  FIT191572: Print job is canceled by fiery when print job is sent while Auto Power 
Shut-Off 
•  FIT191575: When reaching account limitation, bring it to toner not mounted status, 
although MFP status is account limit, Command WorkStation status is toner not 
mounted. 
•  FIT191581: Print job is canceled when print job is sent. Fiery does not receive the 
packet that an engine sent. 
•  FIT191578: Request to Change of SHARP logo on Webtool page 
 
 
 
 
 
 
 
 
 
 
 
 
 
      
Page 2 of 8
 
  
                                                                      
 
Disclaimer 
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is 
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies): 
1  Functionality to execute copy-protected programs 
2  Functionality to access to digital contents stored on copy-protected read-only media 
3  Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content 
4  Functionality for copying control of copyright protected audio/video data 
5  Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated 
circuits 
©2012 Electronics For Imaging 
Customer Support
 
 
Release Note  
•  FIT38810: [POPO] Remove paper from finisher Upper&lower tray msg did not go 
even after clearing the output trays 
•  FIT38568: Color separation issue observed while printing large job with mixed paper 
size & color & b/w data 
•  FIT156263: Fake Paper jam/Misfed message showed in CWS while there is no Jam 
or Misfed on the Engine LCD or Engine paper path 
•  FIT38595: [POPO]"Check copier power and cable connection was observed" on 
CWS while printing on 11X17fullbleed 
•  FIT38596: Job Cancelled by Engine at a Paper Empty scenario 
 
Steps to reproduce the Issue 
 
•  FIT38796: Load Custom paper message appears if print job as 8x20 inch paper 
size 
 
1) Put 8x20 inch paper on Bypass tray as plane paper 
2) Open a file on Excel 2010 
3) Open Printer properties then set paper size as Custom (Width:8 inch, Height:20 
inch) i Media tab 
4) Close Printer properties 
5) Select PostScript Paper size in Page Layout 
6) Perform print 
Results: Load Custom paper message appears on CWS 
•   FIT38273: Key continue typing when waked up from windows7 sleep mode 
 
1) Make fiery to sleep from "start menu" 
2) By pressing keyboard in the engine, awake the fiery from sleep mode. 
 
Results:
 
Key continue typing
 
 
•   FIT191568: [RANK A] Check copier power and cable connection message is 
shown when turn on MFP power 
 
1) Turn off MFP and wait for 10 minutes or more 
2) Turn on MFP, but Check copier power and cable connection message in CWS
 
 
 
 
 
 
 
 
 
 
 
 
 
      
Page 3 of 8
 
  
                                                                      
 
Disclaimer 
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is 
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies): 
1  Functionality to execute copy-protected programs 
2  Functionality to access to digital contents stored on copy-protected read-only media 
3  Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content 
4  Functionality for copying control of copyright protected audio/video data 
5  Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated 
circuits 
©2012 Electronics For Imaging 
Customer Support
 
 
Release Note  
Results: CWS Errors and Alerts keeps showing the message “Check
 copier power   and 
c
able “message is seen.  
•  FIT191557: Fiery cannot response and fall in no printing when remove Ethernet 
cable during scanner calibration 
 
1)Select Calibration on CWS 
2) Calibration page is printed 
3) Put Calibration chart on scanner, then perform PC scan 
4) The network cable that connects with Fiery and MFP is pulled out 
5) Perform Calibration after The calibration print succeeded message appears 
on CWS. 
Results: 
Retrieving measurements message box is remained on CWS. The 
dialog box is closed if "CANCEL" button press, but scan job is not cancel. As 
the result, any job cannot print on the fiery
 
•  FIT191570:When printing out with Saddle fold staple over 20 counts limitation 
setting, occasionally an error message display timing is not proper or it 
doesn't recovery (error release) on CWS 
Import a specific Test File to the Hold 
queue and print it
1. Open a word file of Letter LEF 24 page(Portrait) 
2. Print with below driver settings 
  Media tab
⇒Paper size...Letter SEF 
  Finishing tab
⇒Staple mode...Saddle stitch 
3.(24~22 page) is outputted with saddle fold+staple 
4. When completing print till job (21~2 page), an error message of "20 
Copies is Staple max. Continue without Stapling?" is on OPE 
5. Select "continue" in error message 
6. Resume print and 1st page is printed then print up to(21~1page) is 
stored in finisher 
7.OPE remains as Printing, on CWS an error message "Please Remove paper 
from the Saddle stapler compiler" is shown. 
8. When finisher cover is opened, message to remove paper from saddle is 
shown in OPE. 
9. Remove piled up print paper from saddle 
10. Error message in OPE disappears and complete recovery. An error 
message on CWS remains. 
【Issue】 
1.A message shown on OPE in Procedure 8 is delayed. 
2.After recovery an error message of CWS remains. 
【Expected behavior】 
Page of 11
Display

Sharp MX-PE10 FIERY (serv.man45) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp MX-PE10 FIERY (serv.man45) Service Manual ↓ Size: 247.48 KB | Pages: 11 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp MX-PE10 FIERY (serv.man45) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp MX-PE10 FIERY (serv.man45) Copying Equipment. Information contained in Sharp MX-PE10 FIERY (serv.man45) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.